VIABLUE

TV LCD PLASMA VIDEO HIFI COMPUTER SAT TELEFONIA CAR STEREO SONORIZZAZIONI AMBIENTI

Home
Su

Attenzione

Per ordinare o avere gli ultimi prezzi aggiornati telefona 0174 670100

o invia un E-mail a info@sinergy.us

Spedizioni in tutto il

MONDO

Hit Counter

SPIKES

Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 info@sinergy.us

VIABLUE QTC SPIKES €.70,00 Per sconto TELEFONARE/EMAIL

ITEM NO.50100 Asorbtion and a noble design.Eleminating of vibrations.ViaBlue™ QTC Spikes receive vibrations from vibrating bodies such as speakers (such as diaphragms) and devices (such as transformers) and reduce them. Maximum pressure builds up at connection point between vibrating bodies and their bases, using a high mass concentrated on three minimum points (peaks), The vibrations are eliminated through the extreme pressure points. This leads to vibration absorption.Function mode.Through the vibration reception disk, vibrations are received on the rotary plate with adjustable height. The vibrations gathered in the main cone are deflected. Excess pressure builds up and is transferred to the especially hardened points. On the equally identically hardened absorption master disk, a maximum pressure point is then created. The vibrations are eliminated.Structure and construction.ViaBlue™ QTC spikes are manufactured from brass. The components subject to pressure (master disk, peak) are hardened with steel. The circumference at the widest point of a QTC spike is 30 mm. The initial height is 34 mm. The principal height adjustment may extend the initial height by another 5 mm. A second height adjustment can be achieved by shifting the peak and the threaded rod. As a rule, the principal height adjustment between the rotary disk and main cone is sufficient.32 parts. Highest precision.A total of 4 spikes per set are included in the delivery. A spike consists of: a grounding component with attached master disk, steel-hardened peak, main cone, rotary disk of adjustable height with attached vibration reception disk, M6 threaded rod and an M6 drive-in nut.With the M6 thread stick included, the QTC spikes can be tightly connected with speakers or devices. This ensures a steady state and the best possible connection of the absorption reducer to the vibrating . For speaker cases and devices with built-in M8 threads, special M6/M8 thread stick go from the QTC spikes M6 thread to an M8 thread, also a M6 to 1/4"-20UNC is available. (detailed information about threads)Spikes are used, for example, for acoustic decoupling of the speaker cases from the base. In this way, feedback is avoided. Clean acoustics from the speaker are thereby ensured. The bass acoustics are not transferred to furnishings and buildings but can develop freely in the room.

VIABLUE QTC SPIKES €.70,00 Per sconto TELEFONARE/EMAIL

ITEM NO.50115 Asorbtion and a noble design.Eleminating of vibrations.ViaBlue™ QTC Spikes receive vibrations from vibrating bodies such as speakers (such as diaphragms) and devices (such as transformers) and reduce them. Maximum pressure builds up at connection point between vibrating bodies and their bases, using a high mass concentrated on three minimum points (peaks), The vibrations are eliminated through the extreme pressure points. This leads to vibration absorption.Function mode.Through the vibration reception disk, vibrations are received on the rotary plate with adjustable height. The vibrations gathered in the main cone are deflected. Excess pressure builds up and is transferred to the especially hardened points. On the equally identically hardened absorption master disk, a maximum pressure point is then created. The vibrations are eliminated.Structure and construction.ViaBlue™ QTC spikes are manufactured from brass. The components subject to pressure (master disk, peak) are hardened with steel. The circumference at the widest point of a QTC spike is 30 mm. The initial height is 34 mm. The principal height adjustment may extend the initial height by another 5 mm. A second height adjustment can be achieved by shifting the peak and the threaded rod. As a rule, the principal height adjustment between the rotary disk and main cone is sufficient.32 parts. Highest precision.A total of 4 spikes per set are included in the delivery. A spike consists of: a grounding component with attached master disk, steel-hardened peak, main cone, rotary disk of adjustable height with attached vibration reception disk, M6 threaded rod and an M6 drive-in nut.With the M6 thread stick included, the QTC spikes can be tightly connected with speakers or devices. This ensures a steady state and the best possible connection of the absorption reducer to the vibrating . For speaker cases and devices with built-in M8 threads, special M6/M8 thread stick go from the QTC spikes M6 thread to an M8 thread, also a M6 to 1/4"-20UNC is available. (detailed information about threads)Spikes are used, for example, for acoustic decoupling of the speaker cases from the base. In this way, feedback is avoided. Clean acoustics from the speaker are thereby ensured. The bass acoustics are not transferred to furnishings and buildings but can develop freely in the room.

VIABLUE QTC DISC €.8,00 Per ordine TELEFONARE/EMAIL

ITEM NO.50120 QTC Ersatz-Unterlegscheiben Optinonal bei Verlust.ViaBlue™ QTC Ersatz-Unterlegscheiben dienen lediglich als Ersatz. QTC Spikes Komplett-Sets enthalten bereits Unterlegscheiben.

VIABLUE QTC DISC €.8,00 Per ordine TELEFONARE/EMAIL

ITEM NO.50125 QTC Ersatz-Unterlegscheiben Optinonal bei Verlust.ViaBlue™ QTC Ersatz-Unterlegscheiben dienen lediglich als Ersatz. QTC Spikes Komplett-Sets enthalten bereits Unterlegscheiben.

VIABLUE HS SPIKES €.29,00 Per ordine TELEFONARE/EMAIL

ITEM NO.50200 BLACK Compactly. On the point.ViaBlue™ HS Spikes.The vibrations are absorbed through the high pressure point achieved, where the maximum weight (speakers, devices) is concentrated on a minimum point (point of the spike). Most notably, the bass acoustics sound clearer, cleaner and more distinct. Thus, the bass is not transmitted to the furnishings and buildings, but can develop freely in the room.Each HS Spike consists of a total of 4 components: the main absorber cone, a base plate, the M6 to M6 thread stick and an M6 drive-in nut. Not only are the acoustics more distinct, but visually the HS spikes are an eye-catcher. Material/ ground: brass, black-chrome, Ø = 0.70 inch, M6 threads, loads of at least 50 kg per set (4 spikes per box)With the M6 to M6 thread stick included, the HS spikes can be tightly connected with speakers or devices. This ensures a steady state and the best possible connection of the absorption reducer to the vibrating . For speaker cases and devices with built-in M8 threads, special M6/M8 thread stick go from the HS spikes M6 thread to an M8 thread, also a M6 to 1/4"-20UNC is available. (detailed information about threads)The three-part HS spikes are adjustable in height. The initial height is 1.5 inch. The maximum height adjustment recommended is 0.15 inch. The spikes are delivered with drive-in nuts.

VIABLUE HS SPIKES €.29,00 Per ordine TELEFONARE/EMAIL

ITEM NO.50205 GOLD Compactly. On the point.ViaBlue™ HS Spikes.The vibrations are absorbed through the high pressure point achieved, where the maximum weight (speakers, devices) is concentrated on a minimum point (point of the spike). Most notably, the bass acoustics sound clearer, cleaner and more distinct. Thus, the bass is not transmitted to the furnishings and buildings, but can develop freely in the room.Each HS Spike consists of a total of 4 components: the main absorber cone, a base plate, the M6 to M6 thread stick and an M6 drive-in nut. Not only are the acoustics more distinct, but visually the HS spikes are an eye-catcher. Material/ ground: brass, black-chrome, Ø = 0.70 inch, M6 threads, loads of at least 50 kg per set (4 spikes per box)With the M6 to M6 thread stick included, the HS spikes can be tightly connected with speakers or devices. This ensures a steady state and the best possible connection of the absorption reducer to the vibrating . For speaker cases and devices with built-in M8 threads, special M6/M8 thread stick go from the HS spikes M6 thread to an M8 thread, also a M6 to 1/4"-20UNC is available. (detailed information about threads)The three-part HS spikes are adjustable in height. The initial height is 1.5 inch. The maximum height adjustment recommended is 0.15 inch. The spikes are delivered with drive-in nuts.

VIABLUE HS SPIKES €.29,00 Per ordine TELEFONARE/EMAIL

ITEM NO.50210 SILVER Compactly. On the point.ViaBlue™ HS Spikes.The vibrations are absorbed through the high pressure point achieved, where the maximum weight (speakers, devices) is concentrated on a minimum point (point of the spike). Most notably, the bass acoustics sound clearer, cleaner and more distinct. Thus, the bass is not transmitted to the furnishings and buildings, but can develop freely in the room.Each HS Spike consists of a total of 4 components: the main absorber cone, a base plate, the M6 to M6 thread stick and an M6 drive-in nut. Not only are the acoustics more distinct, but visually the HS spikes are an eye-catcher. Material/ ground: brass, black-chrome, Ø = 0.70 inch, M6 threads, loads of at least 50 kg per set (4 spikes per box)With the M6 to M6 thread stick included, the HS spikes can be tightly connected with speakers or devices. This ensures a steady state and the best possible connection of the absorption reducer to the vibrating . For speaker cases and devices with built-in M8 threads, special M6/M8 thread stick go from the HS spikes M6 thread to an M8 thread, also a M6 to 1/4"-20UNC is available. (detailed information about threads)The three-part HS spikes are adjustable in height. The initial height is 1.5 inch. The maximum height adjustment recommended is 0.15 inch. The spikes are delivered with drive-in nuts

VIABLUE HS DISCS €.8,00 Per ordine TELEFONARE/EMAIL

ITEM NO.50200 BLACKHS Ersatz-Unterlegscheiben Optinonal bei Verlust. ViaBlue™ HS Ersatz-Unterlegscheiben dienen lediglich als Ersatz. HS Spikes Komplett-Sets enthalten bereits Unterlegscheiben.

