HIFI  TV  VIDEO DIFFUSORI  PROIETTORI  SAT  POLTRONE   DIVANI   ARREDO SONORIZZAZIONI AMBIENTI  HIFI  TV  VIDEO DIFFUSORI  PROIETTORI  SAT  POLTRONE   DIVANI   POLTRONE UFFICIO  ARREDO SONORIZZAZIONI AMBIENTI 

 

ProAc viene considerato da molti il miglior fabbricante di diffusori hi-end al mondo. Molti rinomati professionisti utilizzano i diffusori ProAc sia in studio di registrazione sia in ambito domestico. Se conoscete il suono ProAc sapete che tutti i diffusori prodotti da questa casa sono facilmente identificabili, grazie alle loro caratteristiche soniche comuni. Se non conoscete i diffusori ProAc ascoltateli, nessuno è mai rimasto deluso, molti hanno cambiato i propri diffusori di riferimento in favore delle creazioni di questo grande marchio inglese

Even in the short history of high-end high fidelity, few companies have lasted the course. Even fewer have consistently developed and produced high quality products which have earned international acclaim. ProAc is one such company.The ProAc range is, as they say, reassuringly expensive. We do not make cheap loudspeakers and certainly do not produce cheap sounds. Happily, many thousands of audiophiles worldwide agree with our philosophy.Every ProAc loudspeaker is hand-crafted, with our technicians individually responsible for the building and testing of each unit, from the flagship Response models to the diminutive Tablette. Build quality alone is unsurpassed, each cabinet being meticulously constructed, damped and finished in real wood veneer.Only the very finest components are used in ProAc loudspeakers, with each new model reflecting the very leading edge of audio technology. Indeed many models now incorporate dedicated driveunits using our own basket, cone and magnet assemblies. Drive unit performance is fine-tuned through expensive and sophisticated crossover networks .But all the finest cabinets and components in the world are redundant without inspired design. And for a quarter of a century Stewart Tyler, Chairman and Chief Designer has been responsible for putting it all together and producing the performance. He alone decides the cabinet size and configuration, drive unit layout and crossover design and all the other factors which combine to produce some of the most cultured sounds available in modern audio.ProAc loudspeakers are available through a network of enlightened dealers who will be pleased not only to put our models through their paces, but to give informed advice on partnering equipment. When you think you've heard the best, then go and hear ProAc.


SERIE TABLETTETelefona o invia un  e-mail per avere l'ultimo prezzo   0174 670100   Telefona o invia un  e-mail per avere l'ultimo prezzo 0174 670100  info@sinergy.us


ProAc TABLETTE 10       Listino ufficiale   €.    730,00         Per ordine e sconto TELEFONA / E-MAIL

Tablette 10 - NOVITA' Diffusore in sospensione pneumatica da scaffale/stand a 2 vie, 5-50 watt, 10 ohm, 86dB, bi-wired. Dimensioni (LxAxP): 190,5x304,8x158,75 mm.

The new ProAc Tablette 10 is a tenth generation of the Tablettes launched in 1979. The Tablette 10 is an all new design, using a thin walled heavy damped infinite baffle enclosure which is the same as the BBC LS3/5a. This design allows the Tablette 10 to be positioned against the wall, unlike a ported enclosure (not recommended). The new Tablette 10 has cutting edge new drive units, the bass driver has a Paginna Mika cone which is reed leaves mixed with Mika and coated with an acoustic dope. The crossover has been specially designed for a sealed enclosure with a network which shapes the response to give a rich bass and an extremely transparent midrange. The tweeter is our well known 1 inch silk dome used in many of ProAc's other models. During the design several speakers were used as comparison those being the LS3/5a, ProAc D2, Spender BC1 and Quad Esl 57. We urge people to listen and compare with other makes and models as we are sure you will find the music intoxicating. The Tablette 10  Specifications Nominal Impedance 10 ohms Recommended Amplifiers 5 to 50 watts Sensitivity 86 dB linear for 1 watt at 1 metre Bass Driver ProAc 5" with Paganni Mika cone, with acoustic coat. Crossover Finest components on dedicated circuit board. Multistrand oxygen free copper cable throughout. Split for optional Bi Wiring or Bi Amplification. Dimensions Height: 12" (304.80mm), Width: 7" 1/2 (190.50mm), Depth: 6" 1/4 (158.75mm) including grille Mode Stand/Shelf mounting Grille Acoustically transparent crimplene Finish Standard Finishes: Black Ash, Mahogany, Cherry, Maple, Silk White. Premium Finishes: Rosewood, Ebony. *Premium Finishes to order at extra cost

ProAc TABLETTE ANNIVERSARY  Listino ufficiale       €. 1.312,00       Per ordine e sconto TELEFONA / E-MAIL

Diffusore bass reflex da scaffale/stand a 2 vie, 10-120 watt, 8 ohm, 35hz-30khz, 86,5dB, bi-wired. Dimensioni (LxAxP in mm): 150x270x235 Colori  : ciliegio,Frassino nero,Mogano, Acero.  Per   colori   Ebano,Acero pernice, Palissandro   1.155,00  euro

The Tablette Reference Eight, launched in 2001, has proved a hugely successful restatement of the original Tablette design of 1979. Reborn in its earliest cabinet configuration but housing far more technically refined and powerful drive units, it produces a scale and quality of sound unimaginable over two decades ago. Now however, this enduring design scales new heights with the Reference Eight Signature.At the heart of this major leap forward is a remarkable new bass/midrange driver. Four times as expensive as the standard unit used in the Reference Eight, this new driver incorporates a neodymium bar magnet, copper rings and a copper phase plug. These components add up to vastly improved performance, with even greater linearity and lower distortion. The bass is more excitingly dynamic and the midrange considerably more open. Loading is by small twin reflex ports which reduce unwanted colouration.A high quality crossover network is coupled directly to the terminals to eradicate any deterioration in the signal paths. This redesigned board incorporates a larger bass inductor than the original Tablette and gives higher output with lower distortion. The crossover knits the midrange seamlessly to the output of the completely new tweeter, a sophisticated 1" soft dome unit with a large surround which produces an exceptionally flat response, outstanding smoothness and fine detail.The cabinet itself is made from costly marine birch ply which is critically damped and tuned with high grade acoustic material. As ever with ProAc loudspeakers, the Reference Eight Signatures are completed by exquisite real wood veneer, but in keeping with their exclusivity are only available in the most exotic finishes.The Tablette Reference Eight Signature is a definitive monitor level design. The remarkably flat frequency response is characterised by a smooth, natural and detailed output delivered with a surprising level of power, weight and scale. This diminutive powerhouse can be placed on shelves or ledges, but for true highend listening is best mounted on heavy rigid stands.


