Fonorivelatore a bobina
mobile, alto livello d'uscita, 2.5 mV, stilo ellittico, peso 6gr.
Offering
exceptional performance and musicality at an affordable price the latest
generation Blue Point No. 2 sets a new standard in its price class.Moving coil
design, high output, 2.5-mV, alloy cantilever, Blue Point-cut elliptical diamond
stylus, and standard 1/2" mounting. Cartridge Type MC Frequency Response
15Hz-35KHz Output Voltage/Channel 2.5mV Channel Separation 32dB Channel Balance
0.5dB Compliance (x10-6 cm/dyne) 15 Stylus Size/Shape .3x.7/Elliptical Load
Impedance 47k Ohms Tracking Force Range 1.6-2.0 grams Recommended Force
1.8 grams Cartridge Weight 6.3 grams
Fonorivelatore a bobina
mobile, alto livello d'uscita 2.5 mV, stilo ellittico, peso 9gr.
The
evolution of the ever-popular Blue Point Special, the EVO III raises the
performance bar even higher at this highly competitive price point. Its tonal
balance is remarkably smooth, exhibiting a fundamental richness and overall
warmth without sacrificing musical detail and resolution. Sound stage focus and
channel separation are exemplary, as is the cartridges’ ability to maintain a
coherent consistency that reproduces music as a perceptual whole.High-output
moving coil design with 2.5-mV output. Chemically coated aluminum cantilever
with 0.3mm x 0.7mm elliptical stylus. Ultra low-resonance open generator design.
Resonance controlled mounting system provides the lowest mechanical impedance.
Highly compatible with most modern tonearms. Cartridge Type MC
Frequency Response 12Hz-50KHz Output Voltage/Channel 2.5mV Channel Separation
35dB Channel Balance 0.5dB Compliance (x10-6 cm/dyne) 12 Stylus Size/Shape
.3x.7/Elliptical Load Impedance 47k Ohms Tracking Force Range
1.7-2.1 grams Recommended Force 2.0 grams Cartridge Weight 9.0 grams
Fonorivelatore a bobina
mobile, alto livello d'uscita 2,5 mV, stilo ellittico a bassa massa, cantilever
in boro, bassa impedenza meccanica, peso 7gr.
Designed
for exceedingly low noise levels, wide dynamic range and the highest possilbe
fidelity in its price class, Blackbird is destined to become an analog classic.
Each cartridge is assembled using time honored, labor intensive techniques, hand
calibrated and critically auditioned to meet the most rigorous standards of
consistancy. The main advantage of high output moving coil cartridges is the
elimination of any additional gain stages, resulting in an overall reduction of
the noise floor. With 2.5mV directly driving a standard 47k Ohm RIAA phono
stage, the best possible signal to noise ratio is realized. Nothing but music
emerges from your most treasured recordings.Cartridge Type High output MC
Stylus Type Low mass elliptical Cantilever Long grain Boron Dynamic
Compliance (x10-6 cm/dyne)12 Frequency Response 10Hz-50Khz Output Voltage/Channel
2.5mV Internal Impedance 135 Ohms Channel Separation 35dB @ 1kHz
Channel Balance 0.5dB @ 1kHz Tracking Force Range 1.8 2.2 grams
Cartridge Weight 9.6 grams Mounting System Standard 0.5” hole spaci
SUMIKO
Pearwood
cel.lll€.2.590,00
Per
prezzo
scontato
TELEFONA / E-MAIL
Fonorivelatore a bobina
mobile, basso livello d'uscita 0,5 mV, stilo ellittico, magnete in alnico,
edizione speciale a tiratura limitata con corpo in legno di pero, peso 7gr.
