TV  LCD    PLASMA     VIDEO      HIFI   COMPUTER    SAT      TELEFONIA      CAR     STEREO   SONORIZZAZIONI AMBIENTI

Home
Su

  Attenzione       

Per ordinare o avere   gli ultimi prezzi aggiornati telefona   0174 670100

o invia un  E-mail a info@sinergy.us

Spedizioni in tutto il

          MONDO

PIEDINI SMORZANTI

Telefona o invia un  e-mail per avere l'ultimo prezzo   0174 670100   Telefona o invia un  e-mail per avere l'ultimo prezzo 0174 670100  info@sinergy.us

AUDIOQUEST Q FEET   €.125,00 Per prezzo scontato TELEFONARE/EMAIL

Sistema SorboGel Q Feet -Confezione composta da 4 smorzatori di energia dotati di “alloggiamento”. Ogni smorzatore supporta fi no a 4kg.

Set of 4 energy absorbing feet with "tray" which improves performance and protects furniture. Each Foot supports up to 8 lbs. (4 kg.)

CAVI ALIMENTAZIONE

Telefona o invia un  e-mail per avere l'ultimo prezzo   0174 670100   Telefona o invia un  e-mail per avere l'ultimo prezzo 0174 670100  info@sinergy.us

AUDIOQUEST NRG-1 0.9m   €. 60,00  Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST NRG-1 1.8m          €. 75,00  Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST NRG-1 3,0m              €. 95,00  Per prezzo scontato TELEFONARE/EMAIL 

AUDIOQUEST NRG-1 6,1m              €.145,00 Per prezzo scontato TELEFONARE/EMAIL  

THE CHALLENGE: No matter how perfect an AC power source, distortion is added within any cable carrying AC, especially within any stranded cable. Even the most sophisticated power supplies and filters cannot completely eliminate these upstream irregularities.THE SOLUTION: NRG-1EU uses solid Long-Grain Copper (LGC) conductors in a Quad-Helix configuration. Solid conductors prevent strand interaction, which is the greatest single source of distortion in an audio cable or in an AC power cable. The less complicated grain structure and fewer impurities within LGC copper significantly reduce distortion compared to normal high-purity copper. The Quad-Helix spiral creates a fixed low-inductance relationship between conductors.NRG-1EU’s RF Stopper filters Radio Frequency Interference in both directions. It reduces outside interference entering the equipment, and it prevents equipment generated interference (as from all digital equipment and tuners) from reaching other equipment in the system.

AUDIOQUEST NRG-1.5 0.9m€.105,00 Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST NRG-1.5 1.8m         €.150,00  Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST NRG-1.5 3,0m          €.210,00  Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST NRG-1.5 6,1m          €.360,00 Per prezzo scontato TELEFONARE/EMAIL

THE CHALLENGE: No matter how perfect an AC power source, distortion is added within any cable carrying AC, especially within any stranded cable. Even the most sophisticated power supplies and filters cannot completely eliminate these upstream irregularities.THE SOLUTION: NRG-1.5EU uses solid Perfect-Surface Copper (PSC) conductors in a Quad-Helix configuration. Solid conductors prevent strand interaction, which is the greatest single source of distortion in an audio cable or in an AC power cable. The nearly perfect surface finish and interior grain structure of PSC copper dramatically reduce distortion compared to OFHC or other metals. The Quad-Helix spiral creates a fixed low-inductance relationship between conductors.NRG-1.5EU’s two RF Stoppers filter Radio Frequency Interference in both directions. They reduce outside interference entering the equipment, and they prevent equipment generated interference (as from all digital equipment and tuners) from reaching other equipment in the system

AUDIOQUEST NRG-2 0.9m   €.105,00 Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST NRG-2 1.8m              €.150,00 Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST NRG-2 3,0m               €.210,00 Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST NRG-2 6,1m              €.360,00 Per prezzo scontato TELEFONARE/EMAIL

THE CHALLENGE: No matter how perfect an AC power source, distortion is added within any cable carrying AC, especially within any stranded cable. Even the most sophisticated power supplies and filters cannot completely eliminate these upstream irregularities.THE SOLUTION: NRG-2EU uses solid Long-Grain Copper (LGC) conductors in a Self Shielding Counter-Spiral Hyperlitz. Solid conductors prevent strand interaction, which is the greatest single source of distortion in an audio cable or an AC power cable. The less complicated grain structure and fewer impurities within LGC copper significantly reduce distortion compared to normal high-purity copper. The Counter-Spiral geometry minimizes conductor interaction while maintaining a fixed low-inductance relationship between conductors.NRG-2EU’s RF Stopper filters Radio Frequency Interference in both directions. It prevents outside interference from entering the equipment, and prevents equipment generated interference (from all digital equipment and tuners) from reaching other equipment in the system.

AUDIOQUEST NRG-3 0.9m €.210,00 Per prezzo scontato TELEFONARE/EMAIL 

AUDIOQUEST NRG-3 1.8m           €.300,00 Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST NRG-3 3,0m           €.420,00 Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST NRG-3 6,1m          €.720,00  Per prezzo scontato TELEFONARE/EMAIL

THE CHALLENGE: No matter how perfect an AC power source, distortion is added within any cable carrying AC, especially within any stranded cable. Even the most sophisticated power supplies and filters cannot completely eliminate these upstream irregularities.THE SOLUTION: NRG-3EU uses solid Perfect-Surface Copper (PSC) conductors in a Self Shielding Counter-Spiral Hyperlitz. Solid conductors prevent strand interaction, which is the greatest single source of distortion in an audio cable or an AC power cable. The nearly perfect surface finish and interior grain structure of PSC copper dramatically reduce distortion compared to OFHC or other metals. The Counter-Spiral geometry minimizes conductor interaction while maintaining a fixed low-inductance relationship between conductors.NRG-3EU’s two RF Stoppers filter Radio Frequency Interference in both directions. They prevent outside interference from entering the equipment, and they prevent equipment generated interference (from all digital equipment and tuners) from reaching other equipment in the system.

AUDIOQUEST NRG-5 0.9m €.455,00  Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST NRG-5 1.8m           €.650,00  Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST NRG-5 3,0m           €.910,00  Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST NRG-5 6,1m         €.1.560,00  Per prezzo scontato TELEFONARE/EMAIL

THE CHALLENGE: No matter how perfect an AC power source, distortion is added within any cable carrying AC, especially within any stranded cable. Even the most sophisticated power supplies and filters cannot completely eliminate these upstream irregularities.
THE SOLUTION: NRG-5EU uses solid Perfect-Surface Copper+ (PSC+) conductors in a Self Shielding Counter-Spiral Hyperlitz. Solid conductors prevent strand interaction, which is the greatest single source of distortion in an audio cable or an AC power cable. PSC+ copper’s exceptionally high purity, nearly perfect surface finish, and refined interior grain structure dramatically reduce distortion compared to OFHC or other metals. The Counter-Spiral geometry minimizes conductor interaction while maintaining a fixed low-inductance relationship between conductors.NRG-5EU ’s two RF Stoppers filter Radio Frequency Interference in both directions. They prevent outside interference from entering the equipment, and they prevent equipment generated interference (from all digital equipment and tuners) from reaching other equipment in the system.

Cavi SEGNALE RCA/RCA

Telefona o invia un  e-mail per avere l'ultimo prezzo   0174 670100   Telefona o invia un  e-mail per avere l'ultimo prezzo 0174 670100  info@sinergy.us

AUDIOQUEST  ALPHA-SNAKE 0,5m  €.26,00 Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST  ALPHA-SNAKE 0,75m         €.27,00 Per prezzo scontato TELEFONARE/EMAIL  

AUDIOQUEST  ALPHA-SNAKE 1,0m           €.29,00 Per prezzo scontato TELEFONARE/EMAIL  

AUDIOQUEST  ALPHA-SNAKE 1,5m          €.33,00 Per prezzo scontato TELEFONARE/EMAIL 

AUDIOQUEST  ALPHA-SNAKE 2,0m          €.36,00 Per prezzo scontato TELEFONARE/EMAIL 

AUDIOQUEST  ALPHA-SNAKE 3,0m          €.43,00 Per prezzo scontato TELEFONARE/EMAIL  

AUDIOQUEST  ALPHA-SNAKE 4,5m           €.53,00 Per prezzo scontato TELEFONARE/EMAIL  

Per  dimensioni  maggiori telefonare  o leggere pdf

At first glance, Alpha-Snake’s design looks like a traditional coaxial cable. However, there are many very important differences, each of which greatly influences sound quality.DESIGN BASICS: Alpha-Snake has identical conductors for the positive and ground connections. Underneath the 100% coverage foil shield is a bare conductor, exactly the same as the insulated center conductor. The conductor under the shield does double duty as a low distortion audio connection, and as the drain wire connecting the shield to ground.CONDUCTORS: Both of Alpha-Snake’s conductors are solid. Electrical and magnetic interaction between strands in a conventional cable is the greatest source of distortion, often causing a somewhat dirty harsh sound. Solid conductors are the most important ingredient enabling Alpha-Snake’s very clear sound.METAL: Alpha-Snake’s LGC (Long Grain Copper) allows a smoother and clearer sound than cables using regular OFHC (Oxygen-Free High-Conductivity) copper. OFHC is a general metal industry specification regarding “loss,” without any concern for distortion. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance.

AUDIOQUEST  G-SNAKE 0,5m        €.39,00 Per prezzo scontato TELEFONARE/EMAIL  

AUDIOQUEST  G-SNAKE 0,75m            €.42,00 Per prezzo scontato TELEFONARE/EMAIL  

AUDIOQUEST  G-SNAKE 1,0m                  €.45,00 Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST  G-SNAKE 1,5m                  €.51,00 Per prezzo scontato TELEFONARE/EMAIL 

AUDIOQUEST  G-SNAKE 2,0m                  €.57,00 Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST  G-SNAKE 3,0m                  €.68,00 Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST  G-SNAKE 4,5m                 €.86,00  Per prezzo scontato TELEFONARE/EMAIL

Per  dimensioni  maggiori telefonare  o leggere pdf

At first glance, G-Snake’s design looks like a traditional coaxial cable. However, there are many very important differences, each of which greatly influences sound quality.
DESIGN BASICS: G-Snake has identical conductors for the positive and ground connections. Underneath the 100% coverage foil shield is a bare conductor, exactly the same as the insulated center conductor. The conductor under the shield does double duty as a low distortion audio connection, and as the drain wire connecting the shield to ground.CONDUCTORS: Both of G-Snake’s conductors are solid. Electrical and magnetic interaction between strands in a conventional cable is the greatest source of distortion, often causing a somewhat dirty harsh sound. Solid conductors are the most important ingredient enabling G-Snake’s very clear sound.METAL: G-Snake’s LGC (Long Grain Copper) allows a smoother and clearer sound than cables using regular OFHC (Oxygen-Free High-Conductivity) copper. OFHC is a general metal industry specification regarding “loss,” without any concern for distortion. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance.NSULATION: Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation, circuit board materials all absorb energy (loss). Some of this energy is stored and then released as distortion. The general cable industry ranks insulating materials by loss, with little regard for distortion. AudioQuest ranks materials by damage to an audio signal. The PVC used in G-Snake has too much loss to be used in a quality video cable, but it has a very benign distortion profile through the audio range, keeping G-Snake’s sound pleasant and natural. TERMINATIONS: Precision gold plated plugs are carefully attached with the very best solder. Through choice of flux and metallurgy, AQ solder has been optimized to make a low distortion connection. All solder, including “silver solder,” is a poor conductor. The difference you hearbetween solders is a result of connection quality. AQ Solder does not have a high silver content because the more silver there is in solder, the more difficult it is to make a good connection.A combination of these major ingredients, and many more subtle details add up to explain how even an inexpensive cable like G-Snake can sound so good.