SERIE  STUDIOTelefona o invia un  e-mail per avere l'ultimo prezzo   0174 670100   Telefona o invia un  e-mail per avere l'ultimo prezzo 0174 670100  info@sinergy.us


ProAc  STUDIO SM100   Listino ufficiale   €. 1.535,00     Per ordine e sconto TELEFONA / E-MAIL

Dopo un successo internazionale durato ben vent'anni, Stewart Tyler presenta Studio SM 100, successore del celebre modello Studio 100, apprezzato universalmente come diffusore near field monitor negli studi di registrazione e come ottimo interprete musicale nel salotto di casa da moltissimi celebri artisti e operatori dell'industria discografica, oltre che da appassionati dell'Alta Fedeltà. Progettato per ben due anni direttamente dalla mente creativa di ProAc, il designer Stewart Tyler, il nuovo diffusore da stand Studio SM 100 presenta una componentistica migliorata puntando alle medesime sonorità del modello Studio 100, ma offrendo una minore distorsione grazie al nuovo tweeter, una maggior tenuta in potenza e una maggior longevità del woofer, complessivamente restituendo un suono leggermente più morbido che permette un ascolto mai affaticante per lunghe sessioni di utilizzo.Diffusore bass reflex da scaffale a 2 vie, 30-150 watt, 8 ohm, 35hz-30khz, 88dB, bi-wired, magneti schermati. Il successore dell'acclamato modello Studio 100. Dimensioni (LxAxP): 203x406x254 mm. Peso:12 kg. La coppia. Finitura ciliegio

The ProAc studio 100 was produced for over 20 years until 2013. They were made for both domestic and studio use. The studio 100 quickly became a favourite in the studios used as a near field monitor For the last 2 years Stewart Tyler has been working on a new speaker named the ProAc SM100 and all parameters have been improved for both studio and domestic use. It now has a new bass driver with a new surround and dust cap along with a brand new 1 inch domed tweeter and crossover network, however the cabinet remains the same.
The bass driver looks similar but has a new rubber surround for longevity and power handling and now comes in a ProAc basket. The tweeter is a new ProAc design with a 1 inch silk dome and a front plate to lower distortion, the dome has a new roll surround. MThe SM100 also features a new crossover, the overall sound quality is similar to the studio 100 but slightly smoother sound makes it ideal for long listening sessions. MFor further details contact ProAc via our website or ProAc dealer direct.

ProAc  STUDIO 115   Listino ufficiale   €. 1.040,00        Per ordine e sconto TELEFONA / E-MAIL

Il progettista Stewart Tyler rinnova la gamma dei diffusori della serie Studio dando vita al diffusore ProAc Studio 115, il successore di Studio 110, uno dei diffusori ProAc di maggior successo.Seguendo le orme del predecessore, il nuovo diffusore Studio 115 si presenta come un diffusore compatto dalle prestazioni elevatissime, con un rapporto qualità prezzo che lo pone seriamente in rilievo sull'offerta di mercato, e dotato del caratteristico suono ProAc presente in ogni diffusore creato dalla mente del progettista inglese.Studio 115 rivede completamente la componentistica; il nuovo mid-woofer è il medesimo altoparlante da 165mm utilizzato nei diffusori da pavimento ProAc Studio 140 MkII, il tweeter è un nuovissimo progetto ProAc a cupola morbida da 20mm. Il mobile del diffusore è stato snellito e acquisisce ulteriore rigidità per ridurre le riflessioni del frontale, e presenta il condotto del tubo d'accordo posizionato centralmente per ottimizzare l'emissione delle basse frequenze. Il crossover è un progetto ex novo che impiega esclusivamente componenti di prim'ordine. I morsetti sui terminali sono ora i medesimi impiegati sulla serie superiore Response. Studio 115
Diffusore bass reflex da scaffale/stand a 2 vie, 15-150 watt, 8 ohm, 30hz-30khz, 88,5dB, bi-wired, magneti schermati. Dimensioni (LxAxP): 190x380x240 mm. Peso: 8,9 kg.

ProAc proudly announce the launch of the Studio 115 all new compact monitor. The cabinet, drive units, crossover and terminals have all been upgraded from the previous model, the Studio 110 and a narrower cabinet front baffle has been utilised to aid dispersion and produce a bigger soundstage. The cabinet features bitumous damping and the port tube for bass loading is now centrally located on the front baffle with the new bass driver. The new bass driver is manufactured from carbon filled polyproalene; A material which gives all the inherent advantages of cone stiffness such as a lucid bass quality and natural, detailed presentation. It is also an ideal material with which to minimise distortion characteristics and has contributed significantly to the success of the Studio 140 Mk 2. The bass driver crosses over to a brand new tweeter developed by ProAc which has a special dome with air-cooling. The crossover network components have been upgraded to seamlessly integrate the new drivers.The Studio 115 is designed to work with all levels of quality equipment, from a modest set-up to a true high-end system, producing highly musical results in the true ProAc compact monitor tradition.

ProAc  STUDIO 118   Listino ufficiale   €. 1.155,00           Per ordine e sconto TELEFONA / E-MAIL

Diffusore bass reflex da scaffale a 2 vie, 15-150 watt, 4 ohm, 30hz-30khz, 88,5dB, bi-wired, magneti schermati. Dimensioni (LxAxP): 190x380x241 mm. Peso: 8,9 kg.

