HIFI  TV  VIDEO DIFFUSORI  PROIETTORI  SAT  POLTRONE   DIVANI   ARREDO SONORIZZAZIONI AMBIENTI  HIFI  TV  VIDEO DIFFUSORI  PROIETTORI  SAT  POLTRONE   DIVANI   POLTRONE UFFICIO  ARREDO SONORIZZAZIONI AMBIENTI 


Established by Ed Meitner in 1998, EMM Labs is the world's premier designer of professional digital audio converter systems. Every day, more and more top recording engineers and organizations are buying our equipment. The fact that EMM Labs electronics are now internationally acclaimed and universally regarded as state of the art is a source of great pride to us.We are equally proud of our audiophile products. The technology is identical to that in our studio gear. So too is the sound. Which can put audiophiles in the unique position of listening to their favorite music with the same equipment that was used to record it. We invite all of you to enjoy the prospect, the equipment, and most importantly, the music along with us.


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


EMM LABS  DV2                                                                                                    Listino Ufficiale   €. 41.100,00

Convertitore DA integrato allo stato dell'arte, unisce le tecnologie sviluppate per il  modello di punta DA2 e le affianca al sistema di controllo del volume proprietario VControl™ che mantiene il segnale di ingresso privo di ri-quantizzazione, completamente trasparente a qualsiasi livello d'ascolto e senza alcuna perdita di risoluzione; convertitore MDAC™ DSD1024/16xDSD completamente discreto progettato e costruito in Canada, DSP MDAT2™ in grado di rivelare transienti in tempo reale, elaborare e convertire i segnali audio PCM, DSD e MQA® (via USB). Isolamento galvanico proprietario. Dimensioni (LxAxP): 438x161x400mm, peso 17,2kg. Versione DV2 (finitura placcata) 47.950,00

The DV2 builds on EMM Labs’ ground breaking technology used in our flagship, multi-award winning DA2 converter by integrating EMM’s high resolution volume control system (VControl™) into our discrete, single bit converter. VControl™ maintains the input signal without re-quantization allowing for complete transparency at any volume setting, wide attenuation range, and no loss of audio resolution. 16xDSD MDAC2™ and MDAT2™ DSP MDAC2™ is the worlds first fully discrete single-bit D-to-A converter with an internal conversion rate of 1024fs (16xDSD) and is completely free of inherent non-linearity that plagues every mass market chip created to date. Our MDAT2™ DSP has been refined and updated to synergistically work with the MDAC2™. The MDAT2™ DSP performs real-time transient detection in addition to processing and up-conversion of all incoming audio before being sent to the MDAC2™ for conversion. USB Isolation, MFAST™ and MCLK2™ The USB interface includes EMM’s proprietary hardware galvanic isolation. In combination with MFAST™, our high-speed asynchronous jitter removal technology and and MCLK2™ our custom built clock, jitter is completely removed from the conversion process. The DV2 features a multitude of inputs and support for PCM up to 24bit/192kHz, DSD, 2xDSD, DXD, and for the first time in any EMM Labs product, MQA® via USB. With its redesigned analog and digital systems, integrated high resolution volume control, discrete componentry, and user-friendly operation, the DV2 can be connected directly to the amplification stage in any high fidelity system with ease. Designed and manufactured in Canada for the digital audio enthusiast. Key Features Proprietary & discrete dual differential D-to-A converters (MDAC2™) New high resolution volume control system with High/Low output gain control (VControl™) Latest generation Meitner Digital Audio Translator signal processing technology (MDAT2™) Enhanced technology for instant signal acquisition and jitter-free performance (MFAST™) Proprietary asynchronous clocking system (MCLK2™) USB interface with custom hardware galvanic isolation Up to 24bit/192kHz & DSD support over all inputs 2xDSD, DXD (352/384kHz) & MQA® support over USB User controlled signal polarity Custom aerospace-grade ceramic circuit boards EMM Optilink for connection to an EMM transport Precision-machined aluminum chassis & remote control Service USB port for future software upgrades RS-232 serial port for wired remote control Power Supply: Proprietary high-isolation resonant mode power supply for silent & eco-friendly operation Factory set to 100V or 115V or 230V, 50/60Hz Maximum 30W consumption Specifications Digital inputs:EMM Optilink (CD/SACD)AES/EBU, 2x S/PDIF Coax, 2x S/PDIF, TOS & USB up to 24bit/192kHz and DSD USB also supports 2xDSD, DXD (352/384kHz) & MQA® Stereo Analog Outputs: XLR and RCA Output Impedance:300 ohms balanced (XLR) 150 ohms unbalanced (RCA) Output Levels (High/Low): XLR outputs: 7.0/5.0V (+19.1/16.2dBu) RCA outputs: 3.5/2.5V (+13.1/10.2dBu) Dimensions: W x D x H: 438 x 400 x 161mm Weight: 17.2kg