VIABLUE HS DISCS €.8,00 Per ordine TELEFONARE/EMAIL

ITEM NO.50205 GOLD HS Ersatz-Unterlegscheiben Optinonal bei Verlust. ViaBlue™ HS Ersatz-Unterlegscheiben dienen lediglich als Ersatz. HS Spikes Komplett-Sets enthalten bereits Unterlegscheiben.

VIABLUE HS DISCS €.8,00 Per ordine TELEFONARE/EMAIL

ITEM NO.50210 SILVER HS Ersatz-Unterlegscheiben Optinonal bei Verlust. ViaBlue™ HS Ersatz-Unterlegscheiben dienen lediglich als Ersatz. HS Spikes Komplett-Sets enthalten bereits Unterlegscheiben.

VIABLUE TRI ABSORBER €.75,00 Per ordine TELEFONARE/EMAIL

ITEM NO.50150 Efficient dismantling of oscillations.Reducing of vibrations.ViaBlue™ TRI absorbers receive vibrations from vibrating bodies like speakers (such as diaphragms) and devices (such as transformers and reduces them. Through a high pressure concentrated on three minimum points (peaks), maximum pressure is built up as a connection point between vibrating bodies and their base. Through the extreme pressure points, the vibrations are eliminated. This leads to vibration absorption.The functional principle of the TRI Absorber is broken down into three task areas: 1.) reception of vibrations, 2.) concentration of the vibrations received/gathered on three pressure points, 3.) deflection of the absorbed vibrations on the base.Vibrations are received through the vibration reception disk. The vibrations, gathered on three especially hardened spikes (peaks), are transferred via the integrated master disk. The excess pressure creates a maximum of three pressure points. The vibrations are eliminated.In this way, the vibrations of speakers and devices are not transmitted to furnishings and buildings and do not cause any static noise.ViaBlue™ TRI Absorbers are manufactured from brass. The components subject to pressure (master disk, peak) are hardened with steel. The circumference at the widest point of a TRI absorber is 30 mm. The initial height is 15 mm. The principal height adjustment may extend or shorten the initial height by another 1 mm.A total of 4 absorbers per set are included in delivery. An absorber consists of: a threaded grounding component, a rotary disk of adjustable height, three steel-hardened spikes (peaks), and a hardened master disk incorporated in a vibration reception disk.Absorbers are used, for example, for acoustic decoupling of the speaker cases from the base. In this way, feedback is avoided. Clean acoustics from the speaker are thereby ensured. The bass is not transferred to furnishings and buildings but can develop freely in the room.

VIABLUE TRI ABSORBER €.75,00Per ordine TELEFONARE/EMAIL

ITEM NO.50165 Efficient dismantling of oscillations.Reducing of vibrations.ViaBlue™ TRI absorbers receive vibrations from vibrating bodies like speakers (such as diaphragms) and devices (such as transformers and reduces them. Through a high pressure concentrated on three minimum points (peaks), maximum pressure is built up as a connection point between vibrating bodies and their base. Through the extreme pressure points, the vibrations are eliminated. This leads to vibration absorption.The functional principle of the TRI Absorber is broken down into three task areas: 1.) reception of vibrations, 2.) concentration of the vibrations received/gathered on three pressure points, 3.) deflection of the absorbed vibrations on the base.Vibrations are received through the vibration reception disk. The vibrations, gathered on three especially hardened spikes (peaks), are transferred via the integrated master disk. The excess pressure creates a maximum of three pressure points. The vibrations are eliminated.In this way, the vibrations of speakers and devices are not transmitted to furnishings and buildings and do not cause any static noise.ViaBlue™ TRI Absorbers are manufactured from brass. The components subject to pressure (master disk, peak) are hardened with steel. The circumference at the widest point of a TRI absorber is 30 mm. The initial height is 15 mm. The principal height adjustment may extend or shorten the initial height by another 1 mm.A total of 4 absorbers per set are included in delivery. An absorber consists of: a threaded grounding component, a rotary disk of adjustable height, three steel-hardened spikes (peaks), and a hardened master disk incorporated in a vibration reception disk.Absorbers are used, for example, for acoustic decoupling of the speaker cases from the base. In this way, feedback is avoided. Clean acoustics from the speaker are thereby ensured. The bass is not transferred to furnishings and buildings but can develop freely in the room.

CAVI HDMI

Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 info@sinergy.us

VIABLUE S-9000 75 cm ITEM N° 20006 €. 90,00 Per ordine TELEFONARE/EMAIL

VIABLUE S-9000 100 cm ITEM N° 20008 €. 94,00 Per ordine TELEFONARE/EMAIL

VIABLUE S-9000 150 cm ITEM N° 20010 €. 100,00 Per ordine TELEFONARE/EMAIL

VIABLUE S-9000 200 cm ITEM N° 20012 €. 110,00 Per ordine TELEFONARE/EMAIL

VIABLUE S-9000 300 cm ITEM N° 20015 €. 122,00 Per ordine TELEFONARE/EMAIL

VIABLUE S-9000 400 cm ITEM N° 20018 €. 136,00 Per ordine TELEFONARE/EMAIL

VIABLUE S-9000 500 cm ITEM N° 20022 €. 152,00 Per ordine TELEFONARE/EMAIL

VIABLUE S-9000 750 cm ITEM N° 20028 €. 190,00 Per ordine TELEFONARE/EMAIL

VIABLUE S-9000 1000 cm ITEM N° 20034 €. 222,00 Per ordine TELEFONARE/EMAIL

VIABLUE S-9000 1200 cm ITEM N° 20038 €. 252,00 Per ordine TELEFONARE/EMAIL

VIABLUE S-9000 1500 cm ITEM N° 20044 €. 295,00 Per ordine TELEFONARE/EMAIL

VIABLUE S-9000 2000 cm ITEM N° 20054 €. 370,00 Per ordine TELEFONARE/EMAIL

S-900 Silver HDMI cable 1.3c High-End HDMI cable: Fully compatible to HDMI 1.3a, 1.3b, 1.3c ViaBlue™ S-900 Silver HDMI 1.3c cables are high-end HDMI connections for digital audio and video applications. Conductors with silver-plated strands ensure high speed transfer of the transmission of audio and video signals. Three shields block external interference fields and avoid any influences on the signal's frequencies. The built-in ferrite core filters eliminate intermediate currents and ensure noise reduction in the transmission.ViaBlue™ S-900 HDMI high-end connectors with 24 karat gold-plated contacts guarantee low resistance connections for any HDMI devices. Signals can be transferred with high speed at the silver-plated conductors. The ViaBlue™ triple shield protects the signal transfer by any distortions.S-900 Silver HDMI cables are 1.3 compliant and support the current maximum resolution of 1080p in HDMI standard 1.3c for cable length up to 20 meters. Since HDMI 1.3 is backward compatible with earlier versions, also older datas can be transferred as well.

CAVI PER DIFFUSORI TERMINATI

Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 info@sinergy.us

VIABLUE SC-2 150 cm ITEM N° 24260 €.132,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-2 300 cm ITEM N° 24265 €.166,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-2 500 cm ITEM N° 24272 €.216,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-2 800 cm ITEM N° 24280 €.290,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-2 1500 cm ITEM N° 24294 €.450,00 Per prezzo scontato TELEFONA/ E-MAIL

Cavi terminti con crimp sleeves gold 2 x4 mm in argento ultima versione dell' ormai famoso cavo viablue composto da 2 cavi dal diametro di 4 mm² a sua volta composto da sette cavi per un total di 448 fili singoli in puro rame ofc dove il 50% placcato in argento per ottenere un migliore risultato alle alte frequenze mentre il restamte 50% e' dedicato al trasferimento del segnale per le basse frequenze
QUESTI CAVI HANNO BISOGNO DI UN RODAGGIO PER OTTENERE LE MASSIME PRESTAZIONI DI 36 ORE

Definition. Details. Living music.High-End quality. Salient Design. ViaBlue™ Cobra.ViaBlue™ SC-2 Silver Series loudspeaker cables have a combination of silvered braids for the high pass range and tinned braids for the pressureful rendition of the low pass. On the ends the ViaBlue™ T6s Series loudspeaker plug-in connections plated with genuine gold are terminated.SC-2 speaker cables have a transparent and three-dimensional acoustics and a brilliant, airy quality in the high range. Clean lows and basses homogeneously round out the acoustic pattern. Technically, all of the frequency ranges are cleanly and realistically represented and reproduced in a linear fashion.Different materials for different ranges.Both 4 mm2 leads of the SC-2 speaker cable consist of seven-stranded lays with a total of 448 individual wire conductors. In order to customize the sound range for the individual frequency ranges, five strands have genuine silver plating for accurate reproduction of the high range and two strands have pure copper strands for powerful accentuation of the bass.The SC-2 speaker cables have ViaBlue™ Cobra sleeve around them that even at first glance displays the dynamics of the high-end speaker cables.Silver plating for more brilliance.Through the combination of silver-plated and tin-plated leads, the finest details and brilliance of the treble range as well as the lower frequency signals of the bass range are fully carried and powerfully reproduced through the attached speakers.The SC-2 speaker cables are braided with the ViaBlue™Cobra protective sleeve, which also affords at first glance a visual impression of the dynamic quality of the high-end speaker cables.The splitters typically used with ViaBlue™ cables protect the cable ends from snapping off and, at the same time, provide a professional, well thought out cable routing of the single leads.Definition. Details. Living music.High-End quality. Salient Design. ViaBlue™ Cobra.ViaBlue™ SC-2 Silver Series loudspeaker cable have a combination of silvered braids for the high pass range and tinned braids for the pressureful rendition of the low pass. SC-2 speaker cables have a transparent and three-dimensional acoustics and a brilliant, airy quality in the high range. Clean lows and basses homogeneously round out the acoustic pattern. Technically, all of the frequency ranges are cleanly and realistically represented and reproduced in a linear fashion.Different materials for different ranges.Both 4 mm2 leads of the SC-2 speaker cable consist of seven-stranded lays with a total of 448 individual wire conductors. In order to customize the sound range for the individual frequency ranges, 50% of the braids have a genuine silver plating for accurate reproduction of the high range and 50% have pure copper strands for powerful accentuation of the bass.The basic burn-in time of the SC-2 speaker cables is approx. 18-20 hours. The total burn-in time is approx. 38-40 hours. (Exact times depend on temperature and location)

