HIFI  TV  VIDEO DIFFUSORI  PROIETTORI  SAT  POLTRONE   DIVANI   ARREDO SONORIZZAZIONI AMBIENTI  HIFI  TV  VIDEO DIFFUSORI  PROIETTORI  SAT  POLTRONE   DIVANI   POLTRONE UFFICIO  ARREDO SONORIZZAZIONI AMBIENTI 

 


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


THORENS  TD 158                                     Listino  ufficiale   €.   420,00 Promozione  Telefona

THORENS TD 158 GIRADISCHI A TELAIO RIGIDO CON BRACCIO - TRAZIONE A CINGHIA - CONTROLLO ELETTRONICO DELLA VELOCITA` 33/45 - AUTOSTOP - TESTINA ORTOFON OMB10 IN DOTAZIONE - FINITURA BLACK ALTEZZA (IN MM) 115  LARGHEZZA (IN MM) 440  PROFONDITA' (IN MM) 360 PESO (IN KG) 0.4

The TD 158 is a complete and comfortable record player. Plug-and-play, so to speak. It goes without saying that it features a fully automatic mode of operation, an electronic speed selector and last but not least, a high-quality acrylic cover to keep dust away.Tonearm and cartridge have been pre-mounted and painstakingly adjusted in the factory. All necessary leads are supplied with the unit and the record player is ready to play with a flick of the wrist. The entry into the wonderful world of analog music is as simple as this!

 

THORENS  TD 170                  Listino  ufficiale   €.   600,00 Promozione  Telefona

THORENS TD 170 GIRADISCHI CON BRACCIO TP 19 - TRAZIONE A CINGHIA - CONTROLLO ELETTRONICO DELLA VELOCITA` 33/45/78 - AUTOSTOP - TESTINA ORTOFON OMB10 IN DOTAZIONE - FINITURA BLACK ALTEZZA (IN MM) 115 LARGHEZZA (IN MM) 440 PROFONDITA' (IN MM) 360 PESO (IN KG) 0.4

The well crafted, fully automatic TD 170-1 comes equipped with three speeds so it can also play shellac records at 78 rpm (the special stylus/cartridge required is available separately). Owing to its truly easy operation, you can start playing your records right away without having to waste time with finicky alignment work. The fun with analogue music starts here

THORENS  TD 190-2            Listino  ufficiale   €.   700,00 Promozione  Telefona

THORENS TD 190  GIRADISCHI CON BRACCIO TP 19 - TRAZIONE A CINGHIA - CONTROLLO ELETTRONICO DELLA VELOCITA` 33/45/78 - AUTOSTOP - TESTINA ORTOFON OMB10 IN DOTAZIONE - FINITURA BLACK ALTEZZA (IN MM) 119  LARGHEZZA (IN MM) 440  PROFONDITA' (IN MM) 360  PESO (IN KG) 0.6

The TD 190-1 is the big brother of the TD 170-1. Plinth and platter have more mass, which in combination with the electronically controlled DC motor enhances the silent running as well as the sound. It therefore doesn’t matter if you prefer the delicate sound of a violin or rather some powerful guitar riffs.

THORENS  TD 235                                              Listino  ufficiale   €.   900,00 Promozione  Telefona

THORENS TD235 GIRADISCHI A TELAIO RIGIDO semi automatico - stop a fine corsa con lettura opto elettronica - BASE A SMORZAMENTO CONTROLLATO - PIATTO IN ALLUMINIO - BRACCIO DRITTO Thorens TD 19-1 - CONTROLLO ELETTRONICO DELLA VELOCITA` 33/45 - capacità del cavo 160 Pf - FINITURA nero - TESTINA IN DOTAZIONE AT 95E - Dimensioni 410 x 130 x 340 (L x A x P) - peso 6.7 KG-versione  ev + 110,00 euro
THORENS TD235  Semi-Automatic  The TD 235 is the manual counterpart of the TD 240-2. The TD 235 features a opto-electronical shut-off and an extremely silent running precision belt drive beneath the platter. It has been equipped with the new Thorens TP 19-1 tonearm. Features • Manual operation • Opto-electronical shut-off • Internal flat drive belt • Electronically controlled DC motor • Precision tonearm TP 19-1 • Solid wooden plinth The TD 235 is also available with integrated phono pre-amplifier (TD 235 phono).