EMM LABS  DA2                                                                                                  Listino Ufficiale   €. 34.250,00

Convertitore DA allo stato dell'arte, nuovo progetto a opera di Ed Meitner che  innalza nuovamente l'asticella in termini di trasparenza, accuratezza e qualità sonora. Nuovi stadi analogici progettati da Ed Meitner che raggiungono un nuovo livello di trasparenza e prestazioni, nuovo convertitore MDAC™ DSD1024/16xDSDcompletamente discreto progettato e costruito in Canada, nuova versione del DSP MDAT2™ in grado di rivelare transienti in tempo reale, elaborare e convertire isegnali audio PCM e DSD. Isolamento galvanico proprietario. Dimensioni (LxAxP): 438x161x400mm, peso 17kg. Versione DA2 (finitura placcata) 41.100,00

Introducing the DA2 – redesigned from the ground up, it features the world’s first 16xDSD DACs and Ed’s latest generation analog stages. The combined performance of both allowing the DA2 to achieve that whole new level of transparency and performance. The DA2 also features a multitude of inputs allowing a host of connectivity options and support for DSD, 2xDSD and DXD(352 and 384kHz PCM) via USB. World’s First 16xDSD Proprietary Discrete DACs MDAC2™ is now the world’s first true fully discrete DSD1024/16xDSD D/A converter and still built in-house at our manufacturing facility in Calgary, Canada. We’re not willing to accept the inherent non-linearities of every mass-market chip created to date. Neither should you. Newly Updated MDAT2™: 16xDSD Upsampling Our multi-award winning MDAT2™ DSP has been refined and updated to synergistically work with the new 16xDSD MDAC2™. The new MDAT2™ DSP performs real-time transient detection, processing and up-conversion of all incoming audio, PCM and DSD, before sending it to the new 16xDSD DACs. New USB Isolation, MFAST™ and MCLK2™  The DA2 also has Ed’s proprietary hardware galvanic isolation for its USB interface. This allows the DA2 to further isolate its USB interface from noisy source power systems.
 Along with MDAT2™, MFAST™ our high-speed asynchronous jitter removal technology and MCLK2™ our custom built super accurate clock, has been carefully revised to work synergistically with the new 16xDSD DACs. All culminating in that next level of immersive pristine sonic clarity that has been the definition of every new EMM product.   World’s first 16xDSD proprietary discrete dual differential D-to-A converters (MDAC2™) Newly designed next generation analog stages Latest generation 16xDSD Meitner Digital Audio Translator (MDAT2™) signal processing technology Latest generation enhanced MFAST™ technology for instant signal acquisition and jitter-free performance Next generation MCLK2™ proprietary custom clock Proprietary USB interface hardware galvanic isolation 24bit,192kHz support on all PCM inputs including USB DSD, 2xDSD and DXD (352/384kHz) over USB remote control Polarity inversion performed in the digital domainUSB port for future software upgrades Serial port for wired remote control New optimized reference power system - Power factor corrected- Factory set to 100V or 115V or 230V, 50/60Hz - Power consumption: max. 30 W CE compliant Digital inputs:EMM Optilink (CD/SACD) Supports up to 24bit, 192kHz on all PCM inputs: AES/EBU, USB Audio, 2x SPDIF Coax, 2x S/PDIF Toslink USB also supports streaming DSD, 2xDSD, DXD (352 and 384kHz) Stereo Analog Outputs:XLR and RCA Output Impedance: 300 ohms balanced (XLR) 150 ohms unbalanced (RCA) Output Levels: XLR outputs: 4.6V (+15.45dBu)RCA outputs: 2.3V (+9.45dBu) Finish: Silver and Black Ultrafine CNC Precision Finish Standard black or premium 24K Gold/Silver/Custom plated insert and buttons Dimensions: W x D x H: 438 x 400 x 161mm Weight: 17.2kg

