GIRADISCHI
AUDIOTECNICA
ATPL120
€.420,00 Per OFFERTA
TELEFONA /E-MAIL
 .:
AT-PL120 Direct Drive Professional Stereo Turntable System :.This professional
stereo turntable features a high-torque direct-drive motor for quick start-ups
and a selectable internal stereo phono pre-amplifier that allows the turntable
to plug directly to computers and other components with no dedicated turntable
input. Other features include: forward and reverse play capability; cast
aluminum platter with slip mat and a start/stop button with remote start/stop
input; three speeds 33/45/78; selectable high-accuracy quartz-controlled pitch
lock and pitch change slider control with +/-10% or +/-20% adjustment ranges;
and removable hinged dust cover. A replaceable Audio-Technica ATP-2 cartridge is
included. Direct drive high-torque motor Selectable 33/45/78 RPM speeds
Selectable internal stereo phono pre-amplifier S-shaped tone arm assembly with:
- Adjustable counterweight - Anti-skate adjustment - Tone arm height adjustment
and lock - Tone arm lift with hydraulic action and lift lever - Tone arm rest
with locking mechanism Selectable high-accuracy quartz-controlled pitch lock
Selectable +/-10% or +/-20% pitch adjustment ranges Stroboscopic platter speed
indicator Forward and reverse play Cast aluminum record platter with slip mat
Start/stop button with remote start/stop input Pop-up stylus target light 45-RPM
adapter with storage receptacle Receptacle for extra headshell Adjustable feet
for leveling Removable hinged dust cover Includes professional cartridge
ATP-2 SPECIFICATIONS Type 3-speed, fully manual operation Motor DC motor
Drive Method Direct Drive Direct drive Speeds 33-1/3 RPM, 45 RPM, 78 RPM Pitch
Variation +/-10% or +/-20% Turntable Platter Die-cast aluminum Starting Torque
>1.6 kgm-cm Braking System Electronic brake Wow and Flutter <0.2% WRMS (33 RPM)
Signal-to-Noise Ratio >50 dB Output Level Pre-amp "Off": 2.5 mV nominal at 1
kHz, 5 cm/sec Pre-amp "On": 200 mV nominal at 1 kHz, 5 cm/sec Phono Pre-Amp Gain
38 dB nominal, RIAA equalized Pitch Output Output signal to drive remote pitch
indicator 2.5V square wave signal 675 Hz +/- 1 Hz for 33 and 45 RPM quartz
locked speeds Varies from 540 Hz - 810 Hz when +/- 20% pitch is selected Varies
from 607 Hz - 742 Hz when +/- 10% pitch is selected 1170 +/- 1 Hz for 78 RPM
Remote Start/Stop 2 conductor 1/4" connector (T/S) Normally open contact closure
Power Supply Requirements 115/230V AC, 50/60 Hz Power Consumption 13W Dimensions
17.75" (450 mm) W x 13.88" (352 mm) D x 6.0" (157 mm) H Weight 23.4 lbs. (10.6
kg) Accessories Included Headshell/cartridge (ATP-2); AC line cord; 45 RPM
adapter Replacement Cartridge: ATP-2 (Bonded round shank)
TESTINE
 
AUDIOTECNICA
AT 91BL
€.24,00 Per OFFERTA
TELEFONA /E-MAIL
:
AT91BL Cartridge :.1/2" mount cartridge with conical shaped diamond tip ideal as
a starter cartridge or as a replacement for older decks.SPECIFICATIONS Frequency
Response 20 - 20,000 Hz Channel Separation 20 dB at 1kHz Tracking Force Range
1.4 - 2.5 g Recommended Load Impedance 47,000 ohms Output 3.5 mV Stylus Shape
Conical Mount 1/2" Replacement Stylus ATN91
AUDIOTECNICA
AT 95BL
€.41,00 Per OFFERTA
TELEFONA /E-MAIL
AT95EBL
Cartridge :.1/2" mount cartridge with elliptical shaped diamond tip gives good
overall performance in modestly priced decks. SPECIFICATIONS Frequency Response
20 - 20,000 Hz Channel Separation 20 dB at 1kHz Tracking Force Range 1.4 - 2.5 g
Recommended Load Impedance 47,000 ohms Output 3.5 mV Stylus Shape Elliptical
Mount 1/2" Replacement Stylus ATN91
AUDIOTECNICA
AT 120
E/T
€. 95,00 Per OFFERTA
TELEFONA /E-MAIL
.:
AT120E/T Cartridge :.Vector-Aligned Dual Magnet design and A-T’s exclusive
Paratoroidal signal generator. .3 x .7 mil elliptical. SPECIFICATIONS Frequency
Response 15-25,000 Hz Channel Separation 25/20 (dB at 1 kHz/10 kHz) Vertical
Tracking Force 1.0-1.8 grams Stylus Construction Nude round shank Recommended
Load Impedance 47,000 ohms Output 5.0 (mV at 1 kHz, 5 cm/sec) Channel Balance