VIABLUE SC-2 150 cm ITEM N° 24610 €.180,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-2 300 cm ITEM N° 24615 €.216,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-2 500 cm ITEM N° 24622 €.262,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-2 800 cm ITEM N° 24630 €.334,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-2 1500 cm ITEM N° 24644 €.500,00 Per prezzo scontato TELEFONA/ E-MAIL

Cavi terminti con ts banana gold 2 x4 mm in argento ultima versione dell' ormai famoso cavo viablue composto da 2 cavi dal diametro di 4 mm² a sua volta composto da sette cavi per un total di 448 fili singoli in puro rame ofc dove il 50% placcato in argento per ottenere un migliore risultato alle alte frequenze mentre il restamte 50% e' dedicato al trasferimento del segnale per le basse frequenze
QUESTI CAVI HANNO BISOGNO DI UN RODAGGIO PER OTTENERE LE MASSIME PRESTAZIONI DI 36 ORE

VIABLUE SC-2 150 cm ITEM N° 24210 €.202,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-2 300 cm ITEM N° 24215 €.238,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-2 500 cm ITEM N° 24222 €.289,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-2 800 cm ITEM N° 24230 €.360,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-2 1500 cm ITEM N° 24244 €.520,00 Per prezzo scontato TELEFONA/ E-MAIL

Cavi terminti con ts6 banana gold 2 x4 mm in argento ultima versione dell' ormai famoso cavo viablue composto da 2 cavi dal diametro di 4 mm² a sua volta composto da sette cavi per un total di 448 fili singoli in puro rame ofc dove il 50% placcato in argento per ottenere un migliore risultato alle alte frequenze mentre il restamte 50% e' dedicato al trasferimento del segnale per le basse frequenze
QUESTI CAVI HANNO BISOGNO DI UN RODAGGIO PER OTTENERE LE MASSIME PRESTAZIONI DI 36 ORE

VIABLUE SC-4 150 cm ITEM N° 24460 €.176,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-4 300 cm ITEM N° 24465 €.230,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-4 500 cm ITEM N° 24472 €.295,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-4 800 cm ITEM N° 24480 €.390,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-4 1500 cm ITEM N° 24494 €.630,00 Per prezzo scontato TELEFONA/ E-MAIL

Cavi terminti con crimp sleeves gold 2 x8 mm in argento Cavi terminti BI-WIRE con ts 6 banane gold gold 2 x8 mm in argento ultima versione dell' ormai famoso cavo viablue composto da 4 cavi dal diametro di 4 mm² a sua volta composto da sette cavi per un total di 896 fili singoli in puro rame ofc dove il 50% placcato in argento per ottenere un migliore risultato alle alte frequenze mentre il restamte 50% e' dedicato al trasferimento del segnale per le basse frequenze
QUESTI CAVI HANNO BISOGNO DI UN RODAGGIO PER OTTENERE LE MASSIME PRESTAZIONI DI 36 ORE

Definition. Details. Living music.High-End quality. Salient Design. ViaBlue™ Cobra.ViaBlue™ SC-2 Silver Series loudspeaker cables have a combination of silvered braids for the high pass range and tinned braids for the pressureful rendition of the low pass. On the ends the ViaBlue™ T6s Series loudspeaker plug-in connections plated with genuine gold are terminated.SC-2 speaker cables have a transparent and three-dimensional acoustics and a brilliant, airy quality in the high range. Clean lows and basses homogeneously round out the acoustic pattern. Technically, all of the frequency ranges are cleanly and realistically represented and reproduced in a linear fashion.Different materials for different ranges.Both 4 mm2 leads of the SC-2 speaker cable consist of seven-stranded lays with a total of 448 individual wire conductors. In order to customize the sound range for the individual frequency ranges, five strands have genuine silver plating for accurate reproduction of the high range and two strands have pure copper strands for powerful accentuation of the bass.plated strands for powerful playback of the bass range. SC-4 speaker cables have a transparent and three-dimensional sound and a brilliant, airy quality in the high range. Clean lows and basses homogeneously round out the acoustic pattern. Technically, all the frequency ranges are cleanly and realistically represented and reproduced in a linear fashion.Seperate signal lines for high and low pass.The advantage of a bi-wire speaker cable compared to a single-wire speaker cable (e.g. twin speaker cable) is to reduce distortions. When speakers are connected to an amplifier with traditional wiring, distortions are created. This can be caused by vibrations of the woofer thereby creating voltage in the cable. These distortions are not sufficiently eliminated by the amplifier. Some of these distortions are modified on the tweeter, mid-range speaker and woofer. Bi-wiring reduces such distortions. They occur only at the amplifier. There they can be efficiently eliminated by the amplifier control loop. A control loop serves to hold a certain magnitude constant (negative feedback control, scanning by sensing devices, comparison of the values with the reference value, sending a correction signal when there are deviations, whereupon the deviating state is reset to the initial value).Silver plating for more brilliance.The four 4 mm2 leads of the SC-4 more speaker cable consist of ever 7 stranded bundles with altogether 896 individual braids. In order to specialize the sound range for the individual frequency ranges, two of the four veins are silvered and two veins tinned. Through the combination of silver-plated and tin-plated leads, the finest details and brilliance of the treble range as well as the lower frequency signals of the bass range are fully carried and powerfully reproduced through the attached speakers. The two silvered leads are connected with the high tone range of the loudspeakers. By the silver plating finest details will be transfered in the high tone range. The two tinned copper leads are connected with the low range of the loudspeakers. The low-frequency signals are completely transported in base range and shown by the tinning of the copper braids over the attached loudspeakers pressureful.Burned in well.The basic burn-in time of the SC-4 speaker cables is approx. 22-24 hours. The total burn-in time is approx. 42-44 hours. (Exact times depend on temperature and location)Tecnical Dates: 4x4 mm2 lines (je 224 x 0.15 mm), Isolation: PVC, Leader resistance, tinned: 4.6 mOhm / m, Leader resistance silvered: 4.4 mOhm / m, Leader resistance: 136 pF / m --> always the lines facing diagonally, Inductance: 0,63 µH / m

VIABLUE SC-4 150 cm ITEM N° 24660 €.212,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-4 300 cm ITEM N° 24665 €.262,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-4 500 cm ITEM N° 24672 €.330,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-4 800 cm ITEM N° 24680 €.430,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-4 1500 cm ITEM N° 24694 €.660,00 Per prezzo scontato TELEFONA/ E-MAIL

Cavi terminti con ts banane gold 2 x8 mm in argento Cavi terminti BI-WIRE con ts 6 banane gold gold 2 x8 mm in argento ultima versione dell' ormai famoso cavo viablue composto da 4 cavi dal diametro di 4 mm² a sua volta composto da sette cavi per un total di 896 fili singoli in puro rame ofc dove il 50% placcato in argento per ottenere un migliore risultato alle alte frequenze mentre il restamte 50% e' dedicato al trasferimento del segnale per le basse frequenze
QUESTI CAVI HANNO BISOGNO DI UN RODAGGIO PER OTTENERE LE MASSIME PRESTAZIONI DI 36 ORE

Definition. Details. Living music.High-End quality. Salient Design. ViaBlue™ Cobra.ViaBlue™ SC-2 Silver Series loudspeaker cables have a combination of silvered braids for the high pass range and tinned braids for the pressureful rendition of the low pass. On the ends the ViaBlue™ T6s Series loudspeaker plug-in connections plated with genuine gold are terminated.SC-2 speaker cables have a transparent and three-dimensional acoustics and a brilliant, airy quality in the high range. Clean lows and basses homogeneously round out the acoustic pattern. Technically, all of the frequency ranges are cleanly and realistically represented and reproduced in a linear fashion.Different materials for different ranges.Both 4 mm2 leads of the SC-2 speaker cable consist of seven-stranded lays with a total of 448 individual wire conductors. In order to customize the sound range for the individual frequency ranges, five strands have genuine silver plating for accurate reproduction of the high range and two strands have pure copper strands for powerful accentuation of the bass.plated strands for powerful playback of the bass range. SC-4 speaker cables have a transparent and three-dimensional sound and a brilliant, airy quality in the high range. Clean lows and basses homogeneously round out the acoustic pattern. Technically, all the frequency ranges are cleanly and realistically represented and reproduced in a linear fashion.Seperate signal lines for high and low pass.The advantage of a bi-wire speaker cable compared to a single-wire speaker cable (e.g. twin speaker cable) is to reduce distortions. When speakers are connected to an amplifier with traditional wiring, distortions are created. This can be caused by vibrations of the woofer thereby creating voltage in the cable. These distortions are not sufficiently eliminated by the amplifier. Some of these distortions are modified on the tweeter, mid-range speaker and woofer. Bi-wiring reduces such distortions. They occur only at the amplifier. There they can be efficiently eliminated by the amplifier control loop. A control loop serves to hold a certain magnitude constant (negative feedback control, scanning by sensing devices, comparison of the values with the reference value, sending a correction signal when there are deviations, whereupon the deviating state is reset to the initial value).Silver plating for more brilliance.The four 4 mm2 leads of the SC-4 more speaker cable consist of ever 7 stranded bundles with altogether 896 individual braids. In order to specialize the sound range for the individual frequency ranges, two of the four veins are silvered and two veins tinned. Through the combination of silver-plated and tin-plated leads, the finest details and brilliance of the treble range as well as the lower frequency signals of the bass range are fully carried and powerfully reproduced through the attached speakers. The two silvered leads are connected with the high tone range of the loudspeakers. By the silver plating finest details will be transfered in the high tone range. The two tinned copper leads are connected with the low range of the loudspeakers. The low-frequency signals are completely transported in base range and shown by the tinning of the copper braids over the attached loudspeakers pressureful.Burned in well.The basic burn-in time of the SC-4 speaker cables is approx. 22-24 hours. The total burn-in time is approx. 42-44 hours. (Exact times depend on temperature and location)Tecnical Dates: 4x4 mm2 lines (je 224 x 0.15 mm), Isolation: PVC, Leader resistance, tinned: 4.6 mOhm / m, Leader resistance silvered: 4.4 mOhm / m, Leader resistance: 136 pF / m --> always the lines facing diagonally, Inductance: 0,63 µH / m