EMM LABS  DAC2X V2                                                                                         Listino Ufficiale   €. 18.645,00

Convertitore Digitale / Analogico stereo 24 bit, 44,1-192 kHz, DSD su USB (DoP 1.0), nuovo convertitore MDAC™ DSD512/8xDSD completamente discreto progettato e costruito in Canada, tecnologia MFAST™, nuova versione DSP MDAT2™, ingressi audio digitale EMM Optilink, AES EBU, USB, SPDIF coassiale, 2X SPDIF Toslink, porta d'espansione EMM. MDimensioni (LxAxP): 435x92x400mm, peso 12kg.

DAC2X V2 D/A Converter You know how it is. Digital audio data isn’t the sole domain of digital transports any longer. Today it streams from sources as diverse as your PC, music server, satellite receiver, mixing board and portable player. Which is why EMM Labs has created one very simple, very convenient way to get state-of-the-art sound from all of them. Re-introducing the multi-award winning DAC2X V2 – updated using the technology in our reference DA2. The DAC2X V2 features the latest generation MDAT2™ up-converting DSP, MFAST™ jitter removal system, MCLK™ master clock and Ed Meitner’s revised hand built DSD512/8xDSD proprietary discrete dual differential D-to-A converters. The DAC2X V2 also features a multitude of inputs allowing a host of connectivity options and support for up to 24bit,192kHz and DSD (via DoP) on all PCM inputs including USB. The DAC2X V2 also supports up to DSD128/2xDSD and DXD (352 and 384kHz) streaming over USB Audio. Proprietary hardware galvanic isolation for the USB Audio interface. MFAST™ vs. conventional PLLs Most converters utilize PLL (Phase Lock Loop) circuits. MFAST™ has two distinct advantages. It’s a high-speed asynchronous system that acquires any data stream almost instantaneously. Moreover, unlike PLLs which merely attenuate jitter, MFAST™ strips jitter out of the audio stream completely. Enabling you to enjoy pristine sonic clarity whether the incoming data stream is pure or anything but. New Updated MDAT2™: DSD512/8xDSD Upsampling The Updated Meitner Digital Audio Translator (MDAT2™) upsamples digital audio to DSD512/8xDSD. Eight times that of standard SACD sampling rate. Proprietary DSD512/8xDSD Discrete Dual Differential D-to-A Converters We were not willing to accept the inherent non-linearities of every mass-market chip created to date. Neither should you. Key Features Latest generation MFAST™ technology for instant signal acquisition, jitter-free performance Latest generation DSD512/8xDSD Meitner Digital Audio Translator (MDAT2™) signal processing technology Latest generation DSD512/8xDSD proprietary discrete dual differential D-to-A converters Exclusive aerospace-grade composite laminate circuit boards EMM Optilink proprietary interface for connection to matching TSDX CD/SACD Transport Precision-machined aluminum chassis Precision-machined aluminum infrared remote control Polarity inversion performed in the digital domain 24bit,192kHz and DSD support on all PCM inputs including USB DSD, DSD128/2xDSD and DXD (352 and 384kHz) streaming over USB (DoP specification)Galvanically isolated USB audio interface USB port for future software upgrades Serial port for wired remote control New optimized reference power system - Power factor corrected - Factory set to 100V or 115V or 230V, 50/60Hz - Power consumption: max. 25 W CE compliant Specifications Digital inputs: EMM Optilink (CD/SACD) Supports up to 24bit, 192kHz and DSD (via DoP) on all PCM inputs: AES/EBU, USB Audio, 2x SPDIF Coax, 2x S/PDIF Toslink USB Audio also supports streaming DSD, 2xDSD, DXD (352 and 384kHz) Stereo Analog Outputs: XLR and RCA Output Impedance: 300 ohms balanced (XLR) 150 ohms unbalanced (RCA) Output Levels: XLR outputs: 4.6V (+15.45dBu) RCA outputs: 2.3V (+9.45dBu) Dimensions: W x D x H: 435 x 400 x 92mm Weight: 12kg