THORENS  TD 201                   Listino  ufficiale   €.    650,00 Promozione  Telefona

Giradischi manuale a telaio rigido con trazione a cinghia - preamplificatore phono mm incorporato con facolta` di impostare l'uscita del segnale dai connettori rca a livello "line" o "phono" mediante selettore - braccio tp 71 con headshell portatestina rimovibile e testina mm audio-technica at3600 in dotazione - velocita` d rotazione 33 e 45 rpm - motore in dc - controllo dell'anti-skating - piatto in alluminio pressofuso - tappetino smorzante in gomma - cappa parapolvere in dotazione - finitura high gloss black (nero laccato)o high gloss white(bianco laccato )- dimensioni (l x a x p) 420 x 121 x 355 mm

The new Thorens TD 201 is the right choice for anyone looking for a robust, easy to use plug and play turntable. It comes with a smooth running belt drive and a aluminium platter with rubber mat. The new Thorens TP 71 tonearm uses a detachable headshell with preconfigured AT 3600 cartridge.SPECIAL FEATURES Using the switchable integrated phono stage the TD 201 can be connected to any amplifier or receiver even if it does not have a specific input for phono devices.

THORENS  TD 202                        Listino  ufficiale   €.    880,00 Promozione  Telefona

thorens td 202 giradischi manuale a telaio rigido rinforzato con trazione a cinghia - preamplificatore phono mm incorporato con facolta` di impostare l'uscita del segnale dai connettori rca a livello "line" o "phono" mediante selettore - convertitore analogico/digitale con uscita usb per digitalizzare su computer i propri lp in vinile - braccio tp 71 con headshell portatestina rimovibile e testina mm audio-technica at95e in dotazione - velocita` d rotazione 33 e 45 rpm - motore in dc - controllo dell'anti-skating - piatto in alluminio pressofuso - tappetino smorzante in gomma - cappa parapolvere in dotazione - finitura high gloss black (nero laccato) - dimensioni (l x a x p) 420 x 121 x 355 mm

New TD 202 completes the new series of manual plug and play turntables. Compared with its “smaller” brother TD 201 it comes with a more massive plinth and a AT 95E cartridge. The integrated phono stage includes an additional analogue/digital converter with USB out. So the record played will be automatically digitized and can easily be recorded on a computer using several kinds of recording software that can be downloaded from the web

THORENS  TD 203                                     Listino  ufficiale   €.  1.100,00    Promozione  Telefona

GIRADISCHI A TELAIO RIGIDO MANUALE - TRAZIONE A CINGHIA - VELOCITA` 33 E 45 RPM CON CONTROLLO ELETTRONICO - MOTORE IN DC - PIEDINI CON DISACCOPPIATORI INCORPORATI - PIATTO IN ABS - BRACCIO UNIPIVOT TP82 REGOLABILE - ANTI-SKATING A PESO - TESTINA MM TAS 257 E DUST COVER IN DOTAZIONE - FINITURA NERO LACCATO,ROSSO, BIANCO - DIMENSIONI 400 X 92,6 X 320 - PESO 3,35 KG.

THORENS  TD 240              Listino  ufficiale   €.  1.200,00   Promozione  Telefona


T
HORENS TD 240 MKII  GIRADISCHI CON BRACCIO TP 19-1 - COMPLETAMENTE AUTOMATICO - TRAZIONE A CINGHIA PIATTA - TELAIO SEMI FLOTTANTE - CONTROLLO ELETTRONICO DELLA VELOCITA` - VELOCITA` SELEZIONABILI 33/45/78 - ALIMENTATORE ESTERNO -TESTINA THORENS TAS 267 E DUST COVER IN DOTAZIONE - FINITURA NOCE
VERSIONE  FINITURA NERO LACCATO 1.050,00 euro

High-quality materials, a classic design and love for details are the distinctive characteristics of this fully automatic record player. The massive and stable real wood plinth, which is available also with piano lacquer finish, provides the TD 240 with a timeless elegance.This record player has been equipped with the TP 21 tonearm and an extremely silent running precision belt drive beneath the platter, so that the other technical qualities are also most evident. Set-up and connections are effortlessly carried out so that the TD 240 is ready to play within minutes. Lovers of shellac (78) records will certainly welcome the three speeds.*

THORENS  TD 402                                                 Listino  ufficiale  €.  1.200,00  Promozione  Telefona

Thorens td 402 dd  Giradischi con motore a trazione diretta ultra silenzioso - funzione di avvio e arresto automatico - stadio phono mm incorporato - selettore per impostare l'uscita del segnale a livello linea o phono - braccio tp 72 con canna in fibra di carbonio e headshell portatestina rimovibile - testina at-vm95e pre-installata - cappa parapolvere in dotazione - finitura high gloss black (nero laccato) Oppure  high gloss walnut (noce laccato)
The Thorens TD 402 DD comes as out of the box solution for easy use. It has got a very silent, innovative direct drive motor in combination with an integrated phono pre amp and auto start and auto stop function.
Far from simple entry level standard Thorens TD 402 DD uses state of the art technology together with ease of use and perfect soundThe new tonearm Thorens TP 72 uses a carbon tube, the pre installed cartridge AT VM95 E is mounted in a detachable headshell. The integrated phono preamp can be switched off if necessary. An acrylic dust cover and a power supply are included. Thorens TD 402 DD comes as best buy in its price range. Special Features •Stable and super silent direct drive •Auto Start and Auto Stop •Switchable integrated phono pre amp •Carbon tonearm •Detachable headshell •Pre installed cartridge AT VM95 E

