|
TESTINE
Music Maker MKIII €.999,00
Per
ORDINE
TELEFONA / E-MAIL
Music Maker MKIII phono
cartridge testina MM di altissimo livello bobine in rame puro 990,00The 'MusicMaker'
Mk III Testina La testina 'MusicMaker' è una testina dalle altissime prestazioni
a riluttanza variabile, utilizzando uno stilo diamante con un estesa propria
area di contatto. Caratteristiche Voltaggio in uscita: 4mV Risposta di
Frequenza: 10Hz - 50KHz Separazione Stereo :>25dB tra 10Hz e 30KHz range
di frequenza Impedenza richiesta: 47K Ohm (come una Magnete mobile
standard) Peso testina: 6.2g Tipo di Stilo: Stilo diamante con un
estesa propria area di contatto peso di tracciamento: 1.58g +/- 0.05g tipo
di braccio rishiesto: da media a bassa massa (13g o meno) Bias
(anti-skate) richiesto: minimo The 'MusicMaker' Mk III Testina Len Gregory
(alias The Cartridge Man) non ha bisogno di essere presentato. Il suo scopo
nella vita sembra essere quello di tracciare un solco nel vinile in un modo
completamente unico e personale. Mentre praticamente tutte le testine hi-end
sono a bobina mobile (MC) lui ricostruisce una testina Grado a magnete mobile
con una strana puntina e ci regala una delle più dettagliate e neutre sorgenti
che io abbia mai avuto modo di ascoltare
 The
'MusicMaker' Phono Cartridge is a high-performance variable reluctance device,
employing a proprietory extended contact diamond stylus.
Specification Output voltage: 4mV Frequency response: 10Hz - 50KHz Stereo
separation:>25dB across 10Hz to 30KHz range Loading requirement: 47K Ohm
(standard moving magnet) Cartridge weight: 6.2g Stylus type:
proprietory extended contact area diamond Tracking force: 1.58g +/- 0.05g
(critical) Arm requirement: medium to low mass (13g or less) Bias
(anti-skate) requirements: minimal
Music Maker
Classic €.1.675,00
Per
ORDINE
TELEFONA / E-MAIL
Music Maker Classic phono
cartridge testina MM di altissimo livello bobine in argento 99,99 % di purezza
La Testina MusicMaker Classic La testina MusicMaker è il prodotto di un
programma costante del perfezionamento, esso ha preso circa quindici anni di
sviluppo per generare la versione di Mk III. Adesso ci siamo mossi ed abbiamo
fatto un prodotto spettacolare;ascoltare la MusicMaker Classic è come fare
un'altro passo per avvicinarsi il più possibile all'evento originale. Anziché le
bobine di rame di elevata purezza utilizzate nel Mk III le abbiamo sostituite
con bobine d'argento molto pure (al 99.99%) ed incorporato altri cambiamenti; il
risultato è un passo avanti importante nel riprodurre vinili analogici.
Specifiche tecniche: La testina stereo a resistenza variabile con stilo con
contatti in linea e bobine dell'argento. Uscita: 4.0 mV Impedenza: 47K Ohm
(capacità non sensibile.) Peso di tracciamento: 1.6 grammi. Allineamento di VTA/SRA:
Regolare perpendicolarmente rispetto alla superficie frontale anteriore della
Testina (osservata dal lato).
The
MusicMaker Classic Phono Cartridge The MusicMaker cartridge is the product of a
steady programme of refinement, it has taken approximately fifteen years of
development to create the Mk III version. We have now moved on and made a rather
dramatic change; enter the MusicMaker Classic which takes us another step closer
to the original performance. Instead of the high purity copper coils used in the
Mk III we have substituted very pure silver (99.99%) coils and incorporated
other changes; the result is a major step forward in analogue viny replay.