EMM LABS/MEITNER  MA-1 V2                                                                               Listino Ufficiale   €. 10.175,00

Convertitore stereo Digitale / Analogico 24 bit, da 44,1 a 192kHz, nuovo convertitore MDAC™ DSD512/8xDSD completamente discreto progettato e costruito in Canada, tecnologia MFAST™, nuova versione DSP MDAT2™, sei ingressi digitali (1 x USB, 1 x AES/EBU, 2 x TOSLINK S/PDIF, 2 x COAX S/PDIF). Dimensioni (LxAxP): 435x92x400mm, peso: 7,43kg

Meitner Stereo D/A Converter With the introduction of Meitner Audio's very first product—the Meitner MA-1 Stereo D/A Converter—cost-no-object performance has suddenly become a whole lot less costly.  How did we do it? By utilizing the award-winning technologies Ed Meitner developed for our EMM Labs line of products. The result is a converter that turns the "you-have-to-spend-a-lot-to-get-a-lot" paradigm on its proverbial ear?  It also happens to turn your computer or media server into a high-end, high-resolution music-making machine.  The Meitner MA-1:  • Supports sampling rates of 44.1, 48, 88.2, 96, 176.4 and 192kHz at  word lengths up to 24 bits through all 6 digital inputs  • Complies with the USB Class 2 audio interface standard  • Is simple to use. There's nothing to configure. Just plug and play.  MFAST™ asynchronous technology  Feed the MA-1 through any of its six inputs and the Meitner Frequency Acquisition System (MFAST™) instantly acquires the signal, buffers it, then strips jitter out completely. A high-speed asynchronous system, it decouples input from output. MFAST™ ensures that you'll enjoy pristine sonic clarity whether the incoming data stream is pure or anything but.  MDAT™: 2x DSD upsampling  From there, the signal goes straight into the Meitner Digital Audio Translator (MDAT™) which upsamples digital audio to 5.6MHz, double the SACD standard sampling rate.  The world's best dac/clock combination  Our MA-1 features the standard-setting MDAC™ dual differential discrete D-to-A and MCLK™ high-purity master clock modules. Together, they're music to our ears. Yours too, as an audition will quickly prove.  The Meitner MA-1 Stereo D/A Converter. It may be the first audio product that's equally appealing to those on a budget, and those with no budget limitations at all. Key Features & Specifications: • Supported sampling rates of 44.1, 48, 88.2, 96, 176.4 and 192kHz at word  lengths up to 24 bits through all 6 digital inputs: • 1 x USB • 1 x AES/EBU• 2 x TOSLINK S/PDIF• 2 x COAX S/PDIF • MFAST™ asynchronous technology for instant signal acquisition, jitter-free performance • MDAT™ signal processing technology:• Provides 2x DSD upsampling for PCM playback• Preserves phase, frequency and dynamic integrity of the waveform• MDAC™ discrete dual differential D-to-A conversion circuit• MCLK™ high-purity master clock that establishes new benchmarks in jitterperformance • Sleek credit-card style remote control included for input switching• USB service port for future software upgrades• Serial port for wired remote control• Power supply:• Power factor corrected• Universal 90V-260V, 50/60Hz• Power consumption: max. 50W• CE Approved Stereo analog outputs: Balanced (XLR) and Unbalanced (RCA)Output voltage (with 0dBfs input):• XLR outputs: 4.6Vrms (+15.4dBu)• RCA outputs: 2.3Vrms (+9.4dBu)Output impedance:• 300 ohms balanced (XLR) • 150 ohms unbalanced (RCA Dimensions W x D x H: 435 x 400 x 92mm Weight: 7.43 kg/16.39 lbs net with remote control