The new studio 118 is a new stand mounting design. It comes in a variety of real wood veneers and the sound quality belies the size of the enclosure. The 118 has a new bass driver, with a great deal of research into cone materials, the new 118 unit excels in bass and mid-range performance and is further helped by a phase plug. The bass driver is loaded through a port making a reflex design, it also has a new magnet assembly giving a better bass response with a more open and better dispersion on mid-range frequencies.The tweeter has our iconic ProAc 20mm tweeter to cover high frequencies which it does in a sweet and detailed manner. A new crossover has been design to match the two units to give a wonderfully large sound stage with pinpoint imagery. The 118 is excellent on all types of music and more efficient than previous models, which make it suitable for lower powered valve and transistor amplifiers.  Specifications Nominal Impedance  8 ohms Recommended Amplifiers  15 to 150 watts  Frequency Response  30Hz to 30KHz  Sensitivity  88.5 dB linear for 1 watt at 1 metre  Bass Driver  6.5 inch (165mm) ProAc unit with new coated cone and phase plug for greater dispersion. Tweeter  20mm all new ProAc silk dome. Crossover HQ network using the finest components with option for bi wiring / bi-amping and utilising oxygen free cable.  Dimensions  15.2" (380mm) high, 7.6" (190mm) wide, 9.64" (241mm) deep (including grill) Weight  19.6 lb (8.9kg) each unpacked.  Mode   Stand Mounted  Grille Acoustically transparent crimplene  Finish  Standard Finishes: Black Ash, Mahogany, Cherry, Maple.

ProAc  STUDIO 148    Listino ufficiale    €.1.925,00         Per ordine e sconto TELEFONA / E-MAIL

Studio 148 -Diffusore bass reflex da pavimento a 2 vie, 15-250 watt, 4 ohm, 25hz-30khz, 91dB, bi-wired, magneti schermati. Dimensioni (LxAxP): 190x1.040x280 mm. Peso: 19 kg.

Overview ProAc's latest the studio 148 is a narrow columnar design with a stabilising plinth and bass port pre-drilled for adjustable spikes. The beautiful and real wood veneers are impeccable making it suitable for all types of room design. There are 3 drive units in each enclosure, the two 6.5 inch units cover bass frequencies but each one has been mechanically tuned to cover mid frequencies. To improve dispersion the upper bass driver has a phase plug whilst the lower unit has a ProAc open weave cap. This gives the 148 tremendous bass power and depth with a clear precise mid range. The bass drivers crossover to the ProAc 1 inch silk dome tweeter used in many other ProAc models. The bass drivers are loaded by a port in the bottom of the cabinet and through the plinth. Spikes are used to raise the cabinet allowing air to move under the enclosure and through the port. Improvements can be heard in all areas from a tight, cleaner and extended bass through a detailed mid-range with a sweet and detailed high frequency, the 148 also has a large spectacular sound stage with pin point imagery. The studio 148 comes in a variety of real wood veneers and is above average for efficiency, meaning the use of small high quality valve amplifiers and transistor amplifiers.Specifications Nominal Impedance 4 ohms Recommended Amplifiers 15 to 250 watts Frequency Response 25Hz to 30KHz Sensitivity 91 dB linear for 1 watt at 1 metre Bass Driver 2 x 6.5" (165mm) ProAc units with coated cone and mechanical tuning with dust cap and phase plug. Tweeter 1" (25mm) silk dome air cooled with inner dome damping mirror image offset. Crossover HQ network using the finest components with option for bi wiring / bi-amping and utilising oxygen free cable and response terminals. Dimensions Height: 41" (1040mm), Width: 7.5" (190mm), Depth: 11" (280mm) with grill Weight 42 lb (19 kg) each unpacked. Mode Floor standing with spikes. Grille Acoustically transparent crimplene. Finish Standard Finishes: Black Ash, Mahogany, Cherry, Maple.


SERIE RESPONCETelefona o invia un  e-mail per avere l'ultimo prezzo   0174 670100   Telefona o invia un  e-mail per avere l'ultimo prezzo 0174 670100  info@sinergy.us


ProAc RESPONCE DB1    Listino ufficiale    €. 1.637,00         Per ordine e sconto TELEFONA / E-MAIL

Per molto tempo il modello Response  è stato uno dei mini-monitor più diffusi al mondo, ma oggi il   RESPONCE ONE  gli ha 'rubato il trono'. Significativi miglioramenti ad alta tecnologia sono stati effettuati al driver dei bassi, nel mobile e sul crossover. Il baffle del mobile è più sottile per aiutare la dispersione, e ora è dotato di uno speciale materiale smorzante che rende il mobile molto robusto e inerte. L'altoparlante dei bassi completamente nuovo risiede ora su uno chassis ProAc, che ha una struttura a ragno rialzata e un materiale del cono simile a quello utilizzato nel diffusore D2. Esso incorpora il sistema di magnete EXCEL e una presa acrilica a smorzamento di fase. Ulteriori miglioramenti sono stati effettuati al crossover. I risultati sono un basso più d'impatto, toni medi più aperti e ricchi, frequenze alte più dettagliate. Il D1 è anche più efficiente di ben 1,5 dB rispetto all'1SC rendendolo più facile da pilotare anche disponendo di un amplificatore con ridotta potenza d'uscita. Specifiche Impedenza: 8 ohm Amplificazione: da 20 to 100 watt Risposta in frequenza: da 38Hz a 30kHz Sensibilità: 87,5 db lineari / 1 watt / 1 metro Mediobassi: altoparlante da 130mm ProAc con cono in fibra di vetro intrecciata, struttura a ragno rialzata, magnete sistema Excel e presa acrilica a smorzamento di fase, chassis assemblato a motore lineare, magnete in rame e presa di fase. Materiale del cono esclusivo ProAc Alti: altoparlante a cupola da 3/4, bobina a nido d'ape con smorzamento speciale raffreddato a ferrofluido. Crossover: vengono utilizzati i migliori componenti assemblati su una scheda dedicata dotata di cablaggio multistrand in rame privo di ossigeno. Bi-wiring e bi-amping opzionali.Dimensioni (LxAxP): 168x305x260mm (la profondità include la griglia spessa 12mm) Peso: 9kg Utilizzo: su stand Griglia: crimplene trasparente Finitura: impiallicciature in vero legno Finiture standard: nero cenere, mogano, cigliegio, acero