VIABLUE SC-4 150 cm ITEM N° 24410 €.230,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-4 300 cm ITEM N° 24415 €.286,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-4 500 cm ITEM N° 24422 €.350,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-4 800 cm ITEM N° 24430 €.450,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-4 1500 cm ITEM N° 24444 €.690,00 Per prezzo scontato TELEFONA/ E-MAIL

Cavi terminti con ts 6 banane gold 2 x8 mm in argento Cavi terminti BI-WIRE con ts 6 banane gold gold 2 x8 mm in argento ultima versione dell' ormai famoso cavo viablue composto da 4 cavi dal diametro di 4 mm² a sua volta composto da sette cavi per un total di 896 fili singoli in puro rame ofc dove il 50% placcato in argento per ottenere un migliore risultato alle alte frequenze mentre il restamte 50% e' dedicato al trasferimento del segnale per le basse frequenze
QUESTI CAVI HANNO BISOGNO DI UN RODAGGIO PER OTTENERE LE MASSIME PRESTAZIONI DI 36 ORE

Definition. Details. Living music.High-End quality. Salient Design. ViaBlue™ Cobra.ViaBlue™ SC-2 Silver Series loudspeaker cables have a combination of silvered braids for the high pass range and tinned braids for the pressureful rendition of the low pass. On the ends the ViaBlue™ T6s Series loudspeaker plug-in connections plated with genuine gold are terminated.SC-2 speaker cables have a transparent and three-dimensional acoustics and a brilliant, airy quality in the high range. Clean lows and basses homogeneously round out the acoustic pattern. Technically, all of the frequency ranges are cleanly and realistically represented and reproduced in a linear fashion.Different materials for different ranges.Both 4 mm2 leads of the SC-2 speaker cable consist of seven-stranded lays with a total of 448 individual wire conductors. In order to customize the sound range for the individual frequency ranges, five strands have genuine silver plating for accurate reproduction of the high range and two strands have pure copper strands for powerful accentuation of the bass.plated strands for powerful playback of the bass range. SC-4 speaker cables have a transparent and three-dimensional sound and a brilliant, airy quality in the high range. Clean lows and basses homogeneously round out the acoustic pattern. Technically, all the frequency ranges are cleanly and realistically represented and reproduced in a linear fashion.Seperate signal lines for high and low pass.The advantage of a bi-wire speaker cable compared to a single-wire speaker cable (e.g. twin speaker cable) is to reduce distortions. When speakers are connected to an amplifier with traditional wiring, distortions are created. This can be caused by vibrations of the woofer thereby creating voltage in the cable. These distortions are not sufficiently eliminated by the amplifier. Some of these distortions are modified on the tweeter, mid-range speaker and woofer. Bi-wiring reduces such distortions. They occur only at the amplifier. There they can be efficiently eliminated by the amplifier control loop. A control loop serves to hold a certain magnitude constant (negative feedback control, scanning by sensing devices, comparison of the values with the reference value, sending a correction signal when there are deviations, whereupon the deviating state is reset to the initial value).Silver plating for more brilliance.The four 4 mm2 leads of the SC-4 more speaker cable consist of ever 7 stranded bundles with altogether 896 individual braids. In order to specialize the sound range for the individual frequency ranges, two of the four veins are silvered and two veins tinned. Through the combination of silver-plated and tin-plated leads, the finest details and brilliance of the treble range as well as the lower frequency signals of the bass range are fully carried and powerfully reproduced through the attached speakers. The two silvered leads are connected with the high tone range of the loudspeakers. By the silver plating finest details will be transfered in the high tone range. The two tinned copper leads are connected with the low range of the loudspeakers. The low-frequency signals are completely transported in base range and shown by the tinning of the copper braids over the attached loudspeakers pressureful.Burned in well.The basic burn-in time of the SC-4 speaker cables is approx. 22-24 hours. The total burn-in time is approx. 42-44 hours. (Exact times depend on temperature and location)Tecnical Dates: 4x4 mm2 lines (je 224 x 0.15 mm), Isolation: PVC, Leader resistance, tinned: 4.6 mOhm / m, Leader resistance silvered: 4.4 mOhm / m, Leader resistance: 136 pF / m --> always the lines facing diagonally, Inductance: 0,63 µH / m

CAVI PER DIFFUSORI TERMINATI BI-WIRE

Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 info@sinergy.us

VIABLUE SC-4 BI-WIRE 150 cm ITEM N° 24360 €.170,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-4 BI-WIRE 300 cm ITEM N° 24365 €.229,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-4 BI-WIRE 500 cm ITEM N° 24372 €.290,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-4 BI-WIRE 800 cm ITEM N° 24380 €.390,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-4 BI-WIRE 1500 cm ITEM N° 24394 €.630,00 Per prezzo scontato TELEFONA/ E-MAIL

Cavi terminti BI-WIRE con crimp sleeves gold 2 x8 mm in argento Cavi terminti BI-WIRE con ts 6 banane gold gold 2 x8 mm in argento ultima versione dell' ormai famoso cavo viablue composto da 4 cavi dal diametro di 4 mm² a sua volta composto da sette cavi per un total di 896 fili singoli in puro rame ofc dove il 50% placcato in argento per ottenere un migliore risultato alle alte frequenze mentre il restamte 50% e' dedicato al trasferimento del segnale per le basse frequenze
QUESTI CAVI HANNO BISOGNO DI UN RODAGGIO PER OTTENERE LE MASSIME PRESTAZIONI DI 36 ORE

Definition. Details. Living music.High-End quality. Salient Design. ViaBlue™ Cobra.ViaBlue™ SC-2 Silver Series loudspeaker cables have a combination of silvered braids for the high pass range and tinned braids for the pressureful rendition of the low pass. On the ends the ViaBlue™ T6s Series loudspeaker plug-in connections plated with genuine gold are terminated.SC-2 speaker cables have a transparent and three-dimensional acoustics and a brilliant, airy quality in the high range. Clean lows and basses homogeneously round out the acoustic pattern. Technically, all of the frequency ranges are cleanly and realistically represented and reproduced in a linear fashion.Different materials for different ranges.Both 4 mm2 leads of the SC-2 speaker cable consist of seven-stranded lays with a total of 448 individual wire conductors. In order to customize the sound range for the individual frequency ranges, five strands have genuine silver plating for accurate reproduction of the high range and two strands have pure copper strands for powerful accentuation of the bass.plated strands for powerful playback of the bass range. SC-4 speaker cables have a transparent and three-dimensional sound and a brilliant, airy quality in the high range. Clean lows and basses homogeneously round out the acoustic pattern. Technically, all the frequency ranges are cleanly and realistically represented and reproduced in a linear fashion.Seperate signal lines for high and low pass.The advantage of a bi-wire speaker cable compared to a single-wire speaker cable (e.g. twin speaker cable) is to reduce distortions. When speakers are connected to an amplifier with traditional wiring, distortions are created. This can be caused by vibrations of the woofer thereby creating voltage in the cable. These distortions are not sufficiently eliminated by the amplifier. Some of these distortions are modified on the tweeter, mid-range speaker and woofer. Bi-wiring reduces such distortions. They occur only at the amplifier. There they can be efficiently eliminated by the amplifier control loop. A control loop serves to hold a certain magnitude constant (negative feedback control, scanning by sensing devices, comparison of the values with the reference value, sending a correction signal when there are deviations, whereupon the deviating state is reset to the initial value).Silver plating for more brilliance.The four 4 mm2 leads of the SC-4 more speaker cable consist of ever 7 stranded bundles with altogether 896 individual braids. In order to specialize the sound range for the individual frequency ranges, two of the four veins are silvered and two veins tinned. Through the combination of silver-plated and tin-plated leads, the finest details and brilliance of the treble range as well as the lower frequency signals of the bass range are fully carried and powerfully reproduced through the attached speakers. The two silvered leads are connected with the high tone range of the loudspeakers. By the silver plating finest details will be transfered in the high tone range. The two tinned copper leads are connected with the low range of the loudspeakers. The low-frequency signals are completely transported in base range and shown by the tinning of the copper braids over the attached loudspeakers pressureful.Burned in well.The basic burn-in time of the SC-4 speaker cables is approx. 22-24 hours. The total burn-in time is approx. 42-44 hours. (Exact times depend on temperature and location)Tecnical Dates: 4x4 mm2 lines (je 224 x 0.15 mm), Isolation: PVC, Leader resistance, tinned: 4.6 mOhm / m, Leader resistance silvered: 4.4 mOhm / m, Leader resistance: 136 pF / m --> always the lines facing diagonally, Inductance: 0,63 µH / m

VIABLUE SC-4 BI-WIRE 150 cm ITEM N° 24810 €.248,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-4 BI-WIRE 300 cm ITEM N° 24815 €.298,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-4 BI-WIRE 500 cm ITEM N° 24822 €.366,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-4 BI-WIRE 800 cm ITEM N° 24830 €.466,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-4 BI-WIRE 1500 cm ITEM N° 24844 €.690,00 Per prezzo scontato TELEFONA/ E-MAIL