For
over five years SUMIKO has provided the Celebration Pearwood Signature to music
lovers seeking the musical experience of the finest and most expensive phono
pickups at a more reasonable cost. New advances in material technology and
construction techniques have allowed for a significant improvement in sound
quality and have resulted in the creation of this new Mark II
version.Improvements to the original Pearwood Celebration include a brand new
handcrafted Pearwood cartridge body, refined long-grain boron cantilever, and
most notably a new ultra low-mass Ogura Jewel Co. P9 Stylus (Vital Design). In
addition, a new, machined billet Teflon back plate features custom hollow and
tapered brass mounting pins for ease of installation. These refinements result
in a cartridge that offers more extended high frequencies along with bass
extension and an extremely articulate mid-band range. . The Pearwood Celebration
II embodies all the virtues that over 25 years of experience in designing and
distributing the finest in analog products. Cartridge Type Moving Coil
Suspension Synthetic Rubber Frequency Response 10Hz-40Khz +/- 1.5dB Output
Voltage/Channel 0.5mV (3.54 cm/sec., 1kHz) Channel Separation 30dB @ 1kHz
Channel Balance 0.5dB @ 1kHz Optimum Tracking Force 2.0 grams Tracking Force
Range 1.9 2.2 grams Dynamic Compliance (x10-6 cm/dyne)12 Internal Impedance 30
Ohms Capacitance Range 100 300 pf Cantilever Long grain Boron Stylus Size/Shape
Ultra low-mass Ogura Jewel Co. P9 Stylus Output Terminals Unique gold plated
tapered brass pins Load Impedance 100-1k Ohms Cartridge Weight 7.0 grams
Mounting System Standard 0.5” hole spacing, threaded M2.5
Fonorivelatore a bobina
mobile, basso livello d’uscita 0,5 mV, stilo line contact, magnete in alnico,
cantilever in boro, corpo in legno di palissandro brasiliano, peso 7gr.
Palo
Santos Presentation For over thirty-five years, SUMIKO has provided a
comprehensive range of phono cartridges to music lovers seeking the finest
musical experience at a variety of price points. In fact, the great market
success of SUMIKO phono cartridges has hinged on their phenomenal
cost-to-performance ratio.The Palo Santos Presentation is no exception. New
design requirements incorporating advances in material technology and
construction techniques have resulted in a significantly improved product which
delivers a highly refined and resolved, yet musically satisfying sound quality
previously unavailable at or even near its price.Improvements grace virtually
every facet of the product to differentiate it from its smaller sibling the
Pearwood Celebration II. Most significant is the new generator anchoring system,
which has substantially improved rigidity and reduced resonance and background
noise to previously unheard of levels. From the new handcrafted Palo Santos (Brazilian
Rosewood) body, which is shorter in height to add vision when mounting and
aligning this cartridge, to the Long Grain Boron cantilever and new Line Contact
stylus, which significantly improves resolution, the Palo Santos Presentation
truly deserves the title as our flagship offering. Cartridge Type Moving Coil
Suspension Synthetic Rubber Frequency Response 10Hz-40Khz +/- 1.5dB Output
Voltage/Channel 0.5mV (3.54 cm/sec.,1kHz) Channel Separation >30dB @ 1kHz
Channel Balance <0.5dB @ 1kHz Optimum Tracking Force 2.0 grams Tracking Force
Range 1.8 - 2.2 grams Dynamic Compliance 8 x 10-6 cm/dyne Internal Impedance 12
ohms Load Impedance 100-1k ohms Capacitance Range 100 - 300 pf Cantilever Long
grain Boron Stylus Line Contact, ultra low-mass, solid diamond 75µm x 5µm
Output Terminals Unique gold plated tapered brass pins Cartridge Weight
8.3 grams Mounting System Standard 0.5” hole spacing, threaded M2.5
Supplied Hardware Stainless Steel Mounting Bolts 2 ea. – 2.5mm x 6mm, 8mm
4 – Stainless Steel Washers, 2.5mm 1 – M2 Allen Wrench
Legenda istruzioni
Clicca
per qui per vedere : FOTO PRODOTTO
Clicca
per qui per vedere : ISTRUZIONI PRODOTTO
Clicca
per qui per vedere : CATALOGO,PROVA RIVISTE SPECIALIZZATE PRODOTTO
Clicca
per qui per vedere : DATI TECNICI SPECIFICHE
PRODOTTO
Attenzione
Per ordinare o avere
gli ultimi prezzi aggiornati telefona al
0174 670100
o invia un E-mail a info@sinergy.us
Il presente listino
sostituisce ed annulla ogni precedente.I prezzi indicati si
riferiscono a singolo diffussore.
Le caratteristiche e i prezzi indicati possono variare senza
preavviso telefonare o inviare un e-mail per ulteriori domande e
conferme sui prezzi sopra riportati.
Prezzi
franco nostro magazzino.
Tutti i marchi citati nel presente listino sono di proprietŕ e
registrati alle rispettive Case Produttrici
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
Moving
magnet phono cartridge with alloy cantilever. Bonded spherical stylus, 4.0 mV
output.
Clicca
per qui per vedere : FOTO PRODOTTO
Clicca
per qui per vedere : DATI TECNICI SPECIFICHE
PRODOTTO