Specifications Variable-reluctance stereo phono cartridge with line-contact
stylus and silver coils. Output: 4.0 mV output Loading: 47K ohms (not
capacitance sensitive.) Tracking Force: 1.6 grams. VTA/SRA Alignment:
Front face of cartridge perpendicular to record surface (viewed from the side).
ACCESSORI
 
Music
Maker Classic
€.320,00
Per
ORDINE
TELEFONA / E-MAIL
La bilancia testina Digital turntable level (DLG) Bilancia per regolare il peso
di tracciamento delle testine
The
Cartridge Man Digital Stylus Force Gauge Users of vinyl are well aware of the
importance of being able to accurately set their cartridge tracking down-force.
Failure to do this can result in anything from degraded sonic performance,
through to mis-tracking and even damage to the record and stylus. The only
readily available method of setting the down-force has been the Shure Force
Balance - fine value for money, but suffering from only 0.1g resolution,
somewhat fiddly set-up and a slightly non-optimum measurement height. The
Cartridge Man has now introduced a highly accurate, enhanced measurement range,
easy-to-use and competitively priced all-electronic Digital Force Gauge. The
unit will prove itself indispensible when requiring an absolute and consistent
tracking force reference. Specification and features Measurement range: 0.2g to
4.0g. Accuracy: better than 0.05g over full measurement range
Resolution: 0.02g Useable period: 30 minutes per full charge
Display: 3-digit LED Status indication: Display test, battery, nulling,
overload Recharge cycle: ~ 14-24 hours Useable temperature: 5°C to
35°C Weight: 150g nominal Dimension: 45mm h x 87mm diameter
Construction: Non-magnetic, anti-slip feet Charge unit: 9V D.C. @ 100mA
output supplied
 
Music
Maker Classic
€.320,00
Per
ORDINE
TELEFONA / E-MAIL
La bolla digitale Digital Stylus Force Gauge (DFG) Bolla digitale per
regolazione fine del giradischi
It
is a well known fact that for optimum performance, a turntable should always be
precisely levelled. Whilst bubble-levels have always been used for the levelling
procedure, best accuracy is not always guaranteed and it can certainly be
frustrating to centre the bubble. The Cartridge Man has now introduced ahighly
accurate, easy-to-use and all-electronic Digital Levelling Gauge. This unit
presents a digital read-out of both planes simultaneously to a resolution and
accuracy of 0.1°. Four quadrant LEDs give an unambiguous indication of which
side(s) need lowering or raising. Specification and features Measurement range:
+35° to -35° Accuracy: better than 0.1° at level Resolution: 0.1° Useable
period:> 10 hours continuous Display: 2 x 3-digit LED and 4 x 3mm LEDs
Status indication: Display test, nulling Cell type: 2 x AAA Useable
temperature: 5°C to 35°C Weight: 195g nominal Dimension: 62mm h x
69mm diameter Construction: Non-magnetic, anti-static treated
 
Music Maker
Classic €.100,00
Per
ORDINE
TELEFONA / E-MAIL
L’isolatore per testine The
Cartridge Man Cartridge Isolator Isolatore antivibrazioni per isolare le testine
dal braccio testine
The
Cartridge Man Isolator The isolator is, in effect, a two way filter. Its
purpose is to break the mechanical feedback loop that is made as soon as the
stylus touches the record. In tests, the isolator has been shown to reduce
the noise floor level by 3dB (a cut of 50%). This reduction allows far more low
level information into the audio picture, improving sound stage, imaging and
resolution, not to mention the overall timbre of instruments. The isolator has
attracted praise in the Hi Fi press, in spite of the generally accepted
philosophy about cartridge mounting being the complete opposite of that which
its use advocates. The Isolator will make a good arm a great arm, but it
will not make a poor arm a good one.