For many years the Response 1SC has been one of the world’s leading mini monitors but now the D1 has stolen its crown. High tech improvements have been made to the cabinet, bass driver, and crossover network.he cabinet baffle is slimmer to aid dispersion, and now has a special damping material making the cabinet very heavy and inert.The all-new bass driver is now on a ProAc chassis, this has a raised spider and similar cone material to the D2. It also features the EXCEL magnet system and a new acrylic damping phase plug.Further improvements have been made to the crossover network. The results are a punchier bass, richer more open midrange, with sweet and detailed high frequencies. The D1 is also 1.5 dB more efficient than the 1SC making it easier to drive for those who have amplifiers with a lower output.Technical Info Close window Taking miniature loudspeaker performance to new heights  Nominal Impedance  8 ohms  Recommended Amplifiers 20 to 100 watts  Frequency Response  38Hz to 30kHz  Sensitivity  87.5 db linear for 1 watt at 1 metre Cabinet Heavy, inert construction damped with special material and featuring slim, rigid front baffle design to aid dispersion.  Bass/Midrange Driver New 5" (130mm) ProAc unit featuring glass fibre weave cone, raised spider assembly, EXCEL magnet system and unique acrylic damping phase plug. Tweeter ProAc ¾ dome unit with honeycomb wound voice coil, special damping and ferrofluid-cooled coil assembly.  Crossover  Finest components on dedicated circuit board with multistrand oxygen-free copper cable throughout. Split for optional bi-wiring/bi-amping.  Dimensions 12" (305mm) high 6 5/8" (168mm) wide 10 1/4" (260mm) deep including grille thickness of 12mm Weight  20lbs (9 Kgs)  Mode  Stand mounted  Grille  Acoustically transparent crimplene  Finish  ,Finish Available in the following real wood veneers: Black Ash, Mahogany, Cherry, and Maple. Ebony to order at extra cost. * Due to our policy of continuous improvement specifications are subject to change without notice.

 

ProAc RESPONCE D2   Listino ufficiale    €.  1.720,00          Per ordine e sconto TELEFONA / E-MAIL

Response D Two Diffusore bass reflex da scaffale a 2 vie, 20-150 watt, 8 ohm, 30hz-30khz, 88,5dB, biwired. Dimensioni (LxAxP in mm): 203x430x260. Altezza punte incluse. Disponibile in finitura ciliegio, frassino nero,bianco  mogano, acero,+€. 685,00  euro  per  palissandro, ebano, acero a occhio di pavone.

ProAc loudspeakers have a reputation for exceptional sound and build quality. Our enclosures may look conventional but this hides the advanced technology required to build a rigid and well-damped cabinet. Our loudspeakers are made in our factory at Brackley, England. They are slim and elegant, finished in gorgeous real wood veneer.With first class sound quality, you’ll be listening to ProAc speakers long after you would have become tired of a fashionable but poor sounding alternative. We are renowned for producing compact high-end speakers evidenced by both Tablette and Response 1SC which have become iconic over the years.The Response D TWO is a new speaker in this fine tradition, designed for the finest quality music and giving true monitor performance. The cabinet is made from a heavily damped, thin-wall rigid birch ply carcass, with a 25mm back panel. The bass driver is new, using the same cone technology as the Response D15 but with a revised coil and magnet. The tweeter is the same 1" silk dome as used in other ProAc models and the drive units are seamlessly mated with an HQ network designed and built by ProAc. Sound quality from the D TWO is one of extreme transparency; a lush and potent bass response and a silky detailed high frequency. The D TWO also have a huge sound stage with pinpoint imagery. The speakers are designed to sit on high mass stands from 18" high depending on your seating position.

ProAc RESPONCE D20     Listino ufficiale      €.  2.392,00      Per ordine e sconto TELEFONA / E-MAIL

Response D 20 - Diffusore bass reflex da pavimento a 2 vie, 20-180 watt, 8 ohm, 28hz-33khz, 88,5db, bi-wired, tweeter a cupola Dimensioni (LxAxP): 190x960x227 mm (punte incluse). Peso: 26 kg.

        

ProAc RESPONCE D20R    Listino ufficiale      €.  2.392,00    Per ordine e sconto TELEFONA / E-MAIL

Diffusore bass reflex da pavimento a 2 vie, 20-180 watt, 8 ohm, 28hz-33khz,  88,5db, bi-wired, tweeter a nastro.  Dimensioni (LxAxP): 190x960x227 mm (punte incluse). Peso: 26 kg.

ProAc Response D20R speakers In order to satisfy demand for Ribbon loaded tweeter speakers ProAc are introducing the brand new Response D20R. The New model takes lot from current ProAc range, most notably the same midrange/bass driver you find in the critically acclaimed D18's and the same Bass loading system you find in the bigger D30R's to offer a powerful bass response with good extension and low colouration. The crossover network features audiophile grade components to accurately merge the ribbon tweeter and bass/ midrange unit together seamlessly, whilst never getting in the way of the music. Bass loading by the cabinet has been improved over the D18 to give a solid bass delivery, to create incredibly lifelike sound stage. This combination offers a light, airy and detailed high frequency response but with a powerful bass extension and clear natural midrange to satisfy even the most critical ear. A selection of beautiful real wood veneers enable the D20R's to look just as good as they sound.Frequency Response 28Hz to 33KHz
Sensitivity 88.5 dB linear for 1 watt at 1 metre  Bass Midrange driver 6.5" (165mm) ProAc unit fitted features glass fibre weave cone, Excel Magnet system and unique acrylic damping phase plug.
Ribbon tweeter ProAc ribbon 60mm by 10 mm as light as a human hair, with rear chamber damping.  Crossover network Audiophile components on dedicated circuit board. Multi-strand oxygen free copper cable throughout. Split for optional bi-wiring or bi-amplification  Recommended amplifier power 20 to 180 watts  Impedance 8Ω Weight 26kg each  Dimensions  Height: 38.4" (960mm) plus Spikes Width: 7.6" (190mm) Depth: 9.1" (227mm)

ProAc RESPONCE D30  Listino ufficiale     €. 3.835,00      Per ordine e sconto TELEFONA / E-MAIL

Diffusore bass reflex da pavimento a 2 vie, 10-200 watt, 8 ohm, 20hz-30khz, 89dB, bi-wired. Dimensioni (LxAxP in mm): 215x1041x266. Altezza punte incluse.