AUDIOQUEST  Sidewinder 0,5m    €.67,00  Per prezzo scontato TELEFONARE/EMAIL  

AUDIOQUEST  Sidewinder 0,75m         €.72,00  Per prezzo scontato TELEFONARE/EMAIL 

AUDIOQUEST  Sidewinder 1,0m              €.76,00  Per prezzo scontato TELEFONARE/EMAIL 

AUDIOQUEST  Sidewinder 1,5m              €.85,00  Per prezzo scontato TELEFONARE/EMAIL 

AUDIOQUEST  Sidewinder 2,0m              €.94,00  Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST  Sidewinder 3,0m            €.112,00  Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST  Sidewinder 4,5m             €.139,00  Per prezzo scontato TELEFONARE/EMAIL 

Per  dimensioni  maggiori telefonare  o leggere pdf

At first glance, Sidewinder's design looks like a traditional coaxial cable. However, there are many very important differences, each of which greatly influence sound quality. DESIGN BASICS: Sidewinder has identical conductors for the positive and ground connections. Underneath the 100% coverage foil shield is a bare conductor, exactly the same as the insulated center conductor. The conductor under the shield does double duty as a low distortion audio connection, and as the drain wire connecting the shield to ground. CONDUCTORS: Both of Sidewinder's conductors are solid. Electrical and magnetic interaction between strands in a conventional cable is the greatest source of distortion, often causing a somewhat dirty harsh sound. Solid conductors are the most important ingredient enabling Sidewinder's very clear sound. METAL: Sidewinder's LGC (Long Grain Copper) allows a smoother and clearer sound than cables using regular OFHC (Oxygen Free High Conductivity) copper. The "HC" in OFHC means High Conductivity. OFHC is a general metal industry specification as to "loss," without any concern for distortion. LGC, with it's fewer oxides within the conducting material, less impurities and less grain boundaries, has better performance. INSULATION:Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation, circuit board materials all absorb energy (loss). Some of this energy is stored and then released as distortion. Sidewinder uses air filled FPE (Foamed Polyethylene) insulation on both conductors because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile.  Thanks to all the air in FPE, it causes much less of the out-of-focus effect common to other materials. INSULATION:Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation, circuit board materials all absorb energy (loss). Some of this energy is stored and then released as distortion. Sidewinder uses air filled FPE (Foamed Polyethylene) insulation on both conductors because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile.  Thanks to all the air in FPE, it causes much less of the out-of-focus effect common to other materials. TERMINATIONS:Precision gold plated plugs are carefully attached with the very best solder. Through choice of flux and metallurgy, AQ solder has been optimized to make a low distortion connection. All solder, including "silver solder," is a poor conductor. The difference you hear between solders is a result of connection quality. AQ Solder does not have a high silver content because the more silver there is in solder, the more difficult it is to make a good connection. A combination of these major ingredients, and many more subtle details add up to explain how even an inexpensive cable like Sidewinder can sound so good.

AUDIOQUEST  Copperhead 0,5m  €. 99,00 Per prezzo scontato TELEFONARE/EMAIL  

AUDIOQUEST  Copperhead 0,75m        €.108,00 Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST  Copperhead 1,0m           €.116,00 Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST   Copperhead 1,5m          €.133,00 Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST   Copperhead 2,0m          €.150,00 Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST  Copperhead  3,0m          €.184,00 Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST  Copperhead  4,5m          €.235,00 Per prezzo scontato TELEFONARE/EMAIL

Per  dimensioni  maggiori telefonare  o leggere pdf

At first glance, Copperhead's design looks like a traditional coaxial cable. However, PSC copper and many other very important differences each contribute to Copperhead having such unprecedented ease and clarity in an affordable cable. DESIGN BASICS:Copperhead has identical conductors for the positive and ground connections. Underneath the 100% coverage foil shield is a bare conductor, exactly the same as the insulated center conductor. The conductor under the shield does double duty as a low distortion audio connection, and as the drain wire connecting the shield to ground. CONDUCTORS: Both of Copperhead's conductors are solid. Electrical and magnetic interaction between strands in a conventional cable is the greatest source of distortion, often causing a somewhat dirty harsh sound. Solid conductors are fundamental toward achieving Copperhead's very clean sound. METAL:PSC (Perfect-Surface Copper) has an astonishingly smooth and pure surface. Proprietary metal processing technology protects the wire's surface at every stage of drawing and fabrication. When high-purity low-oxide copper is kept as soft, pure and smooth as possible, it becomes a wonderfully low distortion conductor. For fifteen years AudioQuest has pioneered the use of superior metals; yet even we were surprised by this huge leap in performance. PSC clearly outperforms previous AQ metals that cost over ten times as much. INSULATION:Any solid material adjacent to a conductor is actuINSULATION:Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation, circuit board materials all absorb energy (loss). Some of this energy is stored and then released as distortion. Copperhead uses air filled FPE (Foamed Polyethylene) insulation on both conductors because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile.  Thanks to all the air in FPE, it causes much less of the out-of-focus effect common to other materials.  TERMINATIONS:Precision gold plated plugs are carefully attached with the very best solder. Through choice of flux and metallurgy, AQ solder has been optimized to make a low distortion connection. All solder, including "silver solder," is a lousy conductor. The difference you hear between solders is a result of connection quality. AQ Solder does not have a high silver content because the more silver there is in solder, the more difficult it is to make a good connection. A combination of these major ingredients, and many more subtle details add up to explain how even an affordable cable like Copperhead can sound so exceptional.

Cavi SEGNALE RCA/RCA OPPURE XLR/XLR

Telefona o invia un  e-mail per avere l'ultimo prezzo   0174 670100   Telefona o invia un  e-mail per avere l'ultimo prezzo 0174 670100  info@sinergy.us

AUDIOQUEST Diamondback 0,5m €.143,00Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST Diamondback  0,75m      €.159,00 Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST Diamondback  1,0m       €.174,00 Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST Diamondback  1,5m       €.206,00  Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST Diamondback  2,0m        €.238,00  Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST Diamondback  2,5m        €.302,00 Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST Diamondback  3,0m        €.397,00  Per prezzo scontato TELEFONARE/EMAIL 

Per  dimensioni  maggiori telefonare  o leggere pdf

DIAMONDBACK: Many sophisticated design techniques, superior materials, and an exceptional termination system combine to make Diamondback possible. The result will put more than a scare into most cost-no-object cables.DESIGN BASICS:Diamondback is Triple-Balanced. This means there are three identical insulated conductors, in addition to a separate conductor underneath the 100% coverage foil shield. When used with XLR connectors and balanced electronics, the two positive signals (inverting and non-inverting) and the negative, all get the same low-distortion conducting path. The shield is attached to chassis ground through the case of the XLR, providing extremely effective shielding without contaminating the quality of the negative conducting path. When Diamondback is fitted with RCA plugs, two conductors are used together for the much higher potential across the negative connection, providing a substantial performance advantage. The shield is only attached at one end, providing total shield coverage without compromising the negative conducting path.CONDUCTORS: All of Diamondback’s conductors are solid. Electrical and magnetic interaction between strands in a conventional cable is the greatest source of distortion, often causing a somewhat dirty harsh sound. Solid conductors are fundamental toward achieving Diamondback’s very clean sound.

AUDIOQUEST King Cobra      0,5m €.206,00Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST King Cobra  0,75m          €.233,00 Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST King Cobra   1,0m          €.259,00  Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST King Cobra   1,5m          €.312,00  Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST  King Cobra  2,0m           €.365,00 Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST King Cobra  2,5m            €.418,00 Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST King Cobra  3,0m           €.471,00  Per prezzo scontato TELEFONARE/EMAIL 

Many sophisticated design techniques, superior materials, and an exceptional connection system combine to make King Cobra possible. Whether used single ended (RCA plugs) or balanced (XLR plugs), King Cobra’s open and natural sound is obvious.
DESIGN BASICS: King Cobra is Triple-Balanced. This means there are three identical insulated conductors, in addition to a separate conductor underneath the 100% coverage foil shield. When used with XLR connectors and balanced electronics, the two positive signals (inverting and non-inverting) and the negative, all get the same low-distortion conducting path. The shield is attached to chassis ground through the case of the XLR, providing extremely effective shielding without contaminating the quality of the negative conducting path. When King Cobra is fitted with RCA plugs, two conductors are used together for the much higher potential across the negative connection, providing a substantial performance advantage. The shield is only attached at one end, providing total shield coverage without compromising the negative conducting path.CONDUCTORS:All of King Cobra’s conductors are solid. Electrical and magnetic interaction between strands in a conventional cable is the greatest source of distortion, often causing a somewhat dirty harsh sound. Solid conductors are fundamental toward achieving King Cobra’s very clean sound.METAL:PSC+ (Perfect-Surface Copper+) has an astonishingly smooth and pure surface. Proprietary metal processing technology protects the wire’s surface at every stage of drawing and fabrication. When high-purity low-oxide copper is kept as soft, pure and smooth as possible, it becomes a wonderfully low distortion PSC conductor. PSC+ is manufactured by applying the same exceptional technology to an ultra pure copper. The resulting sound quality is even more focused and simply less in-the-way. For fifteen years AudioQuest has pioneered the use of superior metals; yet even we were surprised by the huge leap in performance made possible with Perfect-Surface Technology. PSC+ simply outperforms all previously available metals at any price.INSULATION: Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation, circuit board materials all absorb energy (loss). Some of this energy is stored and then released as distortion. All of King Cobra’s conductors use PE Air Tubes insulation because air absorbs next to no energy, and Polyethylene is low-loss and has a benign distortion profile. Thanks to all the PE Air Tubes, it causes much less of the out-of-focus effect common to other materials.NOISE-DISSIPATION SYSTEM: 100% shield coverage is easy. Preventing captured RF interference from modulating the equipment's ground-reference requires AQ's Noise-Dissipation System. Metal and Carbon-Loaded synthetics prevent most RFI from reaching the equipment's ground-plane.COLD-WELD SYSTEM: Novel plug design enables a perfect heat-free connection between cable and plug. XLR plugs are also available.King Cobra’s gold-plated RCA plugs use a patented design that eliminates the distortion caused by the extra contact inside most plugs. Because the ground shells are stamped instead of machined, the metal can be chosen for low distortion instead of for its machinability. A combination of these major ingredients, and many more subtle details add up to explain how King Cobra can sound so wonderfully clean, clear and dynamic.