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


EMM LABS/MEITNER  PRE 2                                                                     Listino Ufficiale   €. 25.625,00

Preamplificatore stereo, funzionamento ad alto isolamento (consumi e rumore ridotti), 2 coppie di ingressi XLR, 4 coppie di ingressi RCA, 1 RCA loop, 1 coppia di uscite XLR, 1 RCA, porta seriale RS232 per controllo remoto cablato e controllo multisistema. Dimensioni (LxAxP): 435x92x400mm, peso 12kg

The PRE2-SE embodies our recognition that the analog preamp at the heart of every music system deserves the very best treatment because it handles every sound your system makes. Built on the heritage of the famous PA6i Meitner preamp, the PRE2-SE updates Ed Meitner's classic to take a place at the forefront of 21st century preamp performance.Eminent recording and mastering engineer Tom Jung explains: "Ed Meitner is the only guy on the planet who has an equally good understanding of both digital and analog circuitry."The PRE2-SE features six analog inputs, a recording loop, infrared remote control, multichannel ganging and, most importantly, stunning transparency. Due, in no small part, to the extraordinarily sophisticated contactless switching system, discrete circuitry, and the (proprietary) volume control. Several PRE2-SE's can be daisy-chained via serial control port to provide the purest multichannel preamplifier operations.  The PRE2-SE also features our aerospace-grade composite laminate circuit boards. These provide several performance advantages over conventional boards: Copper traces are microscopically smooth on top and bottom, significantly reducing skin effect issues  Naturally damped sandwich construction offers superior strength and vibration resistance  Lower dielectric losses and superior heat conduction ensure a more uniform temperature gradient across the circuitry, increasing stability and longevity All of this makes the PRE2-SE the most sophisticated solid-state analog preamp ever created. Use it in your audio system and you'll be able to control everything. Except, of course, your enthusiasm.

EMM LABS  PRE                                                                                         Listino Ufficiale   €. 42.605,00

Preamplificatore stereo di riferimento, 3 ingressi bilanciati XLR, 3 ingressi single ended RCA, 2 uscite bilanciate XLR, 1 uscita single ended RCA, Classe A, percorsi di segnale bilanciati discreti, circuiti stampati di grado aerospaziale, porta seriale RS232 per controllo remoto cablato e controllo multisistema. Dimensioni (LxAxP): 438x161x400mm, peso 17,2kg

   Ed Meitner recognizes that the analog preamplifier is at the heart of every music system and warrants the utmost care and precision. This recognition motivates him to consistently push the boundaries of performance in his designs. Starting with the Meitner PA6i and progressing to the multi-award winning EMM Labs PRE2, he has never failed to push the state-of-the-art in the industry. Ed Meitner’s latest design, the reference PRE, embodies this drive for perfection and culminates in his most significant statement in the preamplifier category to date. Stunning transparency is achieved via fully discrete dual-balanced signal paths, sophisticated contactless switching solutions and precision software-driven analog volume control. Using custom, aerospace-grade, composite laminate circuit boards in the PRE provides several advantages over conventional boards: Microscopically smooth copper traces resulting in a reduction in skin effect issues Superior strength and vibration resistance Lower dielectric losses and superior heat conduction ensuring uniform temperature distribution, increasing stability and longevity With six sets of stereo analog inputs and three sets of stereo analog outputs, the PRE allows the option of bi-amplification and tri-amplification setups. Three sets of user programmable volume presets per input allows the user to easily recall their favourite volume settings for different types of music. Result… the most sophisticated and musically accurate preamplifier from EMM Labs. Capable of controlling everything, except your enthusiasm. Key Feature   Six Stereo Analog Inputs: Three Balanced (XLR), Three Single-ended (RCA) Three Stereo Analog Outputs: Two Balanced (XLR), One Single-ended (RCA)       Fully discrete dual-balanced signal paths Class A circuitry to drive loads without degradation Precision software-based analog volume control Aerospace-grade composite laminate circuit boards Machined aluminum infrared remote control Large display with customizable brightness & contrast New intuitive control system featuring programmable input settings & three sets of volume preset per input System USB port for future software updates RS232 port for wired remote & multi-system control CE compliant Power Supply: Proprietary High-isolation resonant mode power supply for silent, & eco-friendly operation Factory set to 100V or 115V or 230V, 50/60Hz Power consumption: max. 40W Specifications S/N ratio: Better than 100 dB at 4V RMS output (unweighted, 80kHz bandwidth) THD: less than 0.004% Frequency range: 0Hz-200kHz Gain control range: Better than 74dB Maximum input level: +18 dBu (6.2V RMS) Input impedance: Balanced XLR – 40kΩ, Single-Ended RCA – 20kΩ Output impedance: Balanced XLR – 150Ω, Single-Ended RCA – 75Ω System gain: +6dB Finish: Silver or Black with Black insert and buttons. Premium custom plated options available. Dimensions W x D x H: 438 x 400 x 161mm Weight: 17.2kg