Cavi terminti BI-WIRE con ts banane gold gold 2 x8 mm in argento Cavi terminti BI-WIRE con ts 6 banane gold gold 2 x8 mm in argento ultima versione dell' ormai famoso cavo viablue composto da 4 cavi dal diametro di 4 mm² a sua volta composto da sette cavi per un total di 896 fili singoli in puro rame ofc dove il 50% placcato in argento per ottenere un migliore risultato alle alte frequenze mentre il restamte 50% e' dedicato al trasferimento del segnale per le basse frequenze
QUESTI CAVI HANNO BISOGNO DI UN RODAGGIO PER OTTENERE LE MASSIME PRESTAZIONI DI 36 ORE

Definition. Details. Living music.High-End quality. Salient Design. ViaBlue™ Cobra.ViaBlue™ SC-2 Silver Series loudspeaker cables have a combination of silvered braids for the high pass range and tinned braids for the pressureful rendition of the low pass. On the ends the ViaBlue™ T6s Series loudspeaker plug-in connections plated with genuine gold are terminated.SC-2 speaker cables have a transparent and three-dimensional acoustics and a brilliant, airy quality in the high range. Clean lows and basses homogeneously round out the acoustic pattern. Technically, all of the frequency ranges are cleanly and realistically represented and reproduced in a linear fashion.Different materials for different ranges.Both 4 mm2 leads of the SC-2 speaker cable consist of seven-stranded lays with a total of 448 individual wire conductors. In order to customize the sound range for the individual frequency ranges, five strands have genuine silver plating for accurate reproduction of the high range and two strands have pure copper strands for powerful accentuation of the bass.plated strands for powerful playback of the bass range. SC-4 speaker cables have a transparent and three-dimensional sound and a brilliant, airy quality in the high range. Clean lows and basses homogeneously round out the acoustic pattern. Technically, all the frequency ranges are cleanly and realistically represented and reproduced in a linear fashion.Seperate signal lines for high and low pass.The advantage of a bi-wire speaker cable compared to a single-wire speaker cable (e.g. twin speaker cable) is to reduce distortions. When speakers are connected to an amplifier with traditional wiring, distortions are created. This can be caused by vibrations of the woofer thereby creating voltage in the cable. These distortions are not sufficiently eliminated by the amplifier. Some of these distortions are modified on the tweeter, mid-range speaker and woofer. Bi-wiring reduces such distortions. They occur only at the amplifier. There they can be efficiently eliminated by the amplifier control loop. A control loop serves to hold a certain magnitude constant (negative feedback control, scanning by sensing devices, comparison of the values with the reference value, sending a correction signal when there are deviations, whereupon the deviating state is reset to the initial value).Silver plating for more brilliance.The four 4 mm2 leads of the SC-4 more speaker cable consist of ever 7 stranded bundles with altogether 896 individual braids. In order to specialize the sound range for the individual frequency ranges, two of the four veins are silvered and two veins tinned. Through the combination of silver-plated and tin-plated leads, the finest details and brilliance of the treble range as well as the lower frequency signals of the bass range are fully carried and powerfully reproduced through the attached speakers. The two silvered leads are connected with the high tone range of the loudspeakers. By the silver plating finest details will be transfered in the high tone range. The two tinned copper leads are connected with the low range of the loudspeakers. The low-frequency signals are completely transported in base range and shown by the tinning of the copper braids over the attached loudspeakers pressureful.Burned in well.The basic burn-in time of the SC-4 speaker cables is approx. 22-24 hours. The total burn-in time is approx. 42-44 hours. (Exact times depend on temperature and location)Tecnical Dates: 4x4 mm2 lines (je 224 x 0.15 mm), Isolation: PVC, Leader resistance, tinned: 4.6 mOhm / m, Leader resistance silvered: 4.4 mOhm / m, Leader resistance: 136 pF / m --> always the lines facing diagonally, Inductance: 0,63 µH / m

VIABLUE SC-4 BI-WIRE 150 cm ITEM N° 24310 €.270,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-4 BI-WIRE 300 cm ITEM N° 24315 €.322,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-4 BI-WIRE 500 cm ITEM N° 24322 €.390,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-4 BI-WIRE 800 cm ITEM N° 24330 €.490,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-4 BI-WIRE 1500 cm ITEM N° 24344 €.726,00 Per prezzo scontato TELEFONA/ E-MAIL

Cavi terminti BI-WIRE con ts 6 banane gold gold 2 x8 mm in argento Cavi terminti BI-WIRE con ts 6 banane gold gold 2 x8 mm in argento ultima versione dell' ormai famoso cavo viablue composto da 4 cavi dal diametro di 4 mm² a sua volta composto da sette cavi per un total di 896 fili singoli in puro rame ofc dove il 50% placcato in argento per ottenere un migliore risultato alle alte frequenze mentre il restamte 50% e' dedicato al trasferimento del segnale per le basse frequenze
QUESTI CAVI HANNO BISOGNO DI UN RODAGGIO PER OTTENERE LE MASSIME PRESTAZIONI DI 36 ORE

Definition. Details. Living music.High-End quality. Salient Design. ViaBlue™ Cobra.ViaBlue™ SC-2 Silver Series loudspeaker cables have a combination of silvered braids for the high pass range and tinned braids for the pressureful rendition of the low pass. On the ends the ViaBlue™ T6s Series loudspeaker plug-in connections plated with genuine gold are terminated.SC-2 speaker cables have a transparent and three-dimensional acoustics and a brilliant, airy quality in the high range. Clean lows and basses homogeneously round out the acoustic pattern. Technically, all of the frequency ranges are cleanly and realistically represented and reproduced in a linear fashion.Different materials for different ranges.Both 4 mm2 leads of the SC-2 speaker cable consist of seven-stranded lays with a total of 448 individual wire conductors. In order to customize the sound range for the individual frequency ranges, five strands have genuine silver plating for accurate reproduction of the high range and two strands have pure copper strands for powerful accentuation of the bass.plated strands for powerful playback of the bass range. SC-4 speaker cables have a transparent and three-dimensional sound and a brilliant, airy quality in the high range. Clean lows and basses homogeneously round out the acoustic pattern. Technically, all the frequency ranges are cleanly and realistically represented and reproduced in a linear fashion.Seperate signal lines for high and low pass.The advantage of a bi-wire speaker cable compared to a single-wire speaker cable (e.g. twin speaker cable) is to reduce distortions. When speakers are connected to an amplifier with traditional wiring, distortions are created. This can be caused by vibrations of the woofer thereby creating voltage in the cable. These distortions are not sufficiently eliminated by the amplifier. Some of these distortions are modified on the tweeter, mid-range speaker and woofer. Bi-wiring reduces such distortions. They occur only at the amplifier. There they can be efficiently eliminated by the amplifier control loop. A control loop serves to hold a certain magnitude constant (negative feedback control, scanning by sensing devices, comparison of the values with the reference value, sending a correction signal when there are deviations, whereupon the deviating state is reset to the initial value).Silver plating for more brilliance.The four 4 mm2 leads of the SC-4 more speaker cable consist of ever 7 stranded bundles with altogether 896 individual braids. In order to specialize the sound range for the individual frequency ranges, two of the four veins are silvered and two veins tinned. Through the combination of silver-plated and tin-plated leads, the finest details and brilliance of the treble range as well as the lower frequency signals of the bass range are fully carried and powerfully reproduced through the attached speakers. The two silvered leads are connected with the high tone range of the loudspeakers. By the silver plating finest details will be transfered in the high tone range. The two tinned copper leads are connected with the low range of the loudspeakers. The low-frequency signals are completely transported in base range and shown by the tinning of the copper braids over the attached loudspeakers pressureful.Burned in well.The basic burn-in time of the SC-4 speaker cables is approx. 22-24 hours. The total burn-in time is approx. 42-44 hours. (Exact times depend on temperature and location)Tecnical Dates: 4x4 mm2 lines (je 224 x 0.15 mm), Isolation: PVC, Leader resistance, tinned: 4.6 mOhm / m, Leader resistance silvered: 4.4 mOhm / m, Leader resistance: 136 pF / m --> always the lines facing diagonally, Inductance: 0,63 µH / m

CAVI PER DIFFUSORI TERMINATI BI-AMPLI

Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 info@sinergy.us

VIABLUE SC-4 BI-AMPLI 150 cm ITEM N° 24560 €.176,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-4 BI- AMPLI 300 cm ITEM N° 24565 €.220,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-4 BI-AMPLI 500 cm ITEM N° 24572 €.290,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-4 BI- AMPLI 800 cm ITEM N° 24580 €.390,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-4 BI- AMPLI1500 cm ITEM N° 24594 €.650,00 Per prezzo scontato TELEFONA/ E-MAIL