AUDIOQUEST COLUMBIA     0,5m €.375,00Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST  COLUMBIA 0,75m          €.412,00 Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST COLUMBIA   1,0m          €.450,00  Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST COLUMBIA 1,5m            €.525,00 Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST  COLUMBIA  2,0m           €.600,00 Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST  COLUMBIA 2,5m            €.675,00 Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST  COLUMBIA  3,0m          €.750,00 Per prezzo scontato TELEFONARE/EMAIL 

NOISE-DISSIPATION SYSTEM:  100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment’s ground-reference requires AQ’s Noise-Dissipation System. Metal and Carbon-Loaded synthetics prevent most RFI from reaching the equipment’s ground-plane.SOLID PSC+ COPPER:  Perfect-Surface Technology applied to extreme-purity copper eliminates irritation and provides tremendous clarity.DIELECTRIC-BIAS SYSTEM (DBS, US Pat #7,126,055):  All insulation slows down the signal on the conductor inside.  When insulation is un-biased, it slows down parts of the signal differently, a big problem for very time sensitive multi-octave audio.AudioQuest’s DBS creates a strong stable electrostatic field which saturates and polarizes (organizes) the molecules of the insulation. This minimizes both energy storage in the insulation and the multiple nonlinear time-delays. Sound appears from a surprisingly black background with unexpected detail and dynamic contrast. The DBS pack’s batteries will last for years. A test button and LED allow for the occasional battery check.PE AIR-TUBES:  Air is a nearly perfect dielectric. Once the DBS is attached (for 2 weeks), the normal irritation caused by un-biased Teflon is eliminated. TRIPLE-BALANCED:  Optimized for RCA or XLR COLD-WELD SYSTEM:  Novel plug design enables a perfect heat-free connection between cable and plug. XLR plugs are also available.

AUDIOQUEST COLORADO     0,5m €.675,00  Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST  COLORADO 0,75m         €.763,00  Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST  COLORADO 1,0m          €.850,00  Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST COLORADO   1,5m         €.1.025,00 Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST  COLORADO  2,0m         €.1.200,00 Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST  COLORADO   2,5m        €.1.375,00 Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST  COLORADO  3,0m        €.1.550,00 Per prezzo scontato TELEFONARE/EMAIL 

SOLID PSC+ CONDUCTORS: Solid conductors prevent strand interaction, a major source of cable distortion. Extremely high-purity Perfect-Surface Copper+ (PSC+) minimizes distortion caused by grain boundaries which exist within any metal conductor, nearly eliminating harshness and greatly increasing clarity compared to OFHC, OCC, 8N and other coppers.TEFLON AIR-TUBES: Air is a nearly perfect dielectric. Once DBS is attached (for 2 weeks), the normal irritation caused by un-biased Teflon is eliminated.DIELECTRIC-BIAS SYSTEM (DBS, US Pat #7,126,055): All insulation slows down the signal on the conductor inside. When insulation is un-biased, it slows down parts of the signal differently, a big problem for very time sensitive multi-octave audio.AudioQuests DBS creates a strong stable electrostatic field which saturates and polarizes (organizes) the molecules of the insulation. This minimizes both energy storage in the insulation and the multiple nonlinear time-delays. Sound appears from a surprisingly black background with unexpected detail and dynamic contrast. The DBS packs batteries will last for years. A test button and LED allow for the occasional battery check.NOISE-DISSIPATION SYSTEM: 100% shield coverage is easy. Preventing captured RF Interference from modulating the equipments ground-reference requires AQs Noise-Dissipation System. Metal and Carbon-Loaded synthetics prevent most RFI from reaching the equipments ground-plane.TRIPLE-BALANCED: The 3 conductors in Triple-Balanced Colorado cables insure that whether prepared with RCA or XLR plugs, the positive and negative signals have equally low distortion conducting paths. The 100% coverage shield is never used as an inferior conductor.COLD-WELD SYSTEM: Novel plug design enables a perfec

CAVI PER CASSE NON TERMINATITelefona o invia un  e-mail per avere l'ultimo prezzo   0174 670100   Telefona o invia un  e-mail per avere l'ultimo prezzo 0174 670100  info@sinergy.us

AUDIOQUEST  G2 4,5m         €.39,00      Per offrta  TELEFONARE/EMAIL

AUDIOQUEST  G2 9m               €.65,00      Per offrta  TELEFONARE/EMAIL

AUDIOQUEST  G2 15m             €.125,00      Per offrta  TELEFONARE/EMAIL

AUDIOQUEST  X2 4,5m         €.59,00      Per offrta  TELEFONARE/EMAIL

AUDIOQUEST  X2 9m            €.95,00      Per offrta  TELEFONARE/EMAIL

AUDIOQUEST  X2 15m          €.185,00      Per offrta  TELEFONARE/EMAIL

CAVI PER CASSE TERMINATITelefona o invia un  e-mail per avere l'ultimo prezzo   0174 670100   Telefona o invia un  e-mail per avere l'ultimo prezzo 0174 670100  info@sinergy.us

AUDIOQUEST  TYPE 4   1m    €.154,00      Per offreta  TELEFONARE/EMAIL

AUDIOQUEST  TYPE 4   1,5m     €.169,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  TYPE 4   2m      €.184,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  TYPE 4   2.5m     €.198,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  TYPE 4   3m      €.214,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  TYPE 4   3.5m     €.228,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  TYPE 4   4m      €.243,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  TYPE 44,5m      €.258,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  TYPE 4  5m       €.272,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  TYPE 4                                per misure  piu' lunghe   TELEFONARE/EMAIL

At first glance, Type 4 looks like a normal round cable, but inside is a fully optimized and very sophisticated balance of quality ingredients and refined design.
CONDUCTORS: All four of Type 4s conductors are solid. Electrical and magnetic interaction between strands in a conventional cable is the single greatest source of distortion, often causing a somewhat harsh, dirty and confused sound. Solid conductors are the most important ingredients enabling Type 4s very clear sound. Whether a conductor is solid or stranded, skin-effect is a prime distortion mechanism in speaker cables. Type 4 very simply keeps this effect out of the audio range by using conductor sizes that are below the threshold for audible distortion.LONG-GRAIN COPPER: Type 4s LGC (Long Grain Copper) allows a smoother and clearer sound than cables using regular OFHC (Oxygen-Free High-Conductivity) copper. OFHC is a general metal industry specification regarding loss, without any concern for distortion. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance.All drawn metal exhibits directionality, whether in hardware store wire or in the best AQ cable. We wish we could design away this awkwardness. Since we cant, we pay close attention to optimizing performance by clearly marking the cables and our terminations. Please watch for these markings when installing any audio cables.
GEOMETRY: The relationship between conductors defines a cables most basic electrical values (capacitance and inductance). However, even when those variables are kept in a reasonable balance, the relationship between conductors can be varied in ways that greatly effect the sound. The spiral construction of Type 4 allows for significantly better dynamic contrast and information intelligibility than if the same conductors were run in parallel. The specific 4-cross geometry used in Type 4 maximizes this advantage.INSULATION: In a low level cable the insulating material significantly affects the cables performance. However, in a speaker cable the electrical effect of insulation is almost only heard as a dry irritating sound prior to a cable being fully run-in technically adapting to a charged state. The term break-in does not apply because taking away the charge will slowly return the cable to its new condition. The insulations mechanical (hard vs. soft) properties make an important difference in stranded cables. The harder the better in order to minimize strand movement. Since solid conductors dont need hard insulation, they can take advantage of the vibration damping advantage of a softer insulation.SST (Spread Spectrum Technology): Any single size or shape of conductor has a specific distortion profile. Even though radially symmetrical conductors (solid round or tubular) have the fewest discontinuities, any particular size does have a sonic signature. SST is a method for significantly reducing the awareness of these character flaws by using a precise combination of different size conductors. SST has enabled Type 4 to be the biggest possible four conductor cable that avoids audible skin-effect.TERMINATIONS: AudioQuest offers a wide range of high quality connectors that allow Type 4 to be securely attached to any type of equipment. Quality is in the low distortion sound, not necessarily in the eye-candy effect. AQ ends are either a dull looking gold or silver because these metals are plated directly over the connector. There is no shiny and harsh sounding nickel layer underneath. AQ spade lugs are soft because better metal is soft, and facilitates a higher quality connection. AQ spade lugs are available in several sizes. AQ Benda-Pins fit all equipment, except pieces requiring a banana plug or BFA connector, in which case the AQ Crimp BFA/Banana provides unprecedented performance at a fraction the cost of those not-so-good sounding big eye-candy versions.