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


EMM LABS  MTRX2                                                                          Listino Ufficiale   €.  104.640,00

Amplificatori monofonici basati sul modello MTRX, 1.000 W su 4 Ohm. Circuitazione proprietaria di Meitner con zero retroazione negativa, apparecchitotalmente discreti che offrono distorsione ultra bassa, banda elevatissima e lacapacità di erogare istantaneamente enormi quantità di corrente, percorsi di segnale brevi e totalmente bilanciati, protezioni impeccabili per l'amplificatore e i diffusori collegati. Dimensioni (LxAxP): 544x584x297mm, peso 82kg cadauno
MTRX2 1KW Mono Amplifiers Hot on the heels of Ed Meitner’s ground breaking reference MTRX amplifier, comes the eagerly anticipated debut of its smaller sibling monoblocks, the MTRX2. The MTRX2s are 1KW Class A/B solid-state powerhouses built using MTRX technology. Capable of driving the most fiendish and complex speaker loads effortlessly, while sounding as sweet, musical and detailed as a classic single-ended triode tube amps. "It is truly a gentle giant," as Ed would say. The MTRX2 monoblocks achieve their superlative performance and transparency using 21st century technology, along with proprietary Meitner circuit topologies and zero overall negative feedback developed in Ed’s reference MTRX monoblocks. These monoblocks have been meticulously designed, from its short and fully balanced audio paths throughout, to its proprietary power systems and beautifully finished chassis and custom plated panels. MTRX2 systems are fully discrete, offering ultra low distortion, very high bandwidth and the ability to deliver massive transient currents instantaneously. It also employs our custom made ceramic PCB boards plus a host of proprietary systems for speaker protection and self-protection. Conservatively rated at 1000W into 4Ω. The MTRX2 is also completely stable driving difficult, complex loads, and has the uncanny ability to drive low impedance speakers down to an Ohm! All while keeping distortion at miniscule levels. The MTRX2 monoblock amplifiers just like our reference MTRX amplifiers are designed, manufactured, and built in Canada with no compromise. Specifications Frequency Response: DC - 500Khz (Full Rated Power)Signal to Noise: > 120dB (A Weighted)THD+N : < 0.005% (20-20Khz, Full Rated Power)IMD: < 0.005%Slew Rate: > 100V/μS Damping Factor: > 1000 Inputs: 1 Balanced (XLR) 1 Un-balanced (RCA) 1 RS-232 Communication Port 1 USB Communication Port 1 250V/30A IP44 Industrial Power Inlet Input impedance: 100KΩ Balanced (XLR) 100KΩ Un-balanced (RCA) Outputs: 2 Sets Furutech Binding Posts Output Power: M1000W into 4Ω Power: 100/115/240V, 50/60Hz (Factory Built) Finish: Silver and Black Ultrafine CNC Precision Finish Standard black or premium 24K Gold/Silver/Custom plated insert and power button Custom Kimber Kable 30A Power Cable Custom EMM Labs Flight Case Amplifier Dimensions (W x D x H): 544 x 584 x 297 mm, 21.4 x 23 x 11.7 inches Weight: 82kg, 180lbs

EMM LABS  MTRX                                                                                 Listino Ufficiale   €. 160.000,00