ProAc has recently implemented the use of carbon fibre in the cones of the Response D40 and Carbon Pro 8, and Kevlar in the Tablette Anniversary and K6 models, thereby achieving levels of sound quality that were only dreamed of a few years ago. The necessary exhaustive research involved in the development of these models and the materials employed, has enabled us to design cones that give excellent frequency response characteristics and the new Response D30 is the latest model to take advantage of the acoustic excellence of carbon fibre. The Response D30 floorstander utilises a new polymer rear coated carbon fibre coned bass driver mounted in a slim enclosure. Bass loading is achieved by side vented directional loading similar to that used in the D40, producing an extremely accurate and powerful bass response with good extension and low colouration. The D30 is available in both ribbon and dome tweeter configurations and features the same high quality HF units found in the D40/D40R. The crossover network employs dedicated components of the highest quality and multi strand oxygen free copper wiring. The classic ProAc split crossover design offers bi-wiring and bi-amping options. The D30 therefore offers a similar bass loading, cone material, tweeter and crossover network to that of its larger sibling, making it an ideal choice for those who require a smaller floorstander, but still demand sonic excellence.Once set up using our own spikes, which are designed to penetrate even thick carpet and when partnered with quality electronics, the exceptional performance of the D30 can be fully realised. Offering clean powerful bass, an uncoloured, open midrange and a sweet, detailed high frequency response from either the ribbon or dome tweeter, the Stewart Tyler designed D30 offers a wonderfully natural and musical performance with pinpoint imagery that will appeal to audiophiles and music lovers all over the world.

ProAc RESPONCE D30R  Listino ufficiale   €. 3.835,00       Per ordine e sconto TELEFONA / E-MAIL

Diffusore bass reflex da pavimento a 2 vie, 10-200 watt, 8 ohm, 20hz-30khz, 89dB, bi-wired. Tweeter a nastro. Dimensioni (LxAxP in mm): 215x1041x266. Altezza punte incluse.

ProAc has recently implemented the use of carbon fibre in the cones of the Response D40 and Carbon Pro 8, and Kevlar in the Tablette Anniversary and K6 models, thereby achieving levels of sound quality that were only dreamed of a few years ago. The necessary exhaustive research involved in the development of these models and the materials employed, has enabled us to design cones that give excellent frequency response characteristics and the new Response D30 is the latest model to take advantage of the acoustic excellence of carbon fibre. The Response D30 floorstander utilises a new polymer rear coated carbon fibre coned bass driver mounted in a slim enclosure. Bass loading is achieved by side vented directional loading similar to that used in the D40, producing an extremely accurate and powerful bass response with good extension and low colouration. The D30 is available in both ribbon and dome tweeter configurations and features the same high quality HF units found in the D40/D40R. The crossover network employs dedicated components of the highest quality and multi strand oxygen free copper wiring. The classic ProAc split crossover design offers bi-wiring and bi-amping options. The D30 therefore offers a similar bass loading, cone material, tweeter and crossover network to that of its larger sibling, making it an ideal choice for those who require a smaller floorstander, but still demand sonic excellence.Once set up using our own spikes, which are designed to penetrate even thick carpet and when partnered with quality electronics, the exceptional performance of the D30 can be fully realised. Offering clean powerful bass, an uncoloured, open midrange and a sweet, detailed high frequency response from either the ribbon or dome tweeter, the Stewart Tyler designed D30 offers a wonderfully natural and musical performance with pinpoint imagery that will appeal to audiophiles and music lovers all over the world.                                                           

ProAc RESPONCE D48     Listino ufficiale      €.  5.175,00           Per ordine e sconto TELEFONA / E-MAIL

Response D 48 - Diffusore bass reflex da pavimento a 2 vie, 10-250 watt, 8 ohm, 20hz-30khz, 90db, bi-wired. Dimensioni (LxAxP): 212x1.200x349 mm (punte incluse). Peso: 39 kg.

After a year in research and development the D48 is now ready for production. Areas of improvement have been mid-range detail and a cleaner, faster and more extended bass response. A new studio monitor quality bass driver was designed for the D48. It features a special impregnated cone and mid frequencies are tuned by a cap of greater size than standard. This gives the new unit greater mid-range detail along with excellent bass control giving a tighter and more extended response. The two new bass drivers are each loaded through our special floor loading with side vents, this makes the loudspeaker easier to sight and reacts less to surroundings. The two bass units are then seamlessly mated to our ribbon or dome tweeter depending on your preference. With such a large slim floor standing design the sound stage is superb being very large and with pinpoint imagery. Another achievement for the D48 is its ability to create large orchestral works as well as heavy rock music. The D48 has a high quality filter network designed by Stewart Tyler comprising of the finest components, ProAc cable on a special board. The filter is also split for bi-amping and bi-wiring. This is one of the best designs from ProAc and should please all audio files regardless of their taste in music. Specifications Nominal Impedance 4 ohms Recommended Amplifiers10 to 250 Watts Frequency Response 20Hz to 30Khz Sensitivity 90 dB linear for 1 Watt at 1 metre Bass/Midrange 2 x 6 1/2 inch (165mm) ProAc unit studio monitor design with special coating and dust cap tuning. Tweeter Tweeter D48R - ProAc ribbon 60mm x 10mm 'light as a human hair' with rear chamber damping. Tweeter D48 - ProAc 1 inch (25 mm) soft dome with special surround and inner damping. Crossover  HQC using dedicated components wired throughout with ProAc multistrand oxygen-free copper cable. Split for optional bi-wiring/bi-ampingDimensions 47 1/4 inch (1200mm) high on plinths with spikes 8 1/3 inch (212mm) wide 13 1/2 inch (340mm) deep Weight86 lbs (39 Kgs) eachMode Floor standing Grille Acoustically transparent crimplene Finish Standard Finishes: Black Ash, Mahogany, Cherry, Maple. Premium Finishes: Rosewood, Ebony.

ProAc RESPONCE D48R   Listino ufficiale      €.  5.175,00             Per ordine e sconto TELEFONA / E-MAIL

Response D 48 Ribbon - Diffusore bass reflex da pavimento a 2 vie, 10-250 watt, 8 ohm, 20hz-30khz, 90db, bi-wired, tweeter a nastro. Dimensioni (LxAxP): 212x1.200x349 mm (punte incluse). Peso: 39 kg.