AUDIOQUEST  ROCKET 33   1m    €.255,00      Per offreta  TELEFONARE/EMAIL

AUDIOQUEST  ROCKET 33   1,5m     €.295,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  ROCKET 33   2m      €.335,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  ROCKET 33   2.5m     €.375,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  ROCKET 33   3m      €.415,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  ROCKET 33   3.5m     €.455,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  ROCKET 33   4m      €.495,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  ROCKET 334,5m      €.535,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  ROCKET 33  5m       €.575,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  ROCKET 33                               per misure  piu' lunghe   TELEFONARE/EMAIL

This Dual-Triple cable does not look normal on the outside, and it is not at all normal on the inside. Amazingly clean and effortless performance is made possible by a sophisticated combination of extraordinary materials and extremely refined design.Solid Conductors: Eliminate harshness and confusion due to strand interaction.Long-Grain Copper/Perfect-Surface Copper: Rocket 33 uses a carefully finessed combination of Long-Grain Copper (LGC) and extremely high-purity Perfect-Surface Copper (PSC). LGC has fewer oxides within the conducting material, less impurities, less grain boundaries and definitively better performance. The astonishingly smooth and pure PSC further eliminates harshness and greatly increases clarity.Dual-Triple Geometry: The relationship between conductors defines a cables most basic electrical values (capacitance and inductance). However, even when those variables are kept in a reasonable balance, the relationship between conductors can be varied in ways that greatly affect the sound. The Dual-Triple construction of Rocket 33 allows for significantly better dynamic contrast and information intelligibility than if the same conductors were run in parallel.Spread-Spectrum Technology (SST): Any single size or shape of conductor has a specific distortion profile. Even though radially symmetrical conductors (solid or tubular) have the fewest discontinuities, any particular size does have a sonic signature. SST is a methodfor significantly reducing the awareness of these character flaws by using a precise combination of different size conductors. The six different SST-determined conductor sizes used in Rocket 33 allow an exceptionally clear, clean and dynamic sound.Bi-Wiring: Rocket 33 is an exceptional Single-Biwire cable. When the halves are separated at the speaker end, the Dual-Triple design turns Rocket 33 into a true Double-Biwire set thanks to the magnetic autonomy of each tri-conductor section. On its own, one tri-conductor group wou lo the magnetic autonomy of each tri-conductor section. On its own, one tri-conductor group would be a little light-weight in performance as it is biased towards treble finesse. The other tri-conductor group is biased toward the bass; its more forceful and lacking ultimate resolution. Together they form a completely optimized full range design. When separated, the Dual-Triple design lets Rocket 33 be a maximum performance Double-Biwire in a single cable.Terminations: AudioQuest offers a wide range of high quality connectors that allow Rocket 33 to be securely attached to any type of equipment. AQ ends are either dull looking gold r silver because these metals are plated directly over the connector. There is no shiny and harsh sounding nickel layer underneath. AQ PK-spade lugs are soft because better metal is soft, and facilitates a higher quality connection. For pieces requiring a banana plug or BFA connector the AQ PK-BFA/Banana provides unprecedented performance over conventional brass versions.Application: The PVC “pants” on either end of Rocket 33 are marked “Speaker End” or “Amp End”. Please use cables in the direction required.

AUDIOQUEST  TYPE-8   1m    €.255,00      Per offreta  TELEFONARE/EMAIL

AUDIOQUEST TYPE-8   1,5m      €.295,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  TYPE-8    2m       €.335,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  TYPE-8   2.5m      €.375,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  TYPE-8   3m       €.415,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  TYPE-8   3.5m      €.455,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  TYPE-8    4m       €.495,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  TYPE-8 4,5m       €.535,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  TYPE-8   5m       €.575,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  TYPE-8                                       per misure  piu' lunghe   TELEFONARE/EMAIL

Copper (PSC) conductors. All conductors are solid, which prevents strand interaction, a major source of distortion. Surface quality is critical because a conductor can be considered as a rail-guide for both the electric fields within a conductor, and for the magnetic fields outside the conductor. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance. The astonishingly smooth and pure PSC further eliminates harshness and greatly increases clarity compared to OFHC, OCC, 8N and other coppers. CIRCULAR-ARRAY GEOMETRY: The relationship between conductors defines some of a cable’s basic electrical values (capacitance and inductance). Independent of these values, the relationship between conductors can be varied in ways that greatly effect performance. The circular-spiral construction of Type-8 allows for significantly better dynamic contrast and clarity than if the same conductors were run in parallel or as multiple twisted pairs.SPREAD SPECTRUM TECHNOLOGY (SST): Any single size or shape of conductor has a characteristic distortion profile. Even though radially symmetrical conductors (solid rounda characteristic distortion profile. Even though radially symmetrical conductors (solid round or tubular) have the fewest discontinuities, each size still has a sonic signature. Type-8 uses a precise combination of four different size conductors in order to significantly reduce the audibility of these character flaws.TERMINATIONS: Superior AudioQuest connectors allow Type-8 to be securely attached to any type of equipment. AQ ends are dull looking because there is no harsh sounding shiny nickel layer underneath the silver (or gold). AQ PK-spade lugs are soft because pure stamped copper is much better than machined brass. For pieces requiring a banana plug or BFA connector the AQ PK-BFA/Banana provides unprecedented performance over conventional brass versions.BIWIRING: When possible, running separate conductors or separate cables to the treble and bass “halves” of a speaker will considerably reduce distortion. The large magnetic fields associated with bass energy modulate a cable’s electrical properties, thereby modulating/distorting the treble … similar to the way waves in the ocean make it much harder to swim.Type-8 may be used as a Single-BiWire cable by preparing Type-8 with four connections on the speaker end.. For maximum performance though, use two pair of Type-8 or a Double-BiWire set.DIRECTIONS: The “breakouts” on either end of Type-8 are marked “Speaker End” or Amp End.” Please use cables in the direction indicated.

AUDIOQUEST  ROCKET 44   1m    €.255,00      Per offreta  TELEFONARE/EMAIL

AUDIOQUEST ROCKET 44   1,5m      €.295,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  ROCKET 44    2m      €.335,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  ROCKET 44   2.5m     €.375,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  ROCKET 44   3m       €.415,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  ROCKET 44   3.5m      €.455,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  ROCKET 44    4m       €.495,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  ROCKET 44 4,5m       €.535,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  ROCKET 44   5m       €.575,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  ROCKET 44                                     per misure  piu' lunghe   TELEFONARE/EMAIL

This Double-Star Quad cable does not look normal on the outside, and it is not at all normal on the inside. Amazingly clean and effortless performance is made possible by a sophisticated combination of extraordinary materials and extremely refined design.Solid Conductors: Eliminate harshness and confusion due to strand interaction.Perfect-Surface Copper/Long-Grain Copper: Rocket 44 uses a carefully finessed combination of extremely high-purity Perfect-Surface Copper (PSC) along with Long-Grain Copper (LGC). LGC has fewer oxides within the conducting material, less impurities, less grain boundaries and definitively better performance. The astonishingly smooth and pure PSC further eliminates harshness and greatly increases clarity. Rocket 44’s conductor mix is dominated by Perfect-Surface Copper (PSC).Double-Star Quad Geometry: The relationship between conductors defines a cables most basic electrical values (capacitance and inductance). However, even when those variables are kept in a reasonable balance, the relationship between conductors can be varied in ways that greatly affect the sound. The Double-Star Quad construction of Rocket 44 allows for significantly better dynamic contrast and information intelligibility than if the same conductors were run in parallel.Spread-Spectrum Technology (SST): Any single size or shape of conductor has a specific distortion profile. Even though radially symmetrical conductors (solid or tubular) have the fewest discontinuities, any particular size does have a sonic signature. SST is a method for significantly reducing the awareness of these character flaws by using a precise combination of different size conductors. The four different SST-determined conductor sizes used in Rocket 44 allow an exceptionally clear, clean and dynamic sound.Bi-Wiring: Rocket 44 is an exceptional Single-Biwire cable. When the halves are separated at the speaker end, the Double-Star Quad design turns Rocket 44 into a true Double-Biwire set thanks to the magnetic autonomy of each Star-Quad section. On its own, each Star Quad group would be a little light-weight in performance as it is biased towards treble finesse. The other Star Quad group is biased toward the bass; it’s more forceful and lacking ultimate resolution. Together they form a completely optimized full range design. When separated, the Double-Star Quad design lets Rocket 44 be a maximum performance Double-Biwire in a single cable.Terminations: AudioQuest offers a wide range of high quality connectors that allow Rocket 44 to be securely attached to any type of equipment. AQ ends are either dull looking gold or silver because these metals are plated directly over the connector. There is no shiny and harsh sounding nickel layer underneath. AQ PK-spade lugs are soft because better metal is soft, and facilitates a higher quality connection. For pieces requiring a banana plug or BFA connector the AQ PK-BFA/Banana provides unprecedented performance over conventional brass versions.Application:  The PVC “pants” on either end of Rocket 44 are marked “Speaker End” or “Amp End”. Please use cables in the direction required.

AUDIOQUEST  CV-4   1m      €.380,00      Per offreta  TELEFONARE/EMAIL

AUDIOQUEST  CV-4   1,5m       €.420,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  CV-4   2m        €.460,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  CV-4  2.5m       €.500,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  CV-4  3m        €.540,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  CV-4  3.5m       €.580,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  CV-4   4m        €.620,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  CV-44,5m        €.660,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  CV-4  5m         €.700,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  CV-4                                      per misure  piu' lunghe   TELEFONARE/EMAIL

CV-4 might look like a normal round cable, but inside is a fully optimized combination of extraordinary materials and extremely refined design.CONDUCTORS: All four of CV-4’s conductors are solid. Electrical and magnetic interaction between strands in a conventional cable is the single greatest source of distortion, often causing a somewhat harsh, dirty and confused sound. Solid conductors are the most important ingredients enabling CV-4’s very clear sound. Whether a conductor is solid or stranded, skin-effect is a prime distortion mechanism in speaker cables. CV-4 very simply keeps this effect out of the audio range by using conductor sizes that are below the threshold for audible distortion.PERFECT-SURFACE COPPER+: CV-4 uses extremely high purity Perfect-Surface Copper+ (PSC+) conductors. All conductors are solid, which prevents strand interaction, a major source of distortion. Surface quality is critical because a conductor can be considered as a rail-guide for both the electric fields within a conductor, and for the magnetic fields outside the conductor. The astonishingly smooth and pure Perfect-Surface eliminates harshness and greatly increases clarity compared to OFHC, OCC, 8N and other coppers. The superior purity of PSC+ further minimizes distortion caused by grain boundaries, which exist within any metal conductor.DIELECTRIC-BIAS SYSTEM (patent pending): Unfortunately, because insulation stores and releases energy, it is also a “dielectric.” In a cable application, all released energy is distortion. The misnomer “break-in” is often used to describe the pronounced improvement in performance as the dielectric adapts to a charged state as the cable is used. Whenever a cable does not have a charge on it, it is re-adapting to an uncharged state; it is becoming new again.By maintaining a 36 volt dielectric-bias, far above the voltage of delicate audio signals, the DBS system provides considerably better transparency and dynamics than is possible even from a cable in continuous use. It takes a couple of weeks for the DBS system to reach maximum performance. Since DBS battery packs are attached when CV-4 cables are first terminated, CV-4 will be approaching or at peak performance by the time it is installed in your system. Since there is no “load” on the two standard hardware-store batteries, they will last for years. A test button and LED allow for occasional verification of battery performance.GEOMETRY: The relationship between conductors defines a cable’s most basic electrical values (capacitance and inductance). However, even when those variables are kept in a reasonable balance, the relationship between conductors can be varied in ways that greatly effect the sound. The spiral construction of CV-4 allows for significantly better dynamic contrast and information intelligibility than if the same conductors were run in parallel. The specific 4-cross geometry used in CV-4 maximizes this advantage.SST (Spread Spectrum Technology): Any single size or shape of conductor has a specific distortion profile. Even though radially symmetrical conductors (solid round or tubular) have the fewest discontinuities, any particular size does have a sonic signature. SST is a method for significantly reducing the awareness of these character flaws by using a precise combination of different size conductors. The four different SST-determined conductor sizes used in CV-4 allow an exceptionally clear, clean and dynamic sound.TERMINATIONS: AudioQuest offers a wide range of high quality connectors that allow CV-4 to be securely attached to any type of equipment. “Quality” is in the low distortion sound, not necessarily in the eye-candy effect. AQ ends are either a dull looking gold or silver because these metals are plated directly over the connector. There is no shiny and harsh sounding nickel layer underneath. AQ spade lugs are soft because better metal is soft, and facilitates a higher quality connection. AQ spade lugs are available in several sizes. AQ Benda-Pins fit all equipment, except pieces requiring a banana plug or BFA connector, in which case the AQ Crimp BFA/Banana provides unprecedented performance at a fraction the cost of thoCrimp BFA/Banana provides unprecedented performance at a fraction the cost of those not-so-good sounding big eye-candy versions.