Definition. Details. Living music.High-End quality. Salient Design. ViaBlue™ Cobra.ViaBlue™ SC-2 Silver Series loudspeaker cables have a combination of silvered braids for the high pass range and tinned braids for the pressureful rendition of the low pass. On the ends the ViaBlue™ T6s Series loudspeaker plug-in connections plated with genuine gold are terminated.SC-2 speaker cables have a transparent and three-dimensional acoustics and a brilliant, airy quality in the high range. Clean lows and basses homogeneously round out the acoustic pattern. Technically, all of the frequency ranges are cleanly and realistically represented and reproduced in a linear fashion.Different materials for different ranges.Both 4 mm2 leads of the SC-2 speaker cable consist of seven-stranded lays with a total of 448 individual wire conductors. In order to customize the sound range for the individual frequency ranges, five strands have genuine silver plating for accurate reproduction of the high range and two strands have pure copper strands for powerful accentuation of the bass.plated strands for powerful playback of the bass range. SC-4 speaker cables have a transparent and three-dimensional sound and a brilliant, airy quality in the high range. Clean lows and basses homogeneously round out the acoustic pattern. Technically, all the frequency ranges are cleanly and realistically represented and reproduced in a linear fashion.Seperate signal lines for high and low pass.The advantage of a bi-wire speaker cable compared to a single-wire speaker cable (e.g. twin speaker cable) is to reduce distortions. When speakers are connected to an amplifier with traditional wiring, distortions are created. This can be caused by vibrations of the woofer thereby creating voltage in the cable. These distortions are not sufficiently eliminated by the amplifier. Some of these distortions are modified on the tweeter, mid-range speaker and woofer. Bi-wiring reduces such distortions. They occur only at the amplifier. There they can be efficiently eliminated by the amplifier control loop. A control loop serves to hold a certain magnitude constant (negative feedback control, scanning by sensing devices, comparison of the values with the reference value, sending a correction signal when there are deviations, whereupon the deviating state is reset to the initial value).Silver plating for more brilliance.The four 4 mm2 leads of the SC-4 more speaker cable consist of ever 7 stranded bundles with altogether 896 individual braids. In order to specialize the sound range for the individual frequency ranges, two of the four veins are silvered and two veins tinned. Through the combination of silver-plated and tin-plated leads, the finest details and brilliance of the treble range as well as the lower frequency signals of the bass range are fully carried and powerfully reproduced through the attached speakers. The two silvered leads are connected with the high tone range of the loudspeakers. By the silver plating finest details will be transfered in the high tone range. The two tinned copper leads are connected with the low range of the loudspeakers. The low-frequency signals are completely transported in base range and shown by the tinning of the copper braids over the attached loudspeakers pressureful.Burned in well.The basic burn-in time of the SC-4 speaker cables is approx. 22-24 hours. The total burn-in time is approx. 42-44 hours. (Exact times depend on temperature and location)Tecnical Dates: 4x4 mm2 lines (je 224 x 0.15 mm), Isolation: PVC, Leader resistance, tinned: 4.6 mOhm / m, Leader resistance silvered: 4.4 mOhm / m, Leader resistance: 136 pF / m --> always the lines facing diagonally, Inductance: 0,63 µH / m

VIABLUE SC-4 BI-AMPLI 150 cm ITEM N° 24860 €.284,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-4 BI- AMPLI 300 cm ITEM N° 24865 €.335,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-4 BI-AMPLI 500 cm ITEM N° 24872 €.400,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-4 BI- AMPLI 800 cm ITEM N° 24880 €.500,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-4 BI- AMPLI1500 cm ITEM N° 24894 €.738,00 Per prezzo scontato TELEFONA/ E-MAIL

Definition. Details. Living music.High-End quality. Salient Design. ViaBlue™ Cobra.ViaBlue™ SC-2 Silver Series loudspeaker cables have a combination of silvered braids for the high pass range and tinned braids for the pressureful rendition of the low pass. On the ends the ViaBlue™ T6s Series loudspeaker plug-in connections plated with genuine gold are terminated.SC-2 speaker cables have a transparent and three-dimensional acoustics and a brilliant, airy quality in the high range. Clean lows and basses homogeneously round out the acoustic pattern. Technically, all of the frequency ranges are cleanly and realistically represented and reproduced in a linear fashion.Different materials for different ranges.Both 4 mm2 leads of the SC-2 speaker cable consist of seven-stranded lays with a total of 448 individual wire conductors. In order to customize the sound range for the individual frequency ranges, five strands have genuine silver plating for accurate reproduction of the high range and two strands have pure copper strands for powerful accentuation of the bass.plated strands for powerful playback of the bass range. SC-4 speaker cables have a transparent and three-dimensional sound and a brilliant, airy quality in the high range. Clean lows and basses homogeneously round out the acoustic pattern. Technically, all the frequency ranges are cleanly and realistically represented and reproduced in a linear fashion.Seperate signal lines for high and low pass.The advantage of a bi-wire speaker cable compared to a single-wire speaker cable (e.g. twin speaker cable) is to reduce distortions. When speakers are connected to an amplifier with traditional wiring, distortions are created. This can be caused by vibrations of the woofer thereby creating voltage in the cable. These distortions are not sufficiently eliminated by the amplifier. Some of these distortions are modified on the tweeter, mid-range speaker and woofer. Bi-wiring reduces such distortions. They occur only at the amplifier. There they can be efficiently eliminated by the amplifier control loop. A control loop serves to hold a certain magnitude constant (negative feedback control, scanning by sensing devices, comparison of the values with the reference value, sending a correction signal when there are deviations, whereupon the deviating state is reset to the initial value).Silver plating for more brilliance.The four 4 mm2 leads of the SC-4 more speaker cable consist of ever 7 stranded bundles with altogether 896 individual braids. In order to specialize the sound range for the individual frequency ranges, two of the four veins are silvered and two veins tinned. Through the combination of silver-plated and tin-plated leads, the finest details and brilliance of the treble range as well as the lower frequency signals of the bass range are fully carried and powerfully reproduced through the attached speakers. The two silvered leads are connected with the high tone range of the loudspeakers. By the silver plating finest details will be transfered in the high tone range. The two tinned copper leads are connected with the low range of the loudspeakers. The low-frequency signals are completely transported in base range and shown by the tinning of the copper braids over the attached loudspeakers pressureful.Burned in well.The basic burn-in time of the SC-4 speaker cables is approx. 22-24 hours. The total burn-in time is approx. 42-44 hours. (Exact times depend on temperature and location)Tecnical Dates: 4x4 mm2 lines (je 224 x 0.15 mm), Isolation: PVC, Leader resistance, tinned: 4.6 mOhm / m, Leader resistance silvered: 4.4 mOhm / m, Leader resistance: 136 pF / m --> always the lines facing diagonally, Inductance: 0,63 µH / m

VIABLUE SC-4 BI-AMPLI 150 cm ITEM N° 24510 €.308,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-4 BI- AMPLI 300 cm ITEM N° 24515 €.358,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-4 BI-AMPLI 500 cm ITEM N° 24522 €.427,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-4 BI- AMPLI 800 cm ITEM N° 24530 €.526,00 Per prezzo scontato TELEFONA/ E-MAIL

VIABLUE SC-4 BI- AMPLI1500 cm ITEM N° 24524 €.762,00 Per prezzo scontato TELEFONA/ E-MAIL

Cavi terminti BI-WIRE con ts 6 banane gold gold 2 x8 mm in argento ultima versione dell' ormai famoso cavo viablue composto da 4 cavi dal diametro di 4 mm² a sua volta composto da sette cavi per un total di 896 fili singoli in puro rame ofc dove il 50% placcato in argento per ottenere un migliore risultato alle alte frequenze mentre il restamte 50% e' dedicato al trasferimento del segnale per le basse frequenze
QUESTI CAVI HANNO BISOGNO DI UN RODAGGIO PER OTTENERE LE MASSIME PRESTAZIONI DI 36 ORE

Definition. Details. Living music.High-End quality. Salient Design. ViaBlue™ Cobra.ViaBlue™ SC-2 Silver Series loudspeaker cables have a combination of silvered braids for the high pass range and tinned braids for the pressureful rendition of the low pass. On the ends the ViaBlue™ T6s Series loudspeaker plug-in connections plated with genuine gold are terminated.SC-2 speaker cables have a transparent and three-dimensional acoustics and a brilliant, airy quality in the high range. Clean lows and basses homogeneously round out the acoustic pattern. Technically, all of the frequency ranges are cleanly and realistically represented and reproduced in a linear fashion.Different materials for different ranges.Both 4 mm2 leads of the SC-2 speaker cable consist of seven-stranded lays with a total of 448 individual wire conductors. In order to customize the sound range for the individual frequency ranges, five strands have genuine silver plating for accurate reproduction of the high range and two strands have pure copper strands for powerful accentuation of the bass.plated strands for powerful playback of the bass range. SC-4 speaker cables have a transparent and three-dimensional sound and a brilliant, airy quality in the high range. Clean lows and basses homogeneously round out the acoustic pattern. Technically, all the frequency ranges are cleanly and realistically represented and reproduced in a linear fashion.Seperate signal lines for high and low pass.The advantage of a bi-wire speaker cable compared to a single-wire speaker cable (e.g. twin speaker cable) is to reduce distortions. When speakers are connected to an amplifier with traditional wiring, distortions are created. This can be caused by vibrations of the woofer thereby creating voltage in the cable. These distortions are not sufficiently eliminated by the amplifier. Some of these distortions are modified on the tweeter, mid-range speaker and woofer. Bi-wiring reduces such distortions. They occur only at the amplifier. There they can be efficiently eliminated by the amplifier control loop. A control loop serves to hold a certain magnitude constant (negative feedback control, scanning by sensing devices, comparison of the values with the reference value, sending a correction signal when there are deviations, whereupon the deviating state is reset to the initial value).Silver plating for more brilliance.The four 4 mm2 leads of the SC-4 more speaker cable consist of ever 7 stranded bundles with altogether 896 individual braids. In order to specialize the sound range for the individual frequency ranges, two of the four veins are silvered and two veins tinned. Through the combination of silver-plated and tin-plated leads, the finest details and brilliance of the treble range as well as the lower frequency signals of the bass range are fully carried and powerfully reproduced through the attached speakers. The two silvered leads are connected with the high tone range of the loudspeakers. By the silver plating finest details will be transfered in the high tone range. The two tinned copper leads are connected with the low range of the loudspeakers. The low-frequency signals are completely transported in base range and shown by the tinning of the copper braids over the attached loudspeakers pressureful.Burned in well.The basic burn-in time of the SC-4 speaker cables is approx. 22-24 hours. The total burn-in time is approx. 42-44 hours. (Exact times depend on temperature and location)Tecnical Dates: 4x4 mm2 lines (je 224 x 0.15 mm), Isolation: PVC, Leader resistance, tinned: 4.6 mOhm / m, Leader resistance silvered: 4.4 mOhm / m, Leader resistance: 136 pF / m --> always the lines facing diagonally, Inductance: 0,63 µH / m