After a year in research and development the D48 is now ready for production. Areas of improvement have been mid-range detail and a cleaner, faster and more extended bass response. A new studio monitor quality bass driver was designed for the D48. It features a special impregnated cone and mid frequencies are tuned by a cap of greater size than standard. This gives the new unit greater mid-range detail along with excellent bass control giving a tighter and more extended response. The two new bass drivers are each loaded through our special floor loading with side vents, this makes the loudspeaker easier to sight and reacts less to surroundings. The two bass units are then seamlessly mated to our ribbon or dome tweeter depending on your preference. With such a large slim floor standing design the sound stage is superb being very large and with pinpoint imagery. Another achievement for the D48 is its ability to create large orchestral works as well as heavy rock music. The D48 has a high quality filter network designed by Stewart Tyler comprising of the finest components, ProAc cable on a special board. The filter is also split for bi-amping and bi-wiring. This is one of the best designs from ProAc and should please all audio files regardless of their taste in music. Specifications Nominal Impedance 4 ohms Recommended Amplifiers10 to 250 Watts Frequency Response 20Hz to 30Khz Sensitivity 90 dB linear for 1 Watt at 1 metre Bass/Midrange 2 x 6 1/2 inch (165mm) ProAc unit studio monitor design with special coating and dust cap tuning. Tweeter Tweeter D48R - ProAc ribbon 60mm x 10mm 'light as a human hair' with rear chamber damping. Tweeter D48 - ProAc 1 inch (25 mm) soft dome with special surround and inner damping. Crossover  HQC using dedicated components wired throughout with ProAc multistrand oxygen-free copper cable. Split for optional bi-wiring/bi-ampingDimensions 47 1/4 inch (1200mm) high on plinths with spikes 8 1/3 inch (212mm) wide 13 1/2 inch (340mm) deep Weight86 lbs (39 Kgs) eachMode Floor standing Grille Acoustically transparent crimplene Finish Standard Finishes: Black Ash, Mahogany, Cherry, Maple. Premium Finishes: Rosewood, Ebony.

 

ProAc CARBON  K6  Listino ufficiale      €.  10.762,00              Per ordine e sconto TELEFONA / E-MAIL

Diffusore bass reflex da pavimento a 3 vie,10-250 watt, 4 ohm, 25hz-30khz, 90dB, biwired. Dimensioni (LxAxP in mm): 125x1185x340. Altezza punte incluse.

ProAc is proud to announce the launch of the K6 loudspeaker. Following the successful incorporation of carbon fibre cone technology in the Carbon Pro Series, ProAc have been researching other materials for possible inclusion in their high end loudspeakers. The results of this research have come to fruition in the shape of the new K series which utilises cones manufactured from the material, Kevlar. Kevlar benefits from having similar properties to carbon fibre, being light and at the same time rigid. The ProAc 6 1/2" drivers utilised in the K6 feature Kevlar cones made by the same special method as our carbon fibre coned drive units; the cone is painstakingly produced from a mould by hand, a labour intensive process taking many hours to complete. Although Kevlar has proven to be an excellent cone material sonically, the Kevlar ProAc bass drivers require a different porting mechanism in order to realise their full potential. The bass is loaded by an almost invisible vent to produce a wonderfully weighty but exceptionally fast bass response. These drivers are seamlessly crossed over to a 2" dome midrange, the horn of which is manufactured from billet aluminium and for the high frequencies, ProAc's proven ribbon tweeter has been chosen. The cabinet on the K6 is a traditional mixture from ProAc of HDF materials of different thicknesses heavily damped with bitumen. Indeed the carcass including bitumen is 35mm thick. The combination of research into carbon fibre and its ingredients have produced a stunningly accurate and detailed loudspeaker, having an electrostatic or panel quality without the drawbacks. Sound is reproduced effortlessly with incredible detail and pinpoint imagery, which often can be muddled by conventional drive units.The K6 is designed for audiophiles and music lovers who are looking for a true high end loudspeaker offering smooth reproduction and an impressively flat response throughout the frequency range. The legendary ProAc qualities of large soundstaging and pin-sharp imaging capabilities complete a highly musical and engaging transducer. Specifications Nominal Impedance 4 ohms Recommended Amplifiers10 to 250 Watts Frequency Response 25hz to 30KhzSensitivity 90 dB linear for 1 watt at 1 metreBass Driver 2 x 6 1/2" (165mm) studio professional drive units with polymer impregnated Kevlar cones and Zinc basket Midrange Driver 2" (50mm) soft dome with 6061 Aluminium Alloy Front Plate Tweeter ProAc ribbon with diaphragm 'as light as a human hair' alnico magnet and rear chamber damping and 6061 Aluminium Alloy Front Plate Crossover Finest components on dedicated dual layer circuit board; ProAc multistrand oxygen-free copper cable throughout; Split for optional bi-wiring and bi-amping Dimensions 46" high (1185mm) with spikes and plinths, 8 1/2" (215mm) wide, 13 1/2" (340mm) deep Weight 97 lbs (44 Kgs) each Mode Floorstanding on spikesGrille Acoustically transparent crimplene Finish Standard Finishes: Black Ash, Mahogany, Cherry, Maple. Premium Finishes: Rosewood, Ebony.

ProAc CARBON  K8    Listino ufficiale    €.  23.138,00              Per ordine e sconto TELEFONA / E-MAIL

Diffusore bass reflex da pavimento a 3 vie, 10-500 watt, 4 ohm, 20hz-30khz, 91,5db, bi-wired, tweeter a nastro. Dimensioni (LxAxP): 240x1.230x450 mm (punte incluse). Peso: 70 kg.