AUDIOQUEST  ROCKET 88   1m    €.455,00   Per offreta  TELEFONARE/EMAIL

AUDIOQUEST ROCKET 88  1,5m      €.515,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  ROCKET 88   2m      €.575,00     Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  ROCKET 88  2.5m     €.635,00     Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  ROCKET 88   3m      €.695,00     Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  ROCKET 88   3.5m     €.755,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  ROCKET 88   4m      €.815,00    Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  ROCKET 88 4,5m      €.875,00    Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  ROCKET 88   5m      €.935,00     Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  ROCKET 88                                    per misure  piu' lunghe   TELEFONARE/EMAIL

This Double-Star Quad cable does not look normal on the outside, and it is not at all normal on the inside. Amazingly clean and effortless performance is made possible by a sophisticated combination of extraordinary materials and extremely refined design.Conductors: All eight of Rocket 88’s conductors are solid. Solid conductors prevent strand interaction, a major source of cable distortion. Electrical and magnetic interaction between strands in a conventional cable is the single greatest source of distortion, often causing a somewhat harsh, dirty and confused sound. Solid conductors are the most important ingredients enabling Rocket 88’s very clear sound. Whether a conductor is solid or stranded, skin effect is a prime distortion mechanism in speaker cables. Rocket 88 very simply keeps this effect out of the audio range by using conductor sizes that are below the threshold for audible distortion.Metal: Extreme high-purity Perfect-Surface Copper+ (PSC+) minimizes distortion caused by grain boundaries that exist within any metal conductor, eliminating harshness and greatly increasing clarity compared to all other conducting materials. PSS has an astonishingly smooth and pure surface. Proprietary metal processing technology protects the wire’s surface at every stage of drawing and fabrication. When high-purity low-oxide copper is kept as soft, pure and smooth as possible, it becomes the wonderfully low distortion PSC conductor used in many AudioQuest models. PSC+’s extreme transparency is made possible by applying Perfect Surface Technology to ultra pure solid copper. PSC+ is the ultimate example of how far this remarkable technology can take us.SST (Spread Spectrum Technology): Any single size or shape of conductor has a specific distortion profile. Even though radially symmetrical conductors (solid round or tubular) have the fewest discontinuities, any particular size does have a sonic signature. SST is a method for significantly reducing the awareness of these character flaws by using a precise combination of different size conductors. The four different SST-determined conductor sizes used in Rocket 88 allow an exceptionally clear, clean and dynamic sound.Dielectric Bias System (DBS) (US patent 7,126,055): Greatly improved performance is made possible by a constant 48 volt charge on all Rocket 88’s insulation. Similar to how the earth’s magnetic field makes all compasses point north, the AQ DBS system creates an electrostatic field which causes the molecules of the insulation to all point in the same direction. This minimizes the multiple nonlinear time-delays. Sound appears from a surprisingly black background with unexpected detail and dynamic contrast. Because DBS battery packs are attached when Rocket 88 cables are assembled, Rocket 88 does not require any additional run-in period. Because there is no “load” on the easily replaceable batteries, they will last for years. A test button and LED allow for occasional verification of battery performance.Double Star-Quad Geometry: The relationship between conductors defines a cable’s most basic electrical values (capacitance and inductance). However, even when those variables are kept in a reasonable balance, the relationship between conductors can be varied in ways that greatly affect the sound. The Double Star-Quad construction of Rocket 88 allows for significantly better dynamic contrast and information intelligibility than if the same conductors were run in parallel. The specific 4-cross geometry used in each half of Rocket 88 maximizes this advantage. In addition, Rocket 88 is an exceptional Single-BiWire cable. When the halves are separated at the speaker end, the Double Star-Quad design turns Rocket 88 into a true Double-BiWire set thanks to the magnetic autonomy of each star-quad.  When separated the Dual Star-Quads let Rocket 88 be a maximum performance Double-BiWire in a single cable.Cold-Weld Terminations: Superior AudioQuest connectors allow Rocket 88 to be securely attached to any type of equipment. AQ ends are dull looking because there is no harsh sounding shiny nickel layer underneath the silver (or gold). The connection between the plug and conductors is made using AQ's Cold-Weld system which provides a superior connection that ensures that the structural integrity of the conductor is kept completely intact.  The Cold-Weld system refers to a combination of high pressure at the point of contact and the use of copper or silver impregnated paste. (Rocket 88’s silver conductors get silver paste.) A controlled amount of pressure is used to essentially make the conductor and connector mechanically "as one" without the use of heat. The silver bearing paste acts as both a silver sulfide retardant, and as well as a very effective contact enhancer. AQ's Cold-Weld system ensures a practically perfect connection

AUDIOQUEST  CV-8   1m   €.560,00      Per offreta  TELEFONARE/EMAIL

AUDIOQUEST  CV-8   1,5m      €.640,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  CV-8   2m       €.720,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  CV-8  2.5m      €.800,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  CV-8  3m       €.880,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  CV-8  3.5m      €.960,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  CV-8   4m      €.1.040,00    Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  CV-84,5m      €.1.120,00    Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  CV-8  5m     €.1.200,00     Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  CV-8                                    per misure  piu' lunghe   TELEFONARE/EMAIL

PERFECT-SURFACE COPPER+ (PSC+): CV-8 uses a carefully finessed combination of Perfect-Surface Copper (PSC) and extremely high purity Perfect-Surface Copper+ (PSC+) conductors. All conductors are solid, which prevents strand interaction, a major source of distortion. Surface quality is critical because a conductor can be considered as a rail-guide for both the electric fields within a conductor, and for the magnetic fields outside the conductor. The astonishingly smooth and pure Perfect-Surface eliminates harshness and greatly increases clarity compared to OFHC, OCC, 8N and other coppers. Extremely high-purity PSC+ further minimizes distortion caused by grain boundaries, which exist within any metal conductor.DIELECTRIC-BIAS SYSTEM (DBS, PATENT PENDING): In addition to insulating and isolating, insulation is also a “dielectric.” It has permittivity and permeability; it stores and releases energy. Unfortunately, dielectrics are non-linear with frequency and with wave amplitude, causing nasty non-linear phase shifts proportional to frequency and/or signal amplitude.Fortunately, by electrostatically aligning/polarizing the molecules within a cable's dielectric, the non-linear corruption can be dramatically reduced. The reason your equipment and your cables and polarizing the dielectric material present throughout every component. However, even playing music loud all the time will never fully “form” the dielectric. In contrast, CV-8’s DBS puts a continuous 36 volt potential (DC bias) between the very center of CV-8, and an outer shield-like layer. All the dielectric in-between is fully aligned all the time. There is no interaction with the signal conductors. Nothing is put in the signal path. A test button and LED allow for occasional verification of battery performance.CIRCULAR-ARRAY GEOMETRY: The relationship between conductors defines some of a cable’s basic electrical values (capacitance and inductance). Independent of these values, the relationship between conductors can be varied in ways that greatly effect performance. The circular-spiral construction of CV­8 allows for significantly better dynamic contrast and clarity than if the same conductors were run in parallel or as multiple twisted pairs.
SPREAD SPECTRUM TECHNOLOGY (SST): Any single size or shape of conductor has a characteristic distortion profile. Even though radially symmetrical conductors (solid rounda characteristic distortion profile. Even though radially symmetrical conductors (solid round or tubular) have the fewest discontinuities, each size still has a sonic signature. CV-8 uses a precise combination of four different size conductors in order to significantly reduce the audibility of these character flaws.
TERMINATIONS: Superior AudioQuest connectors allow CV-8 to be securely attached to any type of equipment. AQ ends are dull looking because there is no harsh sounding shiny nickel layer underneath the silver (or gold). AQ PK-spade lugs are soft because pure stamped copper is much better than machined brass. For pieces requiring a banana plug or BFA connector the AQ PK-BFA/Banana provides unprecedented performance over conventional brass versions.BIWIRING: When possible, running separate conductors or separate cables to the treble and bass “halves” of a speaker will considerably reduce distortion. The large magnetic fields associated with bass energy modulate a cable’s electrical properties, thereby modulating/distorting the treble … similar to the way waves in the ocean make it much harder to swim.CV-8 may be used as a Single-BiWire cable by preparing CV-8 with four connections on the speaker end.. For maximum performance though, use two pair of CV-8 or a Double-BiWire set.DIRECTIONS: The “breakouts” on either end of CV-8 are marked “Speaker End” or Amp End.” Please use cables in the direction indicated.

AUDIOQUEST  ROCKFELLER   1m €. 610,00     Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  ROCKFELLER  1,5m    €. 690,00     Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  ROCKFELLER   2m     €. 770,00    Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  ROCKFELLER  2.5m    €. 850,00     Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  ROCKFELLER  3m     €. 930,00     Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  ROCKFELLER  3.5m    €.1.010,00  Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  ROCKFELLER   4m      €.1.090,00  Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  ROCKFELLER4,5m     €.1.170,00  Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  ROCKFELLER  5m    €.1.250,00   Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  ROCKFELLER                                 per misure  piu' lunghe   TELEFONARE/EMAIL