 .jpg) .jpg)
Music Maker
Classic €.1.785,00
Per
ORDINE
TELEFONA / E-MAIL
Il braccio con sospensione ad aria The Cartridge Man Conductor air bearing
pick-up arm Braccio su cuscinetto ad aria (Completo di tubi, pompa, e serbatoio)
The
Conductor Air Bearing Tonearm The playback of a record should imitate the
cutting of the lacquer as closely as possible. During the cutting process the
cutter diamond makes an angle of 90 degrees at all instances from the beginning
of the groove to its end. Obviously, the best way to read a record groove is by
using an arm which follows the groove in a similar fashion as in the cutting
process.A parallel tracking tonearm has the least distortion because the
tracking error is minimized to practically zero. The cartridge stylus reads the
two groove walls at the same time without any delay. Furthermore, a parallel
tracking tonearm does not need bias compensation (anti-skate settings), as there
is no centripetal force, unlike in pivoted arms.Pivoted arms, on the other hand,
are the most commonly used tonearms. These can be further subdivided into
unipivots and non-unipivots, as well as pseudo-unipivots.With common pivoted
arms (also called radial arms), there is zero tracking error only in two
instances. At other points, there is tracking error. This is minimized by giving
the pivoted arm the familiar offset angle. The skating force is not eliminated,
however, but instead increases. This can be corrected, of course.Unfortunately,
the skating force depends on the friction between the record groove and the
stylus tip, as well as the cut of the stylus. It also depends on what is
recorded on the record, even the quality of the vinyl. As one can see,
correcting anti-skate is always not perfect, technically. All this ceases to be
an issue with a tangential tonearm, as there is no skating force.Basically,
setting up pivoted arms properly with the various tools around is essential to
minimize these tracking errors, as well as controlling the skating
force.Designing and manufacturing a parallel tracking tonearm is not as simple
as it may seem and only thorough engineering can result in a good functioning
device. Precise and accurate geometrical proportions are essential to get it
right. As a result, prices of the high-end parallel tracking arms are in most
cases far beyond the budget of most audiophiles and music lovers. And this is
where The Conductor comes in. Simplified, but without sacrificing the benefits
of tangential tonearms, sonically high-end, and most importantly offered at a
saner price than the other high-end competition.
Music Maker
Classic €.
37,00
Per
ORDINE
TELEFONA / E-MAIL
Il disco Test per i giradischi Cartridge Man/ Hi Fi News Test record Disco test
per la regolazione fine dei giradischi
The
HI-Fi News Test Record As a response to the lack of newly produced test records,
and due to customers requiring a definitive means of setting up their vinyl
replay systems, the Cartridge Man has, on the back of the success of his
previous test LP, produced an all-new test record. Recorded onto audiophile
quality 180g vinyl, the new version also includes a full-sized set-up protractor
and includes an additional frequency sweep test. Test Record specifications and
features: Channel identification Phase check Channel balance Pink noise
L/R Anti-skate/bias setting Tracking ability Cartridge/arm lateral
resonance Cartridge azimuth Residual system noise check 20Hz
to 20kHz frequency sweep Set-up protractor Recorded onto audiophile 180g vinyl
Legenda istruzioni
Clicca
per qui per vedere : FOTO PRODOTTO
 Clicca
per qui per vedere : ISTRUZIONI PRODOTTO
 Clicca
per qui per vedere : CATALOGO,PROVA RIVISTE SPECIALIZZATE PRODOTTO
 Clicca
per qui per vedere : DATI TECNICI SPECIFICHE
PRODOTTO
Attenzione
Per ordinare o avere
gli ultimi prezzi aggiornati telefona al
0174 670100
o invia un E-mail a
info@sinergy.us
Il presente listino
sostituisce ed annulla ogni precedente.I prezzi indicati si
riferiscono a LISTINO UFFICIALE Le caratteristiche e i prezzi indicati possono variare senza
preavviso telefonare o inviare un e-mail per ulteriori domande e
conferme sui prezzi sopra riportati.
Prezzi
franco nostro magazzino.
Tutti i marchi citati nel presente listino sono di proprietà e
registrati alle rispettive Case Produttrici | 
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
Attenzione 