Loudspeaker companies have toyed with the use of carbon fibre in loudspeakers, mainly for the use in cabinets. Carbon fibre coned drive units are rarely seen and used, we believe the type of carbon fibre and its preparation that we are using is unique.For the past year ProAc has been researching the use of pure carbon fibre due to its qualities and resonances in the manufacture of drive unit cones. Its incredible stiffness makes it ideal for a drive unit cone, and its piston like qualities are perfect for moving air at low frequencies without distortion. The new Carbon Pro Eight uses two carbon fibre coned bass drivers, a carbon fibre midrange horn and a carbon composite plinth.The carbon cone is unique with a pure polymer impregnated carbon weave and polished diaphragm, the back of the cone is then specially lacquered and finally it is concentrically weighted to add appropriate mass. The 3 inch midrange dome is repositioned in the unique pure polymer impregnated carbon weave and polished horn, and midrange sounds are reproduced with uncanny realism. High frequencies are covered by the ProAc ribbon tweeter with a diaphragm lighter than a human hair giving a sweet and detailed reproduction. With these attributes the cabinet size can be reduced greatly without losing the weight and slam of a much larger conventional loudspeaker. The cabinet on the Carbon Pro Eight is a traditional mixture from ProAc of HDF materials of different thicknesses heavily damped with bitumen. Indeed the carcass including Nominal Impedance  4 Ohms Recommended Amplifiers  10 to 500 Watts Frequency Response 20hz 30Khz Sensitivity 91.5db linear for 1 watt at 1 metre Bass Driver 2 x 8in (200 mm) studio professional drive units with pure polymer impregnated and polished carbon weave cone with rear lacquer and concentric weighting. Midrange Driver 3" (75 mm) soft dome with pure polymer impregnated carbon weave air coupling.  Tweeter  ProAc ribbon with diaphragm as light as a human hair alnico magnet and rear chamber damping. Crossover Finest components on dedicated circuit board. ProAc  multistrand oxygen-free copper cable throughout split for optional bi wiring and bi amping.  Dimensions 49.2" (1230 mm) high with spikes and plinths, 9.6" (240 mm) wide, 18" (450 mm) deep Weight  146.9 lb (68 kg) each unpacked  Mode  Floor standing with spikes  Grille  Acoustically transparent crimplene Finish High gloss lacquer finish options available on request

ProAc CARBON PRO 8   Listino ufficiale    €.23.137,00            Per ordine e sconto TELEFONA / E-MAIL

Carbon Pro 8 Diffusore bass reflex da pavimento a 3 vie, 10-500 watt, 4 ohm, 20hz-30khz, 88,5dB, biwired. Finitura lucida. Dimensioni (LxAxP in mm): 240x1230x450.Altezza punte incluse.

Loudspeaker companies have toyed with the use of carbon fibre in loudspeakers, mainly for the use in cabinets. Carbon fibre coned drive units are rarely seen and used, we believe the type of carbon fibre and its preparation that we are using is unique.For the past year ProAc has been researching the use of pure carbon fibre due to its qualities and resonances in the manufacture of drive unit cones. Its incredible stiffness makes it ideal for a drive unit cone, and its piston like qualities are perfect for moving air at low frequencies without distortion. The new Carbon Pro Eight uses two carbon fibre coned bass drivers, a carbon fibre midrange horn and a carbon composite plinth.The carbon cone is unique with a pure polymer impregnated carbon weave and polished diaphragm, the back of the cone is then specially lacquered and finally it is concentrically weighted to add appropriate mass. The 3 inch midrange dome is repositioned in the unique pure polymer impregnated carbon weave and polished horn, and midrange sounds are reproduced with uncanny realism. High frequencies are covered by the ProAc ribbon tweeter with a diaphragm lighter than a human hair giving a sweet and detailed reproduction. With these attributes the cabinet size can be reduced greatly without losing the weight and slam of a much larger conventional loudspeaker.The cabinet on the Carbon Pro Eight is a traditional mixture from ProAc of HDF materials of different thicknesses heavily damped with bitumen. Indeed the carcass including bitumen is 35 mm thick. The combination of research into carbon fibre and its ingredients have produced a stunningly accurate and detailed loudspeaker, having an electrostatic or panel quality without the drawbacks. Sound is reproduced effortlessly with incredible detail and pinpoint imagery, which often can be muddled by conventional drive units.We are sure at ProAc you will not see this type of drive unit in any other high-end loudspeaker and you will be amazed at such an open accurate and natural sound with a fast potent bass response. We urge those seeking the ultimate sound experience to audition the Carbon Pro Eight at a ProAc dealer near you.


CANALI CENTRALI

Telefona o invia un  e-mail per avere l'ultimo prezzo   0174 670100   Telefona o invia un  e-mail per avere l'ultimo prezzo 0174 670100  info@sinergy.us


 

ProAc CENTER VOICE          Listino ufficiale   €.  1.230,00      Per ordine e sconto TELEFONA / E-MAIL

Diffusore bassreflex canale centrale a 2 vie, 10-100 watt, 4 ohm, 88dB, bi- wired, magneti schermati. Dimensioni (LxAxP): 431,8x190,5x203,2 mm.

   

 

ProAc STUDIO CENTRE CHANNEL      Listino ufficiale   €.  1.200,00           Per ordine e sconto TELEFONA / E-MAIL

Diffusore bass reflex per canale centrale a 2 vie, 10-150 watt, 8 ohm, 35hz-30khz, 89dB, bi-wired, magneti schermati. Dimensioni (LxAxP in mm): 439x197x204. Disponibile in finitura ciliegio, frassino nero, mogano, acero, ebano.

For over a decade, the ProAc Response CC1 has been a firm favourite for use in all makes of home cinema systems. During the design of the CC1, great care was taken in matching crossover frequencies and balance, not only for ProAc loudspeakers, but also for compatibility with other manufacturers’ products.With the advent of higher dynamics, bandwidth and speech emanating from the centre, we decided to design a new centre channel which would effectively reproduce this extra information. The new Studio Centre Channel has taken two years to perfect. The cabinet is marginally bigger than the CC1 with two new bass drivers and is front ported as opposed to the rear ported design of the CC1. This allows for improved matching and placement, making the Studio Centre Channel a perfect match for the entire ProAc range. Careful crossover design has also meant that it is highly suitable for use with other makes of home cinema speakers, bringing an open and natural quality to centre channel reproduction.The Studio Centre makes an obvious partner for the Studio 110/130/140 models. A 5 inch version of the 61/2 inch bass driver used in the Studio range was designed using a special coated pulp cone and partnered with a new version of the Studio range tweeter, incorporating a shielded magnet system which will prevent interference with CRT monitors.Great emphasis was placed in the design process to produce a natural, open midrange with extra bandwidth for the music and sound effects reproduced by the centre channel. Efficiency and sensitivity have been improved over its predecessor and there is also greater bass extension and power.In summary, the ProAc Studio Centre Channel is a perfect match for our Studio and Response ranges or any good quality system where an excellent, compact centre channel is required.