JUMPER Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 info@sinergy.us

VIABLUE SC-4 J 10 cm ITEM N° 24775 €.58,00 Per ordine TELEFONARE/EMAIL

VIABLUE SC-4 J 15 cm ITEM N° 24780 €.58,00 Per ordine TELEFONARE/EMAIL

JUMPER terminati con crimp sleeves gold 2 x8 mm in argento ultima versione dell' ormai famoso cavo viablue composto da cavi dal diametro di 4 mm² a sua volta composto da sette cavi per un total di 896 fili singoli in puro rame ofc dove il 50% placcato in argento per ottenere un migliore risultato alle alte frequenze mentre il restamte 50% e' dedicato al trasferimento del segnale per le basse frequenze
QUESTI CAVI HANNO BISOGNO DI UN RODAGGIO PER OTTENERE LE MASSIME PRESTAZIONI DI 36 ORE

Definition. Details. Living music.High-End quality. Salient Design. ViaBlue™ Cobra.ViaBlue™ SC-2 Silver Series loudspeaker cables have a combination of silvered braids for the high pass range and tinned braids for the pressureful rendition of the low pass. On the ends the ViaBlue™ T6s Series loudspeaker plug-in connections plated with genuine gold are terminated.SC-2 speaker cables have a transparent and three-dimensional acoustics and a brilliant, airy quality in the high range. Clean lows and basses homogeneously round out the acoustic pattern. Technically, all of the frequency ranges are cleanly and realistically represented and reproduced in a linear fashion.Different materials for different ranges.Both 4 mm2 leads of the SC-2 speaker cable consist of seven-stranded lays with a total of 448 individual wire conductors. In order to customize the sound range for the individual frequency ranges, five strands have genuine silver plating for accurate reproduction of the high range and two strands have pure copper strands for powerful accentuation of the bass.plated strands for powerful playback of the bass range. SC-4 speaker cables have a transparent and three-dimensional sound and a brilliant, airy quality in the high range. Clean lows and basses homogeneously round out the acoustic pattern. Technically, all the frequency ranges are cleanly and realistically represented and reproduced in a linear fashion.Seperate signal lines for high and low pass.The advantage of a bi-wire speaker cable compared to a single-wire speaker cable (e.g. twin speaker cable) is to reduce distortions. When speakers are connected to an amplifier with traditional wiring, distortions are created. This can be caused by vibrations of the woofer thereby creating voltage in the cable. These distortions are not sufficiently eliminated by the amplifier. Some of these distortions are modified on the tweeter, mid-range speaker and woofer. Bi-wiring reduces such distortions. They occur only at the amplifier. There they can be efficiently eliminated by the amplifier control loop. A control loop serves to hold a certain magnitude constant (negative feedback control, scanning by sensing devices, comparison of the values with the reference value, sending a correction signal when there are deviations, whereupon the deviating state is reset to the initial value).Silver plating for more brilliance.The four 4 mm2 leads of the SC-4 more speaker cable consist of ever 7 stranded bundles with altogether 896 individual braids. In order to specialize the sound range for the individual frequency ranges, two of the four veins are silvered and two veins tinned. Through the combination of silver-plated and tin-plated leads, the finest details and brilliance of the treble range as well as the lower frequency signals of the bass range are fully carried and powerfully reproduced through the attached speakers. The two silvered leads are connected with the high tone range of the loudspeakers. By the silver plating finest details will be transfered in the high tone range. The two tinned copper leads are connected with the low range of the loudspeakers. The low-frequency signals are completely transported in base range and shown by the tinning of the copper braids over the attached loudspeakers pressureful.Burned in well.The basic burn-in time of the SC-4 speaker cables is approx. 22-24 hours. The total burn-in time is approx. 42-44 hours. (Exact times depend on temperature and location)Tecnical Dates: 4x4 mm2 lines (je 224 x 0.15 mm), Isolation: PVC, Leader resistance, tinned: 4.6 mOhm / m, Leader resistance silvered: 4.4 mOhm / m, Leader resistance: 136 pF / m --> always the lines facing diagonally, Inductance: 0,63 µH / m

VIABLUE SC-4 J 10 cm ITEM N° 24785 €.82,00 Per ordine TELEFONARE/EMAIL

VIABLUE SC-4 J 15 cm ITEM N° 24790 €.82,00 Per ordine TELEFONARE/EMAIL

JUMPER terminati con ts banane gold 2 x8 mm in argento ultima versione dell' ormai famoso cavo viablue composto da 4 cavi dal diametro di 4 mm² a sua volta composto da sette cavi per un total di 896 fili singoli in puro rame ofc dove il 50% placcato in argento per ottenere un migliore risultato alle alte frequenze mentre il restamte 50% e' dedicato al trasferimento del segnale per le basse frequenze
QUESTI CAVI HANNO BISOGNO DI UN RODAGGIO PER OTTENERE LE MASSIME PRESTAZIONI DI 36 ORE

Definition. Details. Living music.High-End quality. Salient Design. ViaBlue™ Cobra.ViaBlue™ SC-2 Silver Series loudspeaker cables have a combination of silvered braids for the high pass range and tinned braids for the pressureful rendition of the low pass. On the ends the ViaBlue™ T6s Series loudspeaker plug-in connections plated with genuine gold are terminated.SC-2 speaker cables have a transparent and three-dimensional acoustics and a brilliant, airy quality in the high range. Clean lows and basses homogeneously round out the acoustic pattern. Technically, all of the frequency ranges are cleanly and realistically represented and reproduced in a linear fashion.Different materials for different ranges.Both 4 mm2 leads of the SC-2 speaker cable consist of seven-stranded lays with a total of 448 individual wire conductors. In order to customize the sound range for the individual frequency ranges, five strands have genuine silver plating for accurate reproduction of the high range and two strands have pure copper strands for powerful accentuation of the bass.plated strands for powerful playback of the bass range. SC-4 speaker cables have a transparent and three-dimensional sound and a brilliant, airy quality in the high range. Clean lows and basses homogeneously round out the acoustic pattern. Technically, all the frequency ranges are cleanly and realistically represented and reproduced in a linear fashion.Seperate signal lines for high and low pass.The advantage of a bi-wire speaker cable compared to a single-wire speaker cable (e.g. twin speaker cable) is to reduce distortions. When speakers are connected to an amplifier with traditional wiring, distortions are created. This can be caused by vibrations of the woofer thereby creating voltage in the cable. These distortions are not sufficiently eliminated by the amplifier. Some of these distortions are modified on the tweeter, mid-range speaker and woofer. Bi-wiring reduces such distortions. They occur only at the amplifier. There they can be efficiently eliminated by the amplifier control loop. A control loop serves to hold a certain magnitude constant (negative feedback control, scanning by sensing devices, comparison of the values with the reference value, sending a correction signal when there are deviations, whereupon the deviating state is reset to the initial value).Silver plating for more brilliance.The four 4 mm2 leads of the SC-4 more speaker cable consist of ever 7 stranded bundles with altogether 896 individual braids. In order to specialize the sound range for the individual frequency ranges, two of the four veins are silvered and two veins tinned. Through the combination of silver-plated and tin-plated leads, the finest details and brilliance of the treble range as well as the lower frequency signals of the bass range are fully carried and powerfully reproduced through the attached speakers. The two silvered leads are connected with the high tone range of the loudspeakers. By the silver plating finest details will be transfered in the high tone range. The two tinned copper leads are connected with the low range of the loudspeakers. The low-frequency signals are completely transported in base range and shown by the tinning of the copper braids over the attached loudspeakers pressureful.Burned in well.The basic burn-in time of the SC-4 speaker cables is approx. 22-24 hours. The total burn-in time is approx. 42-44 hours. (Exact times depend on temperature and location)Tecnical Dates: 4x4 mm2 lines (je 224 x 0.15 mm), Isolation: PVC, Leader resistance, tinned: 4.6 mOhm / m, Leader resistance silvered: 4.4 mOhm / m, Leader resistance: 136 pF / m --> always the lines facing diagonally, Inductance: 0,63 µH / m

VIABLUE SC-4 J 10 cm ITEM N° 24725 €.106,00 Per ordine TELEFONARE/EMAIL

VIABLUE SC-4 J 15 cm ITEM N° 24730 €.106,00 Per ordine TELEFONARE/EMAIL

JUMPER terminati con ts 6 banane gold 2 x8 mm in argento ultima versione dell' ormai famoso cavo viablue composto da 4 cavi dal diametro di 4 mm² a sua volta composto da sette cavi per un total di 896 fili singoli in puro rame ofc dove il 50% placcato in argento per ottenere un migliore risultato alle alte frequenze mentre il restamte 50% e' dedicato al trasferimento del segnale per le basse frequenze
QUESTI CAVI HANNO BISOGNO DI UN RODAGGIO PER OTTENERE LE MASSIME PRESTAZIONI DI 36 ORE