his double star quad geometry Flat Rock cable does not look normal on the outside, and it is not at all normal on the inside. A sophisticated combination of extraordinary materials and extremely refined design lets Rockefeller to equally honor all types of music.CONDUCTORS: All eight of Rockefellers conductors are solid. Electrical and magnetic interaction between strands in a conventional cable is the single greatest source of distortion, often causing a somewhat harsh, dirty and confused sound. Solid conductors are the most important ingredients enabling Rockefellers very clear sound. Whether a conductor is solid or stranded, skin-effect is a prime distortion mechanism in speaker cables. Rockefeller very simply keeps this effect out of the audio range by using conductor sizes that are below the threshold for audible distortion.PERFECT-SURFACE COPPER+: Rockefeller uses a carefully finessed combination of Perfect-Surface Copper (PSC) and extremely high purity Perfect-Surface Copper+ (PSC+) conductors. All conductors are solid, which prevents strand interaction, a major source of distortion. Surface quality is critical because a conductor can be considered as a rail-guide for both the electric fields within a conductor, and for the magnetic fields outside the conductor.
The astonishingly smooth and pure Perfect-Surface eliminates harshness and greatly increases clarity compared to OFHC, OCC, 8N and other coppers. Extremely high-purity PSC+ further minimizes distortion caused by grain boundaries, which exist within any metal conductor.DIELECTRIC-BIAS SYSTEM (patent pending): Unfortunately, because insulation stores and releases energy, it is also a dielectric. In a cable application, all released energy is distortion. The misnomer break-in is often used to describe the pronounced improvement in performance as the dielectric adapts to a charged state as the cable is used. Whenever a cable does not have a charge on it, it is re-adapting to an uncharged state; it is becoming new again.By maintaining a 36 volt dielectric-bias, far above the voltage of delicate audio signals, the DBS system provides considerably better transparency and dynamics than is possible even from a cable in continuous use. It takes a couple of weeks for the DBS system to reach maximum performance. Since DBS battery packs are attached when Rockefeller cables are first terminated, Rockefeller will be approaching or at peak performance by the time it is installed in your system. Since there is no load on the two standard hardware-store batteries, they will last for years. A test button and LED allow for occasional verification of battery performance.GEOMETRY: The relationship between conductors defines a cables most basic electrical values (capacitance and inductance). However, even when those variables are kept in a reasonable balance, the relationship between conductors can be varied in ways that greatly effect the sound. The dual spiral construction of Rockefeller allows for significantly better dynamic contrast and information intelligibility than if the same conductors were run in parallel. The specific 4-cross geometry used in each half of Rockefeller maximizes this advantage.SST (Spread Spectrum Technology): Any single size or shape of conductor has a specific distortion profile. Even though radially symmetrical conductors (solid round or tubular) have the fewest discontinuities, any particular size does have a sonic signature. SST is a method for significantly reducing the awareness of these character flaws by using a precise combination of different size conductors. The four different SST-determined conductor sizes used in Bedrock allow an exceptionally clear, clean and dynamic sound.CONDUCTIVE INSULATION: The four negative conductors in Rockefeller are insulated with partially conductive carbon-loaded polyethylene. This remarkable material damps radio-frequency garbage from being fed back into the amplifier. The sonic benefit is exactly the same reduction in hash and better dimensionality that comes whenever RF garbage is reduced in an audio circuit.

AUDIOQUEST  GIBRALTAR   1m  €.770,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  GIBRALTAR  1,5m     €.930,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  GIBRALTAR   2m      €.1.090,00  Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  GIBRALTAR  2.5m    €.1.250,00  Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  GIBRALTAR  3m     €.1.410,00   Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  GIBRALTAR  3.5m    €.1.570,00  Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  GIBRALTAR   4m      €.1.730,00  Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  GIBRALTAR4,5m      €.1.890,00  Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  GIBRALTAR  5m      €.2.050,00  Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  GIBRALTAR                               per misure  piu' lunghe   TELEFONARE/EMAIL

This double star quad geometry “Flat Rock” cable does not look normal on the outside, and it is not at all normal on the inside. A sophisticated combination of extraordinary materials and extremely refined design lets Gibraltar… to equally honor all types of music.CONDUCTORS: All eight of Gibraltar’s conductors are solid. Electrical and magnetic interaction between strands in a conventional cable is the single greatest source of distortion, often causing a somewhat harsh, dirty and confused sound. Solid conductors are the most important ingredients enabling Gibraltar’s very clear sound. Whether a conductor is solid or stranded, skin-effect is a prime distortion mechanism in speaker cables.Gibraltar very simply keeps this effect out of the audio range by using conductor sizes that are below the threshold for audible distortion.PERFECT-SURFACE COPPER+: Gibraltar uses extremely high purity Perfect-Surface Copper+ (PSC+) conductors. All conductors are solid, which prevents strand interaction, a major source of distortion. Surface quality is critical because a conductor can be considered as a rail-guide for both the electric fields within a conductor, and for the magnetic fields outside the conductor. The astonishingly smooth and pure Perfect-Surface eliminates harshness and greatly increases clarity compared to OFHC, OCC, 8N and other coppers. The superior purity of PSC+ further minimizes distortion caused by grain boundaries, which exist within any metal conductor.DIELECTRIC-BIAS SYSTEM (patent pending): Unfortunately, because insulation stores and releases energy, it is also a “dielectric.” In a cable application, all released energy is distortion. The misnomer “break-in” is often used to describe the pronounced improvement in performance as the dielectric adapts to a charged state as the cable is used. Whenever a cable does not have a charge on it, it is re-adapting to an uncharged state; it is becoming new again.By maintaining a 36 volt dielectric-bias, far above the voltage of delicate audio signals, the DBS system provides considerably better transparency and dynamics than is possible even from a cable in continuous use. It takes a couple of weeks for the DBS system to reach maximum performance. Since DBS battery packs are attached when Gibraltar cables are first terminated, Gibraltar will be approaching or at peak performance by the time it is installed in your system. Since there is no “load” on the two standard hardware-store batteries, they will last for years. A test button and LED allow for occasional verification of battery performance.
GEOMETRY: The relationship between conductors defines a cable’s most basic electrical values (capacitance and inductance). However, even when those variables are kept in a reasonable balance, the relationship between conductors can be varied in ways that reasonable balance, the relationship between conductors can be varied in ways that greatly effect the sound. The dual spiral construction of Gibraltar allows for significantly better dynamic contrast and information intelligibility than if the same conductors were run in parallel. The specific 4-cross geometry used in each half of Gibraltar maximizes this advantage.SST (Spread Spectrum Technology): Any single size or shape of conductor has a specific distortion profile. Even though radially symmetrical conductors (solid round or tubular) have the fewest discontinuities, any particular size does have a sonic signature. SST is a method for significantly reducing the awareness of these character flaws by using a precise combination of different size conductors. The four different SST-determined conductor sizes used in Gibraltar allow an exceptionally clear, clean and dynamic sound.CONDUCTIVE INSULATION: The four negative conductors in Gibraltar are insulated with partially conductive carbon-loaded polyethylene. This remarkable material damps radio-frequency garbage from being fed back into the amplifier. The sonic benefit is exactly the same reduction in hash and better dimensionality that comes whenever RF garbage is reduced in an audio circuit.BIWIRING: Gibraltar is an exceptional Single-Biwire cable. When the halves are separated at the speaker end, the double quad-helix design turns Gibraltar into a true double-biwire set thanks to the magnetic autonomy of each quad-helix. On it’s own; one quad would be a little light-weight in performance as it is biased towards treble finesse. The other quad is biased toward the bass; it’s more forceful and lacking ultimate resolution. Together they form a completely optimized full range design, which was the first priority; but when separated the dual star quads let Gibraltar be a maximum performance double-biwire in a single cable.TERMINATIONS: AudioQuest offers a wide range of high quality connectors that allow Gibraltar to be securely attached to any type of equipment. “Quality” is in the low distortion sound, not necessarily in the eye-candy effect. AQ ends are either a dull looking gold or silver because these metals are plated directly over the connector. There is no shiny and harsh sounding nickel layer underneath. AQ PK-spade lugs are soft because better metal is soft, and facilitates a higher quality connection. For pieces requiring a banana plug or BFA connector the AQ PK-BFA/Banana provides unprecedented performance over conventional brass versions.

AUDIOQUEST  KE-4   1m  €.1.380,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST KE-4  1,5m      €.1.870,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  KE-4   2m      €.2.360,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  KE-4  2.5m     €.2.850,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  KE-4  3m      €.3.340,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  KE-4  3.5m     €.3.830,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  KE-4   4m      €.4.320,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  KE-44,5m      €.4.810,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  KE-4  5m       €.5.300,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  KE-4                                      per misure  piu' lunghe   TELEFONARE/EMAIL

KE-4’s conductors are solid. Electrical and magnetic interaction between strands in a conventional cable is the single greatest source of distortion, often causing a somewhat harsh, dirty and confused sound. Solid conductors are the most important ingredients enabling KE-4’s very clear sound. Whether a conductor is solid or stranded, skin-effect is a prime distortion mechanism in speaker cables. KE-4 very simply keeps this effect out of the audio range by using conductor sizes that are below the threshold for audible distortion.DIELECTRIC-BIAS SYSTEM (patent pending): Unfortunately, because insulation stores and releases energy, it is also a “dielectric.” In a cable application, all released energy is distortion. The misnomer “break-in” is often used to describe the pronounced improvement in performance as the dielectric adapts to a charged state as the cable is used. Whenever a cable does not have a charge on it, it is re-adapting to an uncharged state; it is becoming new again.By maintaining a 72 volt dielectric-bias, far above the voltage of delicate audio signals, the DBS system provides considerably better transparency and dynamics than is possible even from a cable in continuous use. It takes a couple of weeks for the DBS system to reach maximum performance. Since DBS battery packs are attached when KE-4 cables are first terminated, KE-4 will be approaching or at peak performance by the time it is installed in your system. Since there is no “load” on the two standard hardware-store batteries, they will last for years. A test button and LED allow for occasional verification of battery performance.PERFECT-SURFACE SILVER: KE-4’s PSS (Perfect Surface Silver) has an astonishingly smooth and pure surface. Proprietary metal processing technology protects the wire’s surface at every stage of drawing and fabrication. When high-purity low-oxide copper is kept as soft, pure and smooth as possible, it becomes the wonderfully low distortion PSC conductor used in many AudioQuest models. Beginning the same process with ultra pure copper makes possible PSC+ copper’s even more focused and free-flowing sound. PSS’s extreme transparency is made possible by applying Perfect Surface Technology to ultra pure solid silver. For fifteen years AudioQuest has pioneered the use of superior metals; yet even we were surprised by the huge leap in performance made possible with Perfect Surface Technology. PSC and PSC+ simply outperform all previously available metals at any price. PSS is the ultimate example of how far this remarkable technology can take us.All drawn metal exhibits directionality, whether in hardware store wire or in the best AQ cable. We wish we could design away this awkwardness. Since we can’t, we pay close attention to optimizing performance by clearly marking the cables and our terminations. Please watch for these markings when installing any audio cables.SST (Spread Spectrum Technology): Any single size or shape of conductor has a specific distortion profile. Even though radially symmetrical conductors (solid round or tubular) have the fewest discontinuities, any particular size does have a sonic signature. SST is a method for significantly reducing the awareness of these character flaws by using a precise combination of different size conductors. SST has enabled KE-4 to be the biggest possible four conductor cable that avoids audible skin-effect.TERMINATIONS: AudioQuest offers a wide range of high quality connectors that allow KE-4 to be securely attached to any type of equipment. “Quality” is in the low distortion sound, not necessarily in the eye-candy effect. AQ ends are either a dull looking gold or silver because these metals are plated directly over the connector. There is no shiny and harsh sounding nickel layer underneath. AQ spade lugs are soft because better metal is soft, and facilitates a higher quality connection. AQ spade lugs are available in several sizes. AQ Benda-Pins fit all equipment, except pieces requiring a banana plug or BFA connector, in which case the AQ Crimp BFA/Banana provides unprecedented performance at a fraction the cost of those not-so-good sounding big eye-candy versions.A combination of these major ingredients, and many more subtle details add up to explain how KE-4 can sounds so good.