THORENS  TD 295 MKIV              Listino  ufficiale   €.  1.200,00  Promozione  Telefona

    

Giradischi a telaio rigido – base a smorzamento controllato – piatto in alluminio – braccio dritto TD 42 - controllo elettronico della velocità 33/45 – autostop – finitura piano black ,Mogano ,– testina in dotazione AT 95E

TD 295 MK IVAn elegant classicIn the TD 295 MK IV, technical finesse and first-rate sound go hand in hand with elegant appearance. It is based on tried and tested components, which are complemented by the new TP 41 tonearm. The warm wooden colours of the plinth may be freely combined with either classic or contemporary furniture styles in order to have this record player stand out in any room. Indeed an elegant classic at its best.

THORENS  TD 206                Listino  ufficiale   €.  1.500,00  Promozione  Telefona

 
T
HORENS TD 206   GIRADISCHI A TELAIO RIGIDO MANUALE – PIEDINI SMORZATI CON REGOLAZIONE DELL’ALTEZZA EFFETTUABILE DAL PIANO SUPERIORE DEL TELAIO - PIATTO IN ALLUMINIO - BRACCIO DRITTO TP90 CON REGOLAZIONE DI VTA E OVERHANG – MASSA EGGETTIVA DEL BRACCIO 11 G - MOTORE SERVOCONTROLLATO IN DC - 33/45 RPM CON REGOLAZIONE A TRIMMER +/- 5% - TESTINA THORENS TAS 267 E DUST COVER IN DOTAZIONE - FINITURA LACCA NERA, ROSSO, BIANCO. – DIMENSIONI 475 X 125 X 370 – PESO 5,6 KG

THORENS  TD 209                                          Listino  ufficiale   €.  1.500,00  Promozione  Telefona

   
THORENS TD 309 TRI-BALANCE-BLACK GLOSS   CODICE 0101122   GIRADISCHI ANALOGICO CON TRAZIONE A CINGHIA – BASATO SU DI UNA INNOVATIVA CONCEZIONE DI SOSPENSIONI FLOTTANTI INTEGRATE NELLE COLONNE DI SOSTEGNO – PIATTO BILANCIATO DINAMICAMENTE IN VETRO CON CONTRO PIATTO DI ALLUMINIO – MOTORE IN CORRENTE ALTERNATA A BASSO RUMORE DISACCOPPIATO E CONTROLLATO ELETTRONICAMENTE – TENSIONE DELLA CINGHIA VARIABILE – VELOCITA` SELEZIONABILI 33.33 E 45 RPM - BRACCIO A MASSA MEDIA TP92 CON CUSCINETTI A SFERA A BASSISSIMA TOLLERANZA – AZIMUTH E OVERANG REGOLABILI - TESTINA THORENS TAS 267 IN DOTAZIONE - USCITA ANALOGICA CON CONNETTORI RCA - DUST COVER OPZIONALE - FINITURA VERNICE LACCATA NERA ,ROSSO,BIANCO.

THORENS  TD 309                                  Listino  ufficiale  €.  1.950,00  Promozione  Telefona

Giradischi analogico con trazione a cinghia – basato su di una innovativa concezione di sospensioni flottanti integrate nelle colonne di sostegno – piatto bilanciato dinamicamente in vetro con contro piatto di alluminio – motore in corrente alternata a basso rumore disaccoppiato e controllato elettronicamente – tensione della cinghia variabile – velocità selezionabili 33.33 e 45 RPM - braccio a massa media TP92 con cuscinetti a sfera a bassissima tolleranza – azimuth e overang regolabili - uscita analogica con connettori RCA - finitura vernice semilucida nera-finitura vernice semilucida rossa-finitura vernice laccata bianca-finitura vernice laccata nero- finitura vernice laccata rossa

The TD 309 sets new standards in analogue replay. The turntable's innovative three-point-suspension (Tri-Balance) ensures perfect balance in both mechanical and aesthetic terms. Form and function work in harmony to make the TD 309 a turntable that is guaranteed to reveal the magic of analogue replay  The TP 92 tonearm, which was specially designed for Thorens turntables, uses an ultra-low-friction bearing and an innovative magnetic anti-bias system with zero stiction. The arm tube is made from rolled aluminium that is damped using RMR (Reduced Modal Resonance) technology. The brass counterweight at the end of the arm tube is double-decoupled, and the tonearm is so designed that its centre of gravity is level with the stylus. Features • New innovative Tri-Balance suspended sub chassis turntable • New suspension system to make setting up easy • Low Noise, Low Voltage electronically speed controlled DC Motor • Adjustable belt tension for best performance • Aluminium sub platter with single line contact • Fused silica platter for consistency and sound quality• New low resonance TP 92 arm with precision Japanese bearings • Arm adjustable for azimuth and overhang