Amplificatori monofonici, 750 W su 8 Ohm, 1.500 W su 4 Ohm e capacità dipilotare carichi inferiori ai 2 Ohm. Circuitazione proprietaria di Meitner con zeroretroazione negativa, apparecchi totalmente discreti che offrono distorsione ultrabassa, banda elevatissima e la capacità di erogare istantaneamente enormiquantità di corrente, percorsi di segnale brevi e totalmente bilanciati, protezioniimpeccabili per l'amplificatore e i diffusori collegati.Dimensioni (LxAxP): 544x765x351, peso 100kg cadauno.
MTRX Reference Mono Amplifiers EMM Labs celebrates the eagerly anticipated return of designer Ed Meitner to the world of power amplifiers with the debut of his MTRX reference monoblocks. It has been 20 years since the last Meitner amplifier and we believe the MTRX is well worth the wait. More than a decade in the making, these 1500W Class A/B solid-state powerhouses are able to drive the most fiendish and complex speaker loads effortlessly, while sounding as sweet, musical and detailed as a classic single-ended triode tube amps. "It is truly a gentle giant," as Ed would say. The MTRX monoblocks achieve their superlative performance and transparency using 21st century technology with proprietary Meitner circuit topologies and zero overall negative feedback. Its systems are fully discrete, offering ultra low distortion, very high bandwidth and the ability to deliver massive transient currents instantaneously. It also employs our custom made ceramic PCB boards plus a host of proprietary systems for speaker protection and self-protection. These monoblocks have been meticulously designed, from its short and fully balanced audio paths throughout, to its proprietary power systems and beautifully finished chassis and custom plated panels. Conservatively rated at 750W into 8Ω and 1500W into 4Ω. The MTRX is also completely stable driving difficult, complex loads, and has uncanny ability to drive low impedance speakers down to an Ohm! All while keeping distortion at miniscule levels. Simply put, the MTRX monoblocks are the finest, most innovative, state-of-the-art amplifiers Ed has ever produced. Designed, manufactured, and built in Canada with no compromise. The MTRX amplifiers are truly worthy of the moniker “Reference”. Specifications Frequency Response: DC - 500Khz (Full Rated Power) Signal to Noise: > 120dB (A Weighted) THD+N : < 0.005% (20-20Khz, Full Rated Power)IMD: < 0.005% Slew Rate: > 100V/μS Damping Factor: > 1000 Inputs: 1 Balanced (XLR) 1 Un-balanced (RCA)1 RS-232 Communication Port 1 USB Communication Port 1 250V/30A IP44 Industrial Power Inlet Input impedance: 100KΩ Balanced (XLR) 100KΩ Un-balanced (RCA) Outputs: 2 Sets of Furutech Binding Posts Output Power: 750W into 8Ω 1500W into 4Ω Power: 100/115/240V, 50/60Hz (Factory Built) Finish: Silver and Black Ultrafine CNC Precision Finish Standard black or premium 24K Gold/Silver/Custom plated insert and power button Custom Kimber Kable 30A Power CableCustom EMM Labs Flight Case Amplifier Dimensions (W x D x H): 544 x 765 x 351 mm, 21.4 x 30.1 x 13.8 inches Weight: 100kg, 220lbs
 


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


EMM LABS/MEITNER  MA-2                                                                       Listino Ufficiale   €.  12.215,00