1.0 dB Stylus Shape 0.3 x 0.7 mil elliptical Cantilever Alloy tube Mount
Half-inch Replacement Stylus ATN120E
AUDIOTECNICA
AT 440
MIA
€.180,00 Per OFFERTA
TELEFONA /E-MAIL
.:
AT440MLa Dual Moving Magnet Cartridge :.MicroLine® shaped diamond tip for better
high frequency response with less wear and distortion than elliptical or
conventional linear contact styli. Dual Magnet cartridge design, Paratoroidal
generator coil circuit, a Micro-Linear stylus, PCOCC wire. SPECIFICATIONS
Frequency Response 20-20,000 Hz Channel Separation 27 (dB at 1 kHz) Tracking
Force Range 1.0-1.8 grams (1.4 optimal) Stylus Construction 0.12 mil Nude square
Micro-Linear stylus Recommended Load Impedance 47,000 ohms Output 4.0 (mV, 1
kHz, 5 cm/sec) Channel Balance 0.8 (dB at 1 KHz) Stylus Shape MicroLine™
Cantilever Tapered alloy tube Mount Half-inch Replacement Stylus ATN440MLa Coil
impedance : 3,200 ohms at 1 kHz Coil inductance (mH, 1 kHz) : 490 Dynamic
compliance (x10-6 cm/dyne) : 10 Static compliance (x10-6 cm/dyne) : 40
Dimensions (mm) : L17.3 x W 16.0 x H 28.0 Weight (g) : 6.5
AUDIOTECNICA
AT OC9ML/II
€.660,00 Per OFFERTA
TELEFONA /E-MAIL
AT-OC9ML/II
Dual Moving MicroCoil™ Cartridge :.Moving coil cartridge with polished
elliptical diamond tip, for the best in clarity, transparency, precise stereo
imaging, lower distortion and extended vinyl life. A-T Vector-Aligned design,
with two moving coils mounted at 90 degrees in place of the two moving magnets.
SPECIFICATIONS Frequency Response 15-50,000 Hz Channel Separation 31/21 (dB at 1
kHz/10 kHz) Vertical Tracking Force 1.25-1.75 grams Stylus Construction
Nude square shank Recommended Load Impedance 20 ohms Output 0.4 (mV at 1 kHz, 5
cm/sec) Channel Balance 1.0 dB Stylus Shape MicroLine™ Cantilever
Gold-plated boron Mount Half-inch Note: Moving coil cartridges require
receivers or preamps with compatible inputs; their stylus assemblies are not
field-replaceable.
AUDIOTECNICA
ATP2XN
€.53,00 Per OFFERTA
TELEFONA /E-MAIL
If
you're serious about the sound of your vinyl albums, consider this
professional-grade phono cartridge from Audio-Technica. The ATP-2XN uses a rigid,
tapered tube for the stylus cantilever, so you can safely back-cue your records
without harm. The ATP-2XN features a rugged, moving-magnet design, and even
includes a spare stylus.
PUNTINE DI RICAMBIO
| Model |
(For Cartridge) |
Stylus |
|
| ATN91 |
(AT91BL) |
Conical |
| AT95E |
(AT95EB) |
Elliptical |
| ATN101EP |
(AT101EP) |
.4 x .7 |
| ATN110E |
(AT110E) |
.4 x .7 |
| ATN120E |
(AT120E) |
.3 x .7 |
| ATN440MLa |
(AT440MLa, AT440ML, 140ML, 140LC) |
MicroLineTM |
| ATP-N2 |
(ATP-1, ATP-2) |
.4 x .7 |
AUDIOTECNICA
ATN 91 €.35,00 Per OFFERTA
TELEFONA /E-MAIL
Stilo ricambio per:
.:
AT91BL Cartridge :.1/2" mount cartridge with conical shaped diamond tip ideal as
a starter cartridge or as a replacement for older decks.SPECIFICATIONS Frequency
Response 20 - 20,000 Hz Channel Separation 20 dB at 1kHz Tracking Force Range
1.4 - 2.5 g Recommended Load Impedance 47,000 ohms Output 3.5 mV Stylus Shape
Conical Mount 1/2" Replacement Stylus ATN91
AUDIOTECNICA
ATN 95E
€.35,00 Per OFFERTA
TELEFONA /E-MAIL
Stilo ricambio per:
.:
AT95EBL Cartridge :.1/2" mount cartridge with elliptical shaped diamond tip
gives good overall performance in modestly priced decks. SPECIFICATIONS
Frequency Response 20 - 20,000 Hz Channel Separation 20 dB at 1kHz Tracking
Force Range 1.4 - 2.5 g Recommended Load Impedance 47,000 ohms Output 3.5 mV
Stylus Shape Elliptical Mount 1/2" Replacement Stylus ATN91
AUDIOTECNICA
ATN 101
EP
€.35,00 Per OFFERTA
TELEFONA /E-MAIL
Stilo ricambio per:
P
mount cartridge with elliptical shaped (0.4x0.7 mm) diamond tip for improved
tracking and long vinyl life.SPECIFICATIONS Frequency Response 20 - 22,000 Hz
Channel Separation 25 dB at 1 kHz Vertical Tracking Force 1.0 - 1.5 grams
Recommended Load Impedance 47,000 ohms Output 4 mV Stylus Shape Elliptical Mount
Universal Replacement Stylus ATN101EP
AUDIOTECNICA
ATN 110E
€.