THORENS  TD 148                                                   Listino  ufficiale   €. 2.100,00  Promozione  Telefona

Thorens td 148a  giradischi a cinghia con telaio sospeso flottante completamente automatico - facolta` di utilizzo in modalita` manuale - velocita` di rotazione 33, 45 e 78 rpm - piatto in vetro con precise guide di allineamento al sottopiatto - braccio dedicato a risonanza ottimizzata con progettazione derivata dal modello top di gamma tp 92 - testina tas 267 (at-95e) pre-installata - cappa parapolvere in dotazione - finitura high gloss black (nero laccato) Oppure   finitura high gloss walnut (noce laccato)  - dimensioni (l x a x p) 440 x 119 x 360 mm
 

 The top of Thorens full automatic turntables The Thorens TD 148A sets the standard for high level full automatic turntables in the market in technology and design. A high quality plinth, a precise glass platter and the new tonearm which is derived from our High End TP 92 prove this. TD 148 A  Additionally there is still the classical belt drive, the very quiet running DC motor and a suspended “floating” chassis. 78 rpm are available for playing old shellac records. Instead of a fixed cable a pair of RCA Jacks allow usage of any cable you like for connecting the TD 148A to the amp. Thorens TAS 267 cartridge is preinstalled. Special Features •Fully automatic turntable •Three speed design: 33,3/ 45/ 78 rpm •Polished precision belt •„floating“ Chassis m•Glass platter with exact guide •Optimized tonearm m•Cartridge TAS 267 preinstalled
 

THORENS  TD 350-TP92                   Listino  ufficiale   €.  5.200,00

 

THORENS TD 350-250 ROSEWOOD GIRADISCHI A TELAIO FLOTTANTE - ALIMENTATORE PS800 INTEGRATO - PIATTO IN ALLUMINIO SMORZATO (4,2 KG) - BRACCIO DRITTO TP 250 CON VTA E ANTI-SKATING MAGNETICO - CONTROLLO ELETTRONICO DELLA VELOCITA` 33/45 RPM ALTEZZA (IN MM) 160  LARGHEZZA (IN MM) 440  PROFONDITA' (IN MM) 345  PESO (IN KG) 10 colori  rosenwood  e   nero

The TD 350 revives the legendary Thorens tradition and concept of the suspended chassis. The construction of the TD 350 ingeniously combines the advantages of a mass platform with those of the suspended chassis. This tried and tested concept as well as traditional manufacturing quality make the TD 350 a record player that will satisfy even the most discerning demands. Experience the renaissance of an outstanding technology being employed again in combination with the latest engineering knowledge and high-tech materials.The TD 350 is equipped with the proprietary Thorens IDD (Independent Double Damping) suspension system, which yields an independent dampening of horizontal and vertical oscillations. Together with the 4-kg-platter and low-friction bearing this results in incredible silent running and exceptional sonic stability. The integrated motor control circuitry takes care of highly precise rpm by means of electronic stabilization. Additional features, such as the precision-ground belt, a solid turned platter combined with a layer of bitumen, the absolutely silent AC synchronous motor and, last but not least, the fine TP 250 tonearm further enhance the outstanding sound quality of the TD 350.

 

THORENS  TD 2015 BC                                                                        Listino  ufficiale   €.  4.100,00

 

Giradischi analogico – telaio rigido ad alto spessore con frontale curvo – piedini in metallo regolabili – piatto in metallo ad elevata inerzia e smorzamento – motore meccanicamente disaccoppiato – foro per Braccio a richiesta – velocità di rotazione 33/45 giri alimentazione separata -colore trasparente- caratteristiche preliminari-

 VERSIONE THORENS TD 2015/TP 92 CLEAR 5.000,00 euro GIRADISCHI ANALOGICO - TELAIO RIGIDO AD ALTO SPESSORE CON FRONTALE CURVO - PIEDINI IN METALLO REGOLABILI - PIATTO IN METALLO AD ELEVATA INERZIA E SMORZAMENTO - MOTORE MECCANICAMENTE DISACCOPPIATO - BRACCIO TP 92 - VELOCITA` DI ROTAZIONE 33/45 GIRI ALIMENTAZIONE SEPARATA - COLORE TRASPARENTE - CARATTERISTICHE PRELIMINARI