AUDIOQUEST  K2                                                           Per offerta  TELEFONARE/EMAIL

PSS has an astonishingly smooth and pure surface, which, when kept as soft, pure and smooth as possible, becomes the wonderfully low distortion PSC conductor used in many AudioQuest models. PSSs extreme transparency is made possible by applying Perfect Surface Technology to ultra pure solid silver.
SST (Spread Spectrum Technology): Any single size or shape of conductor has a specific distortion profile. SST is a method for significantly reducing the awareness of these character flaws by using a precise combination of different size conductors. The four different SST-determined conductor sizes used in K2 allow an exceptionally clear, clean and dynamic sound.Dielectric Bias System (DBS) (US patent 7,126,055): Greatly improved performance is made possible by a constant 72 volt charge on all K2s insulation. Similar to how the earths magnetic field makes all compasses point north, the AQ DBS system creates an electrostatic field which causes the molecules of the insulation to all point in the same direction, minimizing multiple nonlinear time-delays. Sound appears from a surprisingly black background with unexpected detail and dynamic contrast. Because DBS battery packs are attached when K2 cables are assembled, K2 does not require any additional run-in period. Because there is no load on the easily replaceable batteries, they will last for years. A test button and LED allow for occasional verification of battery performance.

CONNETTORI

AUDIOQUEST  PK-BFA BANANA        €.30,00      Per offerta  TELEFONARE/EMAIL

AUDIOQUEST CF-BFA BANANA       €.30,00       Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  PK-BFA FORCELLE     €.50,00        Per offerta  TELEFONARE/EMAIL

AUDIOQUEST  KE-4  5m       €.30,00        Per offerta  TELEFONARE/EMAIL

AUDIOQUEST               €.30,00        Per offerta  TELEFONARE/EMAIL

AUDIOQUEST                  €.30,00       Per offerta  TELEFONARE/EMAIL

CAVI HDMI

Telefona o invia un  e-mail per avere l'ultimo prezzo   0174 670100   Telefona o invia un  e-mail per avere l'ultimo prezzo 0174 670100  info@sinergy.us

*Pdf caratteristiche e  listino prezzi

AUDIOQUEST FOREST 0.6m    €. 32,00      Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST FOREST  1 m     €. 35,00      Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST FOREST  1.5 m  €. 40,00      Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST FOREST  2 m    €. 45,00      Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST FOREST  3 m     €. 55,00      Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST FOREST  5 m     €. 89,00      Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST FOREST  8 m     €.139,00     Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST FOREST  12 m     €.195,00     Per prezzo scontato TELEFONARE/EMAIL

*Pdf caratteristiche e  listino prezzi-

AUDIOQUEST CINNAMON 0.6m €. 59,00      Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST CINNAMON 1 m   €. 65,00      Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST CINNAMON 1.5 m €. 73,00      Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST CINNAMON 2 m   €. 79,00      Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST CINNAMON 3 m   €. 95,00      Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST CINNAMON 5 m   €.129,00      Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST CINNAMON 8 m   €.195,00      Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST CINNAMON 12 m €.279,00      Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST CINNAMON 16 m €.359,00      Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST CINNAMON 20 m €.449,00      Per prezzo scontato TELEFONARE/EMAIL

  *Pdf caratteristiche e  listino prezzi-

AUDIOQUEST CHOCOLATE 0.6m €. 85,00  Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST CHOCOLATE 1 m   €. 95,00  Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST CHOCOLATE 1.5 m €.115,00 Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST CHOCOLATE 2 m   €.129,00 Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST CHOCOLATE 3 m   €.159,00 Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST CHOCOLATE5 m   €.229,00  Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST CHOCOLATE 8 m   €.339,00 Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST CHOCOLATE 12 m €.479,00  Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST CHOCOLATE 16 m €.629,00  Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST CHOCOLATE 20 m €.779,00  Per prezzo scontato TELEFONARE/EMAIL

*Pdf caratteristiche e  listino prezzi-SOPRA I 3 METRI AWG24 COLORE  BIANCO

AUDIOQUEST CARBON 0.6m €.135,00  Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST CARBON 1 m   €.159,00  Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST CARBON 1.5 m €.179,00 Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST CARBON 2 m   €.195,00 Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST CARBON3 m   €.245,00  Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST CARBON5 m   €.359,00  Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST CARBON 8 m   €.525,00 Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST CARBON 12 m €.725,00  Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST CARBON 16 m €.925,00  Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST CARBON 20 m €.1.125,00 Per prezzo scontato TELEFONARE/EMAIL

*Pdf caratteristiche e  listino prezzi-

AUDIOQUEST VODKA 0.6m    €.219,00      Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST VODKA  1 m     €.250,00      Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST VODKA 1.5 m  €.290,00       Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST VODKA 2 m    €.325,00       Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST VODKA 3 m     €.400,00      Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST VODKA  5 m     €.595,00      Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST VODKA  8 m     €.850,00      Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST VODKA  12 m    €.1.150,00    Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST COFFEE 0.6m    €.375,00      Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST COFFEE  1 m     €.425,00      Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST COFFEE 1.5 m   €.490,00       Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST COFFEE 2 m      €.550,00      Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST COFFEE 3 m       €.695,00     Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST COFFEE  5 m     €.995,00     Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST COFFEE  8 m     €.1.395,00   Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST COFFEE  12 m    €.1.975,00   Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST DIAMOND 0.6m  €.  735,00      Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST DIAMOND 1 m    €.  895,00      Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST DIAMOND1.5 m   €.1.095,00    Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST DIAMOND 2 m    €.1.295,00    Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST DIAMOND 3 m      €.1.695,00    Per prezzo scontato TELEFONARE/EMAIL

AUDIOQUEST DIAMOND  5 m     €.2.495,00    Per prezzo scontato TELEFONARE/EMAIL

CAVI VIDEO  COMPONENT

Telefona o invia un  e-mail per avere l'ultimo prezzo   0174 670100   Telefona o invia un  e-mail per avere l'ultimo prezzo 0174 670100  info@sinergy.us

*Pdf caratteristiche e  listino prezzi

AUDIOQUEST YIQ-A       Per misure e  prezzi  scontati  TELEFONARE/EMAIL

THE DEFINITION Of YIQ: AudioQuest YIQ component video cables include three identical maximum performance coaxial cables, one for each of the three component signals; the “Y” (b&w) signal and the “I” and “Q” signals (also known as Pb and Pr), which contain all the color information. In the two channel Svideo system (also known as Y/C), the “I” and “Q” component signals are combined to create a single “C” signal. When available, a three channel component signal is better because it avoids the degradation caused by the process of combining and separating.THE INGREDIENTS: YIQ-A uses a solid Silver-Plated center conductor insulated with Hard Cell Foam(HCF). Silver-plating greatly improves high frequency performance for a fraction of the cost of solid silver.Nitrogen Injected HCF reduces distortion caused by the insulating material, and helps maintain a stable75Ω. The combination foil and braid shield provides 100% protection coverage. Gold-Plated RCAconnectors are professionally attached with superior AudioQuest solder. YIQ-AVIDEO CABLE: COMPONENT VIDEO100% Coverage Shield Hard Cell FoamAQ Solder,Gold-Plated1.25% SilverCenter Conductor26 AWG Solid Silver-Plated Long-Grain Copper(SP-LGC) ConductorsNitrogen Injected Foam PE InsulationFoil / Mylar / Foil Shield Tinned Copper Braided Shield Dark Grey PVC with Black Striped Jacket

*Pdf caratteristiche e  listino prezzi

AUDIOQUEST YIQ-G        Per misure e  prezzi  scontati  TELEFONARE/EMAIL

THE DEFINITION OF YIQ: CinemaQuest YIQ component video cables include three identical maximum performance coaxial cables, one for each of the three component signals; the “Y” (b&w) signal and the “I” and “Q” signals (also known as Pb and Pr), which contain all the color information. In the two channel S-video system (also known as Y/C), the “I” and “Q” component signals are combined to create a single “C” signal. When available, a three channel component signal is better because it avoids the degradation caused by the process of combining and separating.THE INGREDIENTS: YIQ-G uses a solid Silver-Plated center conductor insulated with Hard Cell Foam (HCF). Silver-plating greatly improves high frequency performance for a fraction of the cost of solid silver. Nitrogen Injected HCF reduces distortion caused by the insulating material, and helps maintain a stable 75ý. The combination foil and braid shield provides 100% protection coverage. Gold-Plated RCA connectors are professionally attached with superior AudioQuest solder.
 

*Pdf caratteristiche e  listino prezzi

AUDIOQUEST YIQ-X  Per misure e  prezzi  scontati  TELEFONARE/EMAIL

THE DEFINITION OF YIQ: CinemaQuest YIQ component video cables include three identical maximum performance coaxial cables, one for each of the three component signals; the “Y” (b&w) signal and the “I” and “Q” signals (also known as Pb and Pr), which contain all the color information. In the two channel S-video system (also known as Y/C), the “I” and “Q” component signals are combined to create a single “C” signal. When available, a three channel component signal is better because it avoids the degradation caused by the process of combining and separating.THE INGREDIENTS: YIQ-X uses a solid Silver-Plated center conductor insulated with Hard Cell Foam (HCF). Silver-plating greatly improves high frequency performance for a fraction of the cost of solid silver. Nitrogen Injected HCF reduces distortion caused by the insulating material, and helps maintain a stable 75ý. The combination foil and braid shield provides 100% protection coverage. Gold-Plated RCA connectors are professionally attached with superior AudioQuest solder.
 

*Pdf caratteristiche e  listino prezzi

AUDIOQUEST YIQ-1  Per misure e  prezzi  scontati  TELEFONARE/EMAIL

THE DEFINITION OF YIQ: CinemaQuest YIQ component video cables include three identical maximum performance coaxial cables, one for each of the three component signals; the “Y” (b&w) signal and the “I” and “Q” signals (also known as Pb and Pr), which contain all the color information. In the two channel S-video system (also known as Y/C), the “I” and “Q” component signals are combined to create a single “C” signal. When available, a three channel component signal is better because it avoids the degradation caused by the process of combining and separating.THE INGREDIENTS: YIQ-1 uses a 2.5% Silver Center Conductor (2.5% SPC) insulated with Hard Cell Foam (HCF). Normal 1.25% silver-plate greatly improves high frequency performance for a fraction of the cost of solid silver. A 2.5% silver conductor is much closer to all silver, still for a fraction of the cost. Nitrogen Injected HCF reduces distortion caused by the insulating material. The combination foil and Silver-Plated braid shield provides 100% protection coverage and lower distortion. Gold-Plated RCA, BNC or D-Sub 15 connectors are professionally attached with superior AudioQuest solder.