35,00 Per OFFERTA
TELEFONA /E-MAIL
Stilo ricambio per:
.:
AT110E Cartridge :.1/2" mount cartridge with elliptical shaped (0.4 x 0.7 mm)
diamond tip ensuring good channel balance, separation and long vinyl life.
SPECIFICATIONS Frequency Response 20 - 22,000 Hz Channel Separation 25 dB at 1
kHz Vertical Tracking Force 1.0 - 1.5 grams Recommended Load Impedance 47,000
ohms Output 4 mV Stylus Shape Elliptical Mount 1/2" Replacement Stylus ATN101EP
AUDIOTECNICA
ATN 120E €.
53,00 Per OFFERTA
TELEFONA /E-MAIL
AUDIOTECNICA
ATN 440ML
€.107,00
Per OFFERTA
TELEFONA /E-MAIL
Stilo ricambio per:
.:
AT440MLa Dual Moving Magnet Cartridge :.MicroLine® shaped diamond tip for better
high frequency response with less wear and distortion than elliptical or
conventional linear contact styli. Dual Magnet cartridge design, Paratoroidal
generator coil circuit, a Micro-Linear stylus, PCOCC wire. SPECIFICATIONS
Frequency Response 20-20,000 Hz Channel Separation 27 (dB at 1 kHz) Tracking
Force Range 1.0-1.8 grams (1.4 optimal) Stylus Construction 0.12 mil Nude square
Micro-Linear stylus Recommended Load Impedance 47,000 ohms Output 4.0 (mV, 1
kHz, 5 cm/sec) Channel Balance 0.8 (dB at 1 KHz) Stylus Shape MicroLine™
Cantilever Tapered alloy tube Mount Half-inch Replacement Stylus ATN440MLa Coil
impedance : 3,200 ohms at 1 kHz Coil inductance (mH, 1 kHz) : 490 Dynamic
compliance (x10-6 cm/dyne) : 10 Static compliance (x10-6 cm/dyne) : 40
Dimensions (mm) : L17.3 x W 16.0 x H 28.0 Weight (g) : 6.5
LIQUIDO PER PULIZIA
TESTINE
AUDIOTECNICA
AT 607
€.9,00 Per OFFERTA
TELEFONA /E-MAIL
A
small aplicator brush is attached to the cap for easy stylus cleaning. The
special cleaning formula dissolves foreign material known to hinders proper
tracking. Regular use extends both stylus and record life.
Legenda istruzioni
 Clicca
per qui per vedere : FOTO PRODOTTO
Clicca
per qui per vedere : ISTRUZIONI PRODOTTO
Clicca
per qui per vedere : CATALOGO,PROVA RIVISTE SPECIALIZZATE PRODOTTO
 Clicca
per qui per vedere : DATI TECNICI SPECIFICHE
PRODOTTO
Attenzione
Per ordinare o avere
gli ultimi prezzi aggiornati telefona al
0174 670100
o invia un E-mail a info@sinergy.us
Il presente listino
sostituisce ed annulla ogni precedente.Le caratteristiche e i prezzi indicati possono variare senza
preavviso telefonare o inviare un e-mail per ulteriori domande e
conferme sui prezzi sopra riportati.
Prezzi
franco nostro magazzino.
Tutti i marchi citati nel presente listino sono di proprietà e
registrati alle rispettive Case Produttrici
| 
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
Attenzione 