THE NEW ACRYLIC SERIES  The new Acrylic-Series is stunning - not only from a visual point of view. Thanks to elaborate control circuitry, an extremely stable acrylic plinth and a heavy aluminium platter, the turntables are made to sound as exciting as they look. THORENS TD 2015| Transparent The external motor unit of the Thorens Acrylic-Series was constructed in a way that there is no mechanical contact to the plinth, thus avoiding transfer of vibration. In addition, the entire turntable rests on special feet which effectively dampen all kinds of air-born or footfall vibrations and eventually ensure a continuous, undisturbed run of the platter. The TP 92 tonearm, which was specially designed for Thorens turntables, uses an ultra-low-friction bearing and an innovative magnetic anti-bias system with zero stiction. The arm tube is made from rolled aluminium that is damped using RMR (Reduced Modal Resonance) technology. The brass counterweight at the end of the arm tube is double-decoupled, and the tonearm is so designed that its centre of gravity is level with the stylus. TD 2015: 25 mm acrylic plinth, 3.7 kg platter New TP 92 tonearm New design of the chassis New exciting colours (TD 2035) SME M2-9 or 309 tonearm available (option)

THORENS  TD 2035 BC                                                                        Listino  ufficiale   €.  6.800,00

 GIRADISCHI ANALOGICO - TELAIO RIGIDO A TRE STRATI IN ACRILICO - PIEDINI IN METALLO REGOLABILI - PIATTO IN METALLO AD ELEVATA INERZIA E SMORZAMENTO - MOTORE MECCANICAMENTE DISACCOPPIATO - BRACCIO TP 92 - VELOCITA` DI ROTAZIONE 33/45 GIRI ALIMENTAZIONE SEPARATA -I Colori  rosso,nero,trasparente,blu

THE NEW ACRYLIC SERIES  The new Acrylic-Series is stunning - not only from a visual point of view. Thanks to elaborate control circuitry, an extremely stable acrylic plinth and a heavy aluminium platter, the turntables are made to sound as exciting as they look. THORENS TD 2015| Transparent The external motor unit of the Thorens Acrylic-Series was constructed in a way that there is no mechanical contact to the plinth, thus avoiding transfer of vibration. In addition, the entire turntable rests on special feet which effectively dampen all kinds of air-born or footfall vibrations and eventually ensure a continuous, undisturbed run of the platter. The TP 92 tonearm, which was specially designed for Thorens turntables, uses an ultra-low-friction bearing and an innovative magnetic anti-bias system with zero stiction. The arm tube is made from rolled aluminium that is damped using RMR (Reduced Modal Resonance) technology. The brass counterweight at the end of the arm tube is double-decoupled, and the tonearm is so designed that its centre of gravity is level with the stylus. TD 2015: 25 mm acrylic plinth, 3.7 kg platter New TP 92 tonearm New design of the chassis New exciting colours (TD 2035) SME M2-9 or 309 tonearm available (option)

THORENS  TD 903-TP92/9                Listino  ufficiale   €.  8.500,00

THORENS TD 903 - TP 92/9   GIRADISCHI DI RIFERIMENTO A CONTROTELAIO FLOTTANTE CON TRAZIONE A CINGHIA - BRACCIO TP 92 DA 9 POLLICI - CONTROTELAIO IN TRICOM, COMPOSITO DI ALLUMINIO/POM CARATTERIZZATO DA ECCELLENTI PROPRIETA` DI SMORZAMENTO E ALTA RIGIDITA` - SOSPENSIONE MEDIANTE 3 MOLLE CONICHE REGOLABILI DALL'ALTO - SMORZAMENTO MEDIANTE STRATO DI VISCO/POLIPROPILENE NEL SISTEMA A MOLLE - PIATTO IN CRISTALLO DI QUARZO SMERIGLIATO - SOTTOPIATTO IN ALLUMINIO - MOTORE AC ASINCRONO MONTATO DIRETTAMENTE SUL CONTROTELAIO - PIEDI REGOLABILI - USCITE STEREOFONICHE SBILANCIATE RCA - CAPPA PARAPOLVERE IN DOTAZIONE - FINITURA ANTHRACITE,BIANCO,ZEBRANO  - DIMENSIONI (L X A X P) 470 X 140 X 380 MM - PESO 10 KG

  THE ULTIMATE SUB-CHASSIS TURNTABLE TRADITION REINTERPRETED The sub-chassis is made of triCom, an aluminium/POM composite characterized by excellent damping properties and high stiffness. Its weight has been optimized for high performance. To reduce vibrations, the synchronous AC motor is mounted directly onto the damped sub-chassis. It drives the sub-platter via a machined precision belt.The sub-chassis is suspended by means of three conical springs which can be adjusted from above in order to achieve uniform tension. The bearing is made of sintered bronze with a Teflon thrust pad and optimized for smooth running. The steel axle supported therein provides very low, constant friction and thus presents a uniform load to the motor. Two of the turntable’s three feet can be levelled from above, which facilitates setup. Depending on the model, different damping architectures, tonearm boards and platters are used. The design can accommodate a wide variety of 9" and 10" tonearms also from third-party manufacturers. SPECIAL FEATURES Newly developed, ten-step adjustable pneumatic damping architecture A conical polypropylene membrane under the platter bearing is decoupled from the triCom base via a visco/propylene layer. The air chamber thus formed under the membrane vents into ten apertures in the base plate which can be opened or closed with a slide.Turntable feet with triCom and viscose foam insert, adjustable The tonearm board is also made of triCom and can be cut for almost any 9" and 10" tonearm at the factory. Three-part platter The polished aluminium platter features an acrylic insert that acts as a damping pad for the grooved area of the record. Tonearm connection options Standard: mini 5-pin DIN soldered to RCA/XLR Option: soldered directly to RCA/XLR terminals