ProAc RESPONCE  D MONITOR       Listino ufficiale   €.  2.860,00      Per ordine e sconto TELEFONA / E-MAIL

Response D Monitor Diffusore bassreflex canale centrale a 2  vie, 20-300 watt, 4 ohm, 25hz-30khz, 90dB, bi- wired, magneti schermati. Dimensioni (LxAxP in mm): 660x250x300.

Following the successful release of the ProAc Response D range we have designed and built a new high end studio monitor The new Response D Monitor is a radical new design delivering greater bandwidth, higher sensitivity with dynamic, yet smooth and open performance, and are available

ProAc RESPONCE  DR  MONITOR  Listino ufficiale   €.  2.860,00     Per ordine e sconto TELEFONA / E-MAIL

Response D Monitor Ribbon Diffusore bassreflex canale centrale a 2 vie, 20-300 watt, 4 ohm, 25hz-30khz, 90dB, bi- wired, magneti schermati. Tweeter a nastro. Dimensioni (LxAxP in mm): 660x250x300.  +345,00 euro per  ebano, acero a occhio di pavone.

Following the successful release of the ProAc Response D range we have designed and built a new high end studio monitor The new Response D Monitor is a radical new design delivering greater bandwidth, higher sensitivity with dynamic, yet smooth and open performance, and are available


SUBWOOFER

Telefona o invia un  e-mail per avere l'ultimo prezzo   0174 670100   Telefona o invia un  e-mail per avere l'ultimo prezzo 0174 670100  info@sinergy.us


ProAc RESPONCE  ER1  Listino ufficiale   €.  1.965,00               Per ordine e sconto TELEFONA / E-MAIL

Response ER 1 Subwoofer amplificato, 150 watt (200 di picco), 18hz-120hz (-6db a 18hz), woofer da 250mm in fibra di carbonio. Dimensioni: cubo 380mm, piedini 51mm. Peso: 20 kg.
Overview For ProAc, the development of a sub-woofer has only recently become a priority. In our opinion early designs blurred detail and imagery in stereo systems. We felt that it was only with the advent of the more compact active sub-woofers with their own electronics and filters that matching capability and sound quality were improved, but we still did not feel the need to produce our own unit. Lately however, particularly with the increasing popularity of home theatre and with the success of our own ProAc Home Theatre system (Studio 130/ 140 front, Studio 110 rear, and the Studio Centre channel) we decided that it would be desirable to develop a high quality sub-woofer which would be a credible addition to sophisticated audio systems. This first ProAc ER One (Equalised Reflex) subwoofer is an active unit with its own filters and internal amplification. Development has been a lengthy process. Our initial research indicated that drive unit cone material was a main contributing factor to sub-bass colouration. So a new carbon composite cone, developed a few years ago specifically for our Response and Future ranges, provided the perfect solution. Characterised by a clean and uncoloured bass output, this new material was developed into a ten-inch cone specifically for the ER One. It was immediately found to have the necessary rigidity and internal damping to produce a clean and natural sound, complementing the output of the main loudspeakers rather than detracting from it. The drive unit is mounted in a compact enclosure of high rigidity and thickness, with damped inner walls and loaded by our unique equalised reflex port, as developed for our Response and Future models. Naturally with the compatibility of the cone material and other design factors, this unit has proved to be especially successful with our own home theatre system, but extensive testing has also assured its effectiveness with other high quality home theatre and two-channel systems. The ER One is a true ProAc thoroughbred and immediately raises the game in sub-bass performance; for an extra octave of bass in a twochannel hi-fi system or explosive weight and authority in a home theatre system the ER One is the one to beat. Available in a variety of real wood veneers, this stunning new unit is available at your nearest ProAc dealer.Specifications Amplifier Power Output 150 watts to 200 peak Frequency Response 18hz to 120hz (minus 6db at 18hz) Cabinet Equalised reflex. Bass Driver 10" (250mm) carbon fibre composite on cast chassis with inner breather. Dimensions 15" (380mm) cube, 17" (431mm) high on feet Weight 44lbs (20kg) Mode Floorstanding Grille Acoustically transparent crimplene Finish Standard Finishes: Black Ash, Mahogany, Cherry, Maple.




Se su un prodotto presente o  non presente  nel nostro catalogo ci  puoi  richiedere  il  prezzo  scontato telefonando 0174 670100 - 0174 481045 o  inviando un e-mail a info@newaudio.it  ti  faremo  la   migliore  offerta .    Essendo   rivenditori ufficiali Italia  le  aziende  ci  chiedono  di  non creare  turbative  di  mercato pubblicando prezzi scontati non  di listino ufficiale .

Se hai trovato un prezzo più basso * in rete , segnalacelo e noi faremo di tutto per applicare quel prezzo. Altrimenti fai tu un'offerta e noi la valutateremo. La segnalazione può essere effettuata via email  oppure telefonando .  (*Per  prezzo più basso si riferisce ad offerte praticate sul Web da aziende che sono distributori  ufficiali  con sede in Italia , con regolare fatturazione e garanzia italiana fornita dal distributore ufficiale. Qualora il prezzo da confrontare fosse riferito a venditori esteri o che non offrono le caratteristiche suddette, queste non verranno prese in considerazione.)



Legenda istruzioni

Clicca per qui per vedere :  FOTO PRODOTTO

Clicca per qui per vedere :  ISTRUZIONI PRODOTTO

Clicca per qui per vedere :  CATALOGO,PROVA RIVISTE SPECIALIZZATE PRODOTTO


Telefona o invia un  e-mail per avere l'ultimo prezzo   0174 670100   Telefona o invia un  e-mail per avere l'ultimo prezzo 0174 670100  info@sinergy.us


Attenzione 

Per ordinare o avere gli ultimi prezzi aggiornati telefona al  0174 670100 o invia un E-mail a  info@sinergy.us

info@newaudio.it

Il presente listino sostituisce ed annulla ogni precedente.I prezzi indicati si riferiscono  a singolo diffusore.
Le caratteristiche e i prezzi indicati possono variare senza preavviso telefonare o inviare un e-mail per ulteriori domande e conferme sui prezzi sopra riporta
ti. Prezzi franco nostro magazzino


Nota bene Tutti i marchi citati nel presente listino sono di proprietà e registrati alle rispettive Case Produttrici