Lettore CD con convertitore D/A integrato, 24 bit, da 44,1 a 192 kHz, 4 ingressidigitali (USB, AES/EBU, TOSLINK S/PDIF, COAX S/PDIF), streaming DSD su USB(specifiche DoP 1.0), tecnologie MFAST™ (acquisizione asincrona del segnale,prestazioni prive di jitter), MDAT™ (elaborazione segnale, sovracampionamentocon mantenimento di fase, frequenza e integrità dinamica della forma d'onda),MDAC™ (circuito discreto doppio differenziale di conversione D/A), MCLK™ (clock master di elevata purezza che stabilisce nuovi riferimenti nelle prestazioni del jitter).Dimensioni (LxAxP): 435x140x400mm, peso: 9kg.
Meitner Integrated Playback SystemThese days, audiophiles want more from their digital devices than mere CD playback. "More" is just what the Meitner Audio MA-2 Integrated Playback System delivers. So much more, in fact, we invite you to think of it as the digital equivalent of a yes man—an obedient servant that does everything you ask of it and more without question. Like what, you ask? "Will it get the most from my Red Book discs?" Yes, absolutely. The MA-2's advanced new slot-loading transport utilizes technology we developed for the state-of-the-art EMM Labs XDS1 player to isolate the transport electrically and mechanically from the converter. Your Red Book discs are read quickly, quietly and then played back flawlessly. "Can it play my 24/192 computer files over USB?" Yes, asynchronously. And that's just the beginning. After all, the MA-2 is based on the critically acclaimed MA-1 converter. So there's full asynchronous support from 44.1kHz to 192kHz through all four digital inputs, not just USB. "Can it stream DSD over USB?" Yes, natively. It's a function, and benefit, of our proprietary technology: MFAST™ asynchronous technology. The Meitner Frequency Acquisition System instantly acquires the signal, then buffers and decouples it from the sending source, thus stripping out jitter completely.  MDAT™: 2x DSD upsampling. The Meitner Digital Audio Translator upsamples digital audio to 5.6 MHz, double the SACD standard sampling rate.  MDAC™ and MCLK™ Our standard-setting dual differential discrete D-to-A and high-purity master clock modules ensure end-to-end signal integrity.  All of which leads to the obvious question: Should you make it a point to audition the MA-2? We're confident you can answer that one yourself. Key Features & Specifications: • Advanced slot-loading transport for Red Book CD playback  • Supported sampling rates of 44.1, 48, 88.2, 96, 176.4 and 192kHz at word lengths up to 24 bits through all 4 digital inputs:• 1 x USB• 1 x AES/EBU• 1 x TOSLINK S/PDIF• 1 x COAX S/PDIF• DSD streaming over USB (DoP 1.0 specification)  • MFAST™ asynchronous technology for instant signal acquisition, jitter-free performance • MDAT™ signal processing technology: • Provides 2x DSD upsampling for PCM playback • Preserves phase, frequency and dynamic integrity of the waveform • MDAC™ discrete dual differential D-to-A conversion circuit • MCLK™ high-purity master clock that establishes new benchmarks in jitter performance • Multifunction infrared remote control• USB service port for future software upgrades• RS232 serial port for wired remote control• Power supply:• Power factor corrected• Universal 90V-260V, 50/60Hz• Power consumption: max. 50W • CE Approved Stereo analog outputs: Balanced (XLR) and Unbalanced (RCA) Output voltage (with 0dBfs input): • XLR outputs: 4.6Vrms (+15.4dBu) • RCA outputs: 2.3Vrms (+9.4dBu) Output impedance: • 300 ohms balanced (XLR) • 150 ohms unbalanced (RCA) Dimensions W x D x H: 435 x 400 x 140mm Weight: 9.0 kg/19.8 lbs net with remote control

Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it



 Legenda istruzioni

Clicca per qui per vedere :  FOTO PRODOTTO

Clicca per qui per vedere :  ISTRUZIONI PRODOTTO

Clicca per qui per vedere :  CATALOGO,PROVA RIVISTE SPECIALIZZATE PRODOTTO


Nota  bene *

Per ordinare o avere gli ultimi prezzi aggiornati telefona al  0174 670100 o invia un E-mail a   info@newaudio.it

*I prezzi indicati  sono  di  listino  ufficiale  delle case produttrici ,nel  caso  di  diffusori  si  riferisce al prezzo  del  singolo  diffusore  per  offerte  ed  eventuali  promozioni  telefonare o  inviare e-mail.

*Il presente listino sostituisce ed annulla ogni precedente. Le caratteristiche e i prezzi indicati  possono variare senza preavviso telefonare o inviare un e-mail per ulteriori domande e conferme sui prezzi sopra riportati.

*Tutti i marchi citati nel presente listino sono di proprietà e registrati alle rispettive Case Produttrici

*Prezzi franco nostro magazzino


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it