 

THORENS  TD 905-TP92/9             Listino  ufficiale   €.  10.500,00

THORENS TD 905 - TP 92/9  GIRADISCHI DI RIFERIMENTO A CONTROTELAIO FLOTTANTE CON TRAZIONE A CINGHIA - BRACCIO TP 92 DA 9 POLLICI - CONTROTELAIO E BASETTA DEL BRACCIO IN TRICOM, COMPOSITO DI ALLUMINIO/POM CARATTERIZZATO DA ECCELLENTI PROPRIETA` DI SMORZAMENTO E ALTA RIGIDITA` - SOSPENSIONE MEDIANTE 3 MOLLE CONICHE REGOLABILI DALL'ALTO - SISTEMA DI SMORZAMENTO MEDIANTE STRATO DI VISCO/POLIPROPILENE TRA CUSCINETTO DEL PIATTO E BASE - PIATTO IN CRISTALLO DI QUARZO SMERIGLIATO - SOTTOPIATTO IN ALLUMINIO - MOTORE AC ASINCRONO MONTATO DIRETTAMENTE SUL CONTROTELAIO - PIEDI REGOLABILI - USCITE STEREOFONICHE BILANCIATE XLR E SBILANCIATE RCA - CAPPA PARAPOLVERE IN DOTAZIONE -FINITURA ANTHRACITE,BIANCO,ZEBRANO - DIMENSIONI (L X A X P) 470 X 140 X 380 MM - PESO 11 KG

  THE ULTIMATE SUB-CHASSIS TURNTABLE TRADITION REINTERPRETED The sub-chassis is made of triCom, an aluminium/POM composite characterized by excellent damping properties and high stiffness. Its weight has been optimized for high performance. To reduce vibrations, the synchronous AC motor is mounted directly onto the damped sub-chassis. It drives the sub-platter via a machined precision belt.The sub-chassis is suspended by means of three conical springs which can be adjusted from above in order to achieve uniform tension. The bearing is made of sintered bronze with a Teflon thrust pad and optimized for smooth running. The steel axle supported therein provides very low, constant friction and thus presents a uniform load to the motor. Two of the turntable’s three feet can be levelled from above, which facilitates setup. Depending on the model, different damping architectures, tonearm boards and platters are used. The design can accommodate a wide variety of 9" and 10" tonearms also from third-party manufacturers. SPECIAL FEATURES Newly developed, ten-step adjustable pneumatic damping architecture A conical polypropylene membrane under the platter bearing is decoupled from the triCom base via a visco/propylene layer. The air chamber thus formed under the membrane vents into ten apertures in the base plate which can be opened or closed with a slide.Turntable feet with triCom and viscose foam insert, adjustable The tonearm board is also made of triCom and can be cut for almost any 9" and 10" tonearm at the factory. Three-part platter The polished aluminium platter features an acrylic insert that acts as a damping pad for the grooved area of the record. Tonearm connection options Standard: mini 5-pin DIN soldered to RCA/XLR Option: soldered directly to RCA/XLR terminals

THORENS  TD 907-TP92/10           Listino  ufficiale   €.  14.900,00

THORENS TD 907 - TP 92/10  GIRADISCHI DI RIFERIMENTO A CONTROTELAIO FLOTTANTE CON TRAZIONE A CINGHIA - BRACCIO TP 92 DA 10 POLLICI - CONTROTELAIO E BASETTA DEL BRACCIO IN TRICOM, COMPOSITO DI ALLUMINIO/POM CARATTERIZZATO DA ECCELLENTI PROPRIETA` DI SMORZAMENTO E ALTA RIGIDITA` - SOSPENSIONE MEDIANTE 3 MOLLE CONICHE REGOLABILI DALL'ALTO - SISTEMA DI SMORZAMENTO PNEUMATICO PROPRIETARIO, CON 10 STEP DI REGOLAZIONE - PIATTO IN ALLUMINIO LUCIDATO CON INSERTO SMORZANTE IN ACRILICO - MOTORE AC ASINCRONO MONTATO DIRETTAMENTE SUL CONTROTELAIO - PIEDI REGOLABILI IN TRICOM CON INSERTI IN FOAM - USCITE STEREOFONICHE BILANCIATE XLR E SBILANCIATE RCA - CAPPA PARAPOLVERE IN DOTAZIONE - FINITURA ANTHRACITE,BIANCO,ZEBRANO  DIMENSIONI (L X A X P) 470 X 140 X 380 MM - PESO 12 KG