*Pdf caratteristiche e  listino prezzi

AUDIOQUEST YIQ-3  Per misure e  prezzi  scontati  TELEFONARE/EMAIL

THE DEFINITION OF YIQ: CinemaQuest YIQ component video cables include three identical maximum performance coaxial cables, one for each of the three component signals; the “Y” (b&w) signal and the “I” and “Q” signals (also known as Pb and Pr), which contain all the color information. In the two channel S-video system (also known as Y/C), the “I” and “Q” component signals are combined to create a single “C” signal. When available, a three channel component signal is better because it avoids the degradation caused by the process of combining and separating.THE INGREDIENTS: YIQ-3 uses a 6.1% Silver Center Conductor (6.1% SPC) insulated with Hard Cell Foam (HCF). Normal 1.25% silver-plate greatly improves high frequency performance for a fraction of the cost of solid silver. A 6.1% silver conductor is much closer to all silver, still for a fraction of the cost. Nitrogen Injected HCF reduces distortion caused by the insulating material. The combination Copper foil and Silver-Plated braid shield provides 100% protection coverage and lower distortion. Gold-Plated RCA, BNC or D-Sub 15 connectors are professionally attached with superior AudioQuest solder.

*Pdf caratteristiche e  listino prezzi

AUDIOQUEST YIQ-5  Per misure e  prezzi  scontati  TELEFONARE/EMAIL

THE DEFINITION OF YIQ: CinemaQuest YIQ component video cables include three identical maximum performance coaxial cables, one for each of the three component signals; the “Y” (b&w) signal and the “I” and “Q” signals (also known as Pb and Pr), which contain all the color information. In the two channel S-video system (also known as Y/C), the “I” and “Q” component signals are combined to create a single “C” signal. When available, a three channel component signal is better because it avoids the degradation caused by the process of combining and separating.THE INGREDIENTS: YIQ-5 uses a Solid Silver (Perfect-Surface Silver) center conductor insulated with Hard-Cell Foam (HCF). Normal 1.25% silver-plate greatly improves high frequency performance for a fraction of the cost of solid silver. 2.5% and 6.1% silver conductors allow much higher performance. However, solid silver made using Perfect-Surface technology is the clear answer to “How good can it get?” Nitrogen Injected HCF reduces distortion caused by the insulating material. The combination Conductive PVC and Silver-Plated braid shield provides 100% protection coverage and lower distortion. Silver-Plated RCA plugs are welded to YIQ-5 with 8,000 amps, commingling the molecules for an ideal connection. BNC and D-Sub 15 connectors are also available.

CAVI SCART

Telefona o invia un  e-mail per avere l'ultimo prezzo   0174 670100   Telefona o invia un  e-mail per avere l'ultimo prezzo 0174 670100  info@sinergy.us

*Pdf caratteristiche e  listino pre

AUDIOQUEST A-SCART     Per misure e  prezzi  scontati  TELEFONARE/EMAIL

VIDEO: All the video conductors use solid Silver-Plated Copper (SPC). Silver-Plating greatly improves high frequency performance for a fraction of the cost of solid silver. Nitrogen Injected Hard Cell Foam insulation (HCF) reduces distortion caused by the insulating material, and helps maintain a stable 75W. The combination foil and braid shield provides 100% protection. AUDIO: The audio cables each use two identical solid Long-Grain Copper (LGC) conductors. Solid conductors prevent strand interaction, which is the greatest single source of cable distortion. The simpler grain structure and fewer impurities within LGC copper significantly reduce distortion compared to normal high-purity copper. A 100% coverage shield insures noise-free performance. Gold-Plated plugs are professionally attached with specially formulated AudioQuest solder.

*Pdf caratteristiche e  listino prezzi

AUDIOQUEST X-SCART     Per misure e  prezzi  scontati  TELEFONARE/EMAIL

X-SCART uses Silver Plated Foam Insulated 75ý video cables and Solid Long Grain Copper audio cables for a sharper picture and more natural sound.  Silver is the single most effective way to provide clearly superior video performance. Foam insulation minimizes distortion caused by any solid material next to a conductor. Rigid 75ý construction ensures electrical compatibility and minimum reflections.Strand interaction is the single greatest source of cable distortion. Solid conductors eliminate this common problem. Inside a metal conductor there are actually thousands of connections between "grains." Low Oxygen content Long Grain Copper (LGC) minimizes harshness and confusion caused by these interior connections.

*Pdf caratteristiche e  listino prezzi

AUDIOQUEST 1-SCART     Per misure e  prezzi  scontati  TELEFONARE/EMAIL

SOLID 2.5% SILVER VIDEO conductors from France significantly outperform more common premium 1.25% silver-plate. SILVER-PLATED VIDEO SHIELD reduces distortion and provides 100% protection. NITROGEN-INJECTED HARD-CELL FOAM minimizes loss and maintains crucial stable 75Ω impedance. SOLID CONDUCTORS provide superior performance for all signals by eliminating strand-interaction
distortion. LONG-GRAIN COPPER AUDIO conductors provide beautiful, natural, easy-to-understand sound. IDENTICAL +/- AUDIO conductors maintain signal integrity. 1 (SCART To RGB + SYNC) VIDEO CABLE: SCART SOLID 2.5% SILVER Conductors from France significantly outperform more common premium 1.25% silver-plate. SILVER-PLATED SHIELD Reduces distortion and provides 100% protection.
NITROGEN-INJECTED HARD-CELL FOAM Minimizes loss and maintains crucial stable 75Ω impedance. SOLID CONDUCTORS provide superior performance by eliminating strand-interaction distortion. AQ SILVER-SOLDER AND GOLD CONTACTS ensure highest performance.

*Pdf caratteristiche e  listino prezzi

AUDIOQUEST 3-SCART     Per misure e  prezzi  scontati  TELEFONARE/EMAIL

SOLID 2.5% SILVER VIDEO conductors from France significantly outperform more common premium 1.25% silver-plate. SILVER-PLATED VIDEO SHIELD reduces distortion and provides 100% protection. NITROGEN-INJECTED HARD-CELL FOAM minimizes loss and maintains crucial stable 75Ω impedance. SOLID CONDUCTORS provide superior performance for all signals by eliminating strand-interaction
distortion. LONG-GRAIN COPPER AUDIO conductors provide beautiful, natural, easy-to-understand sound. IDENTICAL +/- AUDIO conductors maintain signal integrity. 1 (SCART To RGB + SYNC) VIDEO CABLE: SCART SOLID 2.5% SILVER Conductors from France significantly outperform more common premium 1.25% silver-plate. SILVER-PLATED SHIELD Reduces distortion and provides 100% protection.
NITROGEN-INJECTED HARD-CELL FOAM Minimizes loss and maintains crucial stable 75Ω impedance. SOLID CONDUCTORS provide superior performance by eliminating strand-interaction distortion. AQ SILVER-SOLDER AND GOLD CONTACTS ensure highest performance.

Audioquest Cavi Audio             PREZZO OFFERTA SCONTO 30%

 Per maggiori informazioni e prezzi scaricare la Scheda Tecnica in formato PDF

Audioquest Cavi Digitali            PREZZO OFFERTA SCONTO 30%

Per maggiori informazioni e prezzi scaricare la Scheda Tecnica in formato PDF

Audioquest Mini Plugs              PREZZO OFFERTA SCONTO 30%

Per maggiori informazioni e prezzi scaricare la Scheda Tecnica in formato PDF

Audioquest Cavi per Bracci            PREZZO OFFERTA SCONTO 30%

Per maggiori informazioni e prezzi scaricare la Scheda Tecnica in formato PDF

Audioquest Cavi per SUB              PREZZO OFFERTA SCONTO 30%

Per maggiori informazioni e prezzi scaricare la Scheda Tecnica in formato PDF

Audioquest ACC.GIRADISCHI              PREZZO OFFERTA SCONTO 30%

Per maggiori informazioni e prezzi scar

Audioquest Duplicazione                  PREZZO OFFERTA SCONTO 30%

Per maggiori informazioni e prezzi scaricare la Scheda Tecnica in formato PDF

Audioquest DVI-D                         PREZZO OFFERTA SCONTO 30%

Per maggiori informazioni e prezzi scaricare la Scheda Tecnica in formato PDF

Audioquest IEE1934                        PREZZO OFFERTA SCONTO 30%

Per maggiori informazioni e prezzi scaricare la Scheda Tecnica in formato PDF

Audioquest S-Video(Y-C)                    PREZZO OFFERTA SCONTO 30%

Per maggiori informazioni e prezzi scaricare la Scheda Tecnica in formato PDF

Audioquest SCART                    PREZZO OFFERTA SCONTO 30%

Per maggiori informazioni e prezzi scaricare la Scheda Tecnica in formato PDF

Audioquest VIDEOCOMPOSITO               PREZZO OFFERTA SCONTO 30%

Per maggiori informazioni e prezzi scaricare la Scheda Tecnica in formato PDF

ACCESSORI

Audioquest VARIE               PREZZO OFFERTA SCONTO 30%

Per maggiori informazioni e prezzi scaricare la Scheda Tecnica

Audioquest ADATTATORI               PREZZO OFFERTA SCONTO 30%

Per maggiori informazioni e prezzi scaricare la Scheda Tecnica

Custom Installation

Audioquest Cavi di Potenza CL3/FT4       PREZZO OFFERTA SCONTO 30%

Per maggiori informazioni e prezzi scaricare la Scheda Tecnica

Audioquest Cavi audio/video       PREZZO OFFERTA SCONTO 30%

Per maggiori informazioni e prezzi scaricare la Scheda Tecnica

Audioquest Cavi Serie i              PREZZO OFFERTA SCONTO 30%

Per maggiori informazioni e prezzi scaricare la Scheda Tecnica

Audioquest Connettori itc             PREZZO OFFERTA SCONTO 30%

Per maggiori informazioni e prezzi scaricare la Scheda Tecnica

Attenzione 

Per ordinare o avere gli ultimi prezzi aggiornati telefona al  0174 670100 o invia un E-mail a  info@sinergy.us

Il presente listino sostituisce ed annulla ogni precedente.
Le caratteristiche e i prezzi indicati possono variare senza preavviso telefonare o inviare un e-mail per ulteriori domande e conferme sui prezzi sopra riportati. Prezzi franco nostro magazzino.
Tutti i marchi citati nel presente listino sono di proprietà e registrati alle rispettive Case Produttrici