  THE ULTIMATE SUB-CHASSIS TURNTABLE TRADITION REINTERPRETED The sub-chassis is made of triCom, an aluminium/POM composite characterized by excellent damping properties and high stiffness. Its weight has been optimized for high performance. To reduce vibrations, the synchronous AC motor is mounted directly onto the damped sub-chassis. It drives the sub-platter via a machined precision belt.The sub-chassis is suspended by means of three conical springs which can be adjusted from above in order to achieve uniform tension. The bearing is made of sintered bronze with a Teflon thrust pad and optimized for smooth running. The steel axle supported therein provides very low, constant friction and thus presents a uniform load to the motor. Two of the turntable’s three feet can be levelled from above, which facilitates setup. Depending on the model, different damping architectures, tonearm boards and platters are used. The design can accommodate a wide variety of 9" and 10" tonearms also from third-party manufacturers. SPECIAL FEATURES Newly developed, ten-step adjustable pneumatic damping architecture A conical polypropylene membrane under the platter bearing is decoupled from the triCom base via a visco/propylene layer. The air chamber thus formed under the membrane vents into ten apertures in the base plate which can be opened or closed with a slide.Turntable feet with triCom and viscose foam insert, adjustable The tonearm board is also made of triCom and can be cut for almost any 9" and 10" tonearm at the factory. Three-part platter The polished aluminium platter features an acrylic insert that acts as a damping pad for the grooved area of the record. Tonearm connection options Standard: mini 5-pin DIN soldered to RCA/XLR Option: soldered directly to RCA/XLR terminal

THORENS  TD 550 BC                                                  Listino  ufficiale   €. 12.200,00

Giradischi di riferimento a telaio flottante – base del braccio in fibra di carbonio – piatto in alluminio smorzato (6,2 Kg) – motore asincrono - alimentatore separato - senza mbraccio - finitura nero laccato, FINITURA MAKASSAR

The TD 550 comes equipped with a suspended chassis and the belt drive around the outer rim of the platter. The player‘s generous dimensions allow the mounting of 12-inch tonearms also. The tonearm platform is made from extremely stiff carbon fibre compound which ensures a very rigid coupling of platter and tonearm. If necessary, the suspended chassis can be conveniently adjusted in height by thumb screws on top of the plinth. The sturdy feet can likewise be adjusted in order to achieve a level position.SPECIAL FEATURES
Owing to its electronically controlled start-up procedure the extremely silent AC synchronous motor will drive the platter to the selected speed within no time. For making signal connections the TD 550 has been equipped with balanced (XLR) as well as unbalanced (RCA) output jacks.

THORENS  TD 550 TA110                                      Listino  ufficiale   €.  15.000,00

 

 Giradischi di riferimento a telaio flottante – base del braccio in fibra di carbonio – piatto in alluminio smorzato (6,2 Kg) – motore asincrono - alimentatore separato -braccio  Ortofon TA110 9" - finitura nero laccato  VERSIONE  THORENS TD 550 TA210 BLK CHROME 15.100,00euro
CODICE 0101029 GIRADISCHI DI RIFERIMENTO A TELAIO FLOTTANTE - BASE DEL BRACCIO IN FIBRA DI CARBONIO - PIATTO IN ALLUMINIO SMORZATO (6,2 KG) - MOTORE ASINCRONO - ALIMENTATORE SEPARATO -BRACCIO ORTOFON TA 210 DA 12" - DUST COVER IN DOTAZIONE - FINITURA NERO LACCATO

The front panel of the TD 550, which also holds the operational buttons, is available either chrome-plated or with black anodized aluminum finish. The high-grade plinth itself has been refined with finest black piano lacquer whereby the variable side cheeks can be perfectly matched with those of the Thorens Electronic Series. The TD 550 is based on the construction of the TD 350 and like it comes equipped with a suspended chassis and the belt drive around the outer rim of the platter. The player‘s generous dimensions allow the mounting of 12-inch tonearms also. The tonearm platform is made from extremely stiff carbon fibre compound which ensures a very rigid coupling of platter and tonearm. If necessary, the suspended chassis can be conveniently adjusted in height by thumb screws on top of the plinth. The sturdy feet can likewise be adjusted in order to achieve a level position. Owing to its electronically controlled start-up procedure the extremely silent AC synchronous motor will drive the platter to the selected speed within no time. For making signal connections the TD 550 has been equipped with balanced (XLR) as well as unbalanced (RCA) output jacks.


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


 

THORENS  MM-002                                                                                                Listino  ufficiale   €.  220,00

 

THORENS MM 001 PREAMPLIFICATORE FONO MM  ALTEZZA (IN MM) 3.5 LARGHEZZA (IN MM) 9.8 PROFONDITA' (IN MM) 8
 
Phono Preamplifier / RIAA-Equalizer for MM pickup cartridges with metal housing, external power supply unit and compact size.

THORENS  MM-008                                                                                                Listino  ufficiale   €.  320,00

 

THORENS MM 005  PREAMPLIFICATORE FONO MM / MC - CASE ALLUMINIO ALTEZZA (IN MM) 3.5 LARGHEZZA (IN MM) 9.8  PROFONDITA' (IN MM) 8
Phono Preamplifier / RIAA-Equalizer for MM and MC pickup cartridges with brushed aluminium front panel, external power supply unit and compact size.
 

THORENS  MM-008ADC                                                                                          Listino  ufficiale   €.  400,00

 

PREAMPLIFICATORE EQUALIZZATORE RIIA PER TESTINE MM/MC - CONVERTITORE A/D (FINO A 26/96) INCORPORATO CON USCITA USB - GUADAGNO 40 DB /60 DB (MM/MC) - IMPEDENZA DI INGRESSO MM 47 KOHMS + 220 PF - IMPEDENZA DI INGRESSO MC SELEZIONABILE CON PLUG A CORREDO 10, 100 E 1000 OHMS - SENSIBILITA` MM 3.29 MVRMS FOR -PER 10 DBV - SENSIBILITA` MC 0.325 MVRMS PER -10 DBV - INGRESSI E USCITE SBILANCITE -ALMENTATORE ESTERNO A 24 VOLTS - DIMENSIONI 150 X 50 X 117 MM - FINITURA ALLUMINIO

THORENS  TP92                                                                                              Listino  ufficiale   €.  1.000,00

 

THORENS TP 92 CODICE 0108255 BRACCIO PER GIRADISCHI DA 9 POLLICI INPERBIATO - GEOMETRIA LOEFGREN - COSTRUZIONE IN ALLUMINIO LAVORATO A FREDDO - CUSCINETTI A SFERA GIAPPONESI - CONTRAPPESO DISACCOPPIATO E DECENTRATO - VTA REGOLABILE - MASSA EFFETTIVA 11 GRAMMI - FORO DI FISSAGGIO DA 18 MM - ANTISKATING MAGNETICO - PESO TOTALE 0,36 KG


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


THORENS  STABILIZER                                                                                    Listino  ufficiale   €.  160,00

THORENS STABILIZER  STABILIZZATORE SMORZATO PER PIATTI THORENS

Holds the records firmer to the turntable platter, absorbes vibrations and resonances

THORENS  TONARM GAUCE                                                                              Listino  ufficiale   €.  18,00

THORENS TONARM GAUGE  CODICE 0109042 BILANCINA MECCANICA PER RILEVARE IL PESO APPLICATO ALLA TESTINA - SCALA GRADUATA DA 1 A 3 GRAMMI

THORENS  CINGHIA ORIGINALE                                                                Listino  ufficiale   €.  35,00

CINGHIA THORENS PER MODELLI TD 800 LINE / TD 2010 / TD 2015 / TD 2030 / TD 2035 / TD 350 / TD 550 -

CINGHIA UNIVERSALE THORENS (ESCLUSI TD 124 / TD 180 / TD 280 MK IV / TD 2010 / TD 2015 / TD 2030 / TD 2035 / TD 350 / TD 550 / TD 800 LINE / REFERENCE / PRESTIGE) - FOTO PURAMENTE INDICATIVA

THORENS  DUST COVER                                                                                          Telefonare/ email                           

 

Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it



 Legenda istruzioni

Clicca per qui per vedere :  FOTO PRODOTTO

Clicca per qui per vedere :  ISTRUZIONI PRODOTTO

Clicca per qui per vedere :  CATALOGO,PROVA RIVISTE SPECIALIZZATE PRODOTTO


Nota  bene *

Per ordinare o avere gli ultimi prezzi aggiornati telefona al  0174 670100 o invia un E-mail a   info@newaudio.it

*I prezzi indicati  sono  di  listino  ufficiale  delle case produttrici ,nel  caso  di  diffusori  si  riferisce al prezzo  del  singolo  diffusore  per  offerte  ed  eventuali  promozioni  telefonare o  inviare e-mail.

*Il presente listino sostituisce ed annulla ogni precedente. Le caratteristiche e i prezzi indicati  possono variare senza preavviso telefonare o inviare un e-mail per ulteriori domande e conferme sui prezzi sopra riportati.

*Tutti i marchi citati nel presente listino sono di proprietà e registrati alle rispettive Case Produttrici

*Prezzi franco nostro magazzino


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it