Definition. Details. Living music.High-End quality. Salient Design. ViaBlue™ Cobra.ViaBlue™ SC-2 Silver Series loudspeaker cables have a combination of silvered braids for the high pass range and tinned braids for the pressureful rendition of the low pass. On the ends the ViaBlue™ T6s Series loudspeaker plug-in connections plated with genuine gold are terminated.SC-2 speaker cables have a transparent and three-dimensional acoustics and a brilliant, airy quality in the high range. Clean lows and basses homogeneously round out the acoustic pattern. Technically, all of the frequency ranges are cleanly and realistically represented and reproduced in a linear fashion.Different materials for different ranges.Both 4 mm2 leads of the SC-2 speaker cable consist of seven-stranded lays with a total of 448 individual wire conductors. In order to customize the sound range for the individual frequency ranges, five strands have genuine silver plating for accurate reproduction of the high range and two strands have pure copper strands for powerful accentuation of the bass.plated strands for powerful playback of the bass range. SC-4 speaker cables have a transparent and three-dimensional sound and a brilliant, airy quality in the high range. Clean lows and basses homogeneously round out the acoustic pattern. Technically, all the frequency ranges are cleanly and realistically represented and reproduced in a linear fashion.Seperate signal lines for high and low pass.The advantage of a bi-wire speaker cable compared to a single-wire speaker cable (e.g. twin speaker cable) is to reduce distortions. When speakers are connected to an amplifier with traditional wiring, distortions are created. This can be caused by vibrations of the woofer thereby creating voltage in the cable. These distortions are not sufficiently eliminated by the amplifier. Some of these distortions are modified on the tweeter, mid-range speaker and woofer. Bi-wiring reduces such distortions. They occur only at the amplifier. There they can be efficiently eliminated by the amplifier control loop. A control loop serves to hold a certain magnitude constant (negative feedback control, scanning by sensing devices, comparison of the values with the reference value, sending a correction signal when there are deviations, whereupon the deviating state is reset to the initial value).Silver plating for more brilliance.The four 4 mm2 leads of the SC-4 more speaker cable consist of ever 7 stranded bundles with altogether 896 individual braids. In order to specialize the sound range for the individual frequency ranges, two of the four veins are silvered and two veins tinned. Through the combination of silver-plated and tin-plated leads, the finest details and brilliance of the treble range as well as the lower frequency signals of the bass range are fully carried and powerfully reproduced through the attached speakers. The two silvered leads are connected with the high tone range of the loudspeakers. By the silver plating finest details will be transfered in the high tone range. The two tinned copper leads are connected with the low range of the loudspeakers. The low-frequency signals are completely transported in base range and shown by the tinning of the copper braids over the attached loudspeakers pressureful.Burned in well.The basic burn-in time of the SC-4 speaker cables is approx. 22-24 hours. The total burn-in time is approx. 42-44 hours. (Exact times depend on temperature and location)Tecnical Dates: 4x4 mm2 lines (je 224 x 0.15 mm), Isolation: PVC, Leader resistance, tinned: 4.6 mOhm / m, Leader resistance silvered: 4.4 mOhm / m, Leader resistance: 136 pF / m --> always the lines facing diagonally, Inductance: 0,63 µH / m

CAVO RCA-RCA

Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 info@sinergy.us

VIABLUE NF-S1 RCA 50 cm ITEM N° 22205 €.130,00 Per ordine TELEFONARE/EMAIL

VIABLUE NF-S1 RCA 100 cm ITEM N° 22208 €.149,00 Per ordine TELEFONARE/EMAIL

VIABLUE NF-S1 RCA 200 cm ITEM N° 22212 €.170,00 Per ordine TELEFONARE/EMAIL

VIABLUE NF-S1 RCA 300 cm ITEM N° 22215 €.180,00 Per ordine TELEFONARE/EMAIL

VIABLUE NF-S1 RCA 500 cm ITEM N° 22222 €.230,00 Per ordine TELEFONARE/EMAIL

VIABLUE NF-S1 RCA 800 cm ITEM N° 22230 €.300,00 Per ordine TELEFONARE/EMAIL

Cavo Viablue rca /rca mono con connettori dorati ts6 e cavo in argento ns1 prezzo per coppia cavi

Original-faithful music rendition.Linearity. Complete frequency spectrum. ViaBlue™ NF-S1 RCA interconnects yield music with faithful reproduction at all frequencies. The sound is completely linear and undistorted. The silver-plating of both screens makes it possible to perceive even the most subtle musical variations in the high-frequency range with hi-fidelity. The goal is to play back music the same way it was recorded - with no distortions. NF-S1 performs this task exceptionally well.NF-S1 interconnects are available as mono and stereo cables. The function is identical. With the mono version you get one pair of two single cables. The stereo version has the two single cables in one sleeving so it's more comfortable to handle when you got many cables.Shielded. Quadruple. The balanced construction has two inner tin-plated 0.5 mm2 copper wires with 19 individual strands (19 x 0.185 mm) and polyethylene insulation. Two twisted PVC insulators are used as fillers. The Quattro Silver Shield multiple screening has two ALU-PETP films and two silver-plated spiral wrap screens running in opposite directions with fine 0.15 mm strands. There is a felt layer between the screen and the outer cladding to protect the outer silver screen. NF-S1 has an outside diameter of 8 mm.

VIABLUE NF-S1 RCA 50 cm ITEM N° 22255 €.130,00 Per ordine TELEFONARE/EMAIL

VIABLUE NF-S1 RCA 100 cm ITEM N° 22258 €.149,00 Per ordine TELEFONARE/EMAIL

VIABLUE NF-S1 RCA 200 cm ITEM N° 22262 €.170,00 Per ordine TELEFONARE/EMAIL

VIABLUE NF-S1 RCA 300 cm ITEM N° 22265 €.180,00 Per ordine TELEFONARE/EMAIL

VIABLUE NF-S1 RCA 500 cm ITEM N° 22272 €.230,00 Per ordine TELEFONARE/EMAIL

VIABLUE NF-S1 RCA 800 cm ITEM N° 22280 €.300,00 Per ordine TELEFONARE/EMAIL

Cavo Viablue rca /rca stereo con connettori dorati ts6 e cavo in argento ns1

CAVI RCA/RCA DIGITALETelefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 info@sinergy.us

VIABLUE NF-75 50 cm ITEM N° 22905 €.68,00 Per ordine TELEFONARE/EMAIL

VIABLUE NF-75 100 cm ITEM N° 22908 €.73,00 Per ordine TELEFONARE/EMAIL

VIABLUENF-75 250 cm ITEM N° 22914 €.87,00 Per ordine TELEFONARE/EMAIL

VIABLUE NF-75 500 cm ITEM N° 22922 €.110,00 Per ordine TELEFONARE/EMAIL

VIABLUE NF-75 800 cm ITEM N° 22930 €.138,00 Per ordine TELEFONARE/EMAIL

VIABLUE NF-75 1000 cm ITEM N° 22934 €.158,00 Per ordine TELEFONARE/EMAIL

VIABLUE NF-75 1500 cm ITEM N° 22944 €.205,00 Per ordine TELEFONARE/EMAIL

S/PDIF. 75 Ohm. 100% Abschirmung durch ViaBlue™ Silver-Shield.ViaBlue™ NF-75 Silver Digital Cinchkabel sind koaxiale High-End-Digitalkabel mit idealen elektrischen Werten. Sie ermöglichen die fehlerfreie und korrekte Übertragung von digitalen Signalen. Über die Grundvoraussetzung von 75 Ohm Wellenwiderstand werden als technische Feinheiten ein geschäumtes Foam Polyethylen Dielektrikum sowie eine versilberte Abschirmung verwendet. Dies führt zu extrem niedrigen Widerstandswerten und somit zu maximalen Übertragungsgeschwindigkeiten von elektrischen Digitalsignalen. Durch das ViaBlue™ Silver Shield haben NF-75 Cinchkabel eine hundertprozentig flächendeckende Abschirmung vor elektrischen Störfeldern. Die Abschirmung setzt sich aus einem Aluminiumfolienschirm und einem versilberten Geflechtschirm zusammen.Konfektioniert mit Cinchsteckern. NF-75 Silver Digital Cinchkabel sind konfektioniert mit ViaBlue™ T6s Cinchsteckern, die einen Bronzepin mit einer echtvergoldeten 24 Karat Legierung haben. Umflochten sind die NF-75 Silver Digitalkabel mit dem ViaBlue™ Cobra-Schutzgewebe. Eingebaute Mantelstromfilter entfernen die bei Koaxialkabeln auftretenden Innen-/Zwischenströme von Leiter und Schirmung.Digital Speed in a digital World. Ohne Kompromisse. Maximale Geschwindigkeit. Fehlerfrei.ViaBlue™ NF-75 Silver Digitalkabel sind koaxiale High-End-Digitalkabel mit idealen elektrischen Werten. Sie ermöglichen die fehlerfreie und korrekte Übertragung von digitalen Signalen.Über eine Grundvoraussetzung von einem 75 Ohm Wellenwiderstand werden weiterhin als technische Feinheiten ein geschäumtes Foam Polyethylen Dielektrikum sowie eine versilberte Abschirmung verwendet. Dies führt zu extrem niedrigen Widerstandswerten und somit zu maximalen Übertragungsgeschwindigkeiten von elektrischen Digitalsignalen.Durch das ViaBlue™ Silver Shield haben NF-75 interconnect eine hunderprozentig flächendeckende Abschirmung vor elektrischen Störfeldern. Die Abschirmung setzt sich aus einem Aluminiumfolienschirm und einem versilberten Geflechtschirm zusammen.

CAVO SUBWOOFERTelefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 info@sinergy.us

VIABLUE NF-B SUB 100 cm ITEM N° 22808 €.72,00 Per ordine TELEFONARE/EMAIL

VIABLUE NF-B SUB 250 cm ITEM N° 22814 €.85,00 Per ordine TELEFONARE/EMAIL

VIABLUE NF-B SUB 500 cm ITEM N° 22822 €.110,00 Per ordine TELEFONARE/EMAIL

VIABLUE NF-B SUB 800 cm ITEM N° 22830 €.138,00 Per ordine TELEFONARE/EMAIL

VIABLUE NF-B SUB 1500 cm ITEM N° 22844 €.205,00 Per ordine TELEFONARE/EMAIL

Cavo Viablue rca /rca mono con connettori dorati ts6 e cavo in argento nsb

Feeling the base.Particularly for subwoofers.NF-B subwoofer interconnects are specially designed LF cables which play the bass range with full acoustic power and pressure. The capacitance between inner conductor and screen is maximized by a very thick inner conductor. LDPE thermoplastic is used as insulation, thus increasing the capacitance even further for the same dimensions. This results in capacitive values of 128 pF/m.ViaBlue™ NF-B interconnects have been developed specifically for connecting subwoofers. Because the signal transfer focuses on the bass range it receives maximum boost so that the signal power is not degraded even over longer signal paths. Consequently, the subwoofers can be positioned to make the most of the room acoustics.The extremely thick inner conductor of the NF-B subwoofer interconnect creates a high acoustic pressure for subwoofers. The triple shield constructed from a double, reverse spiral wound sheath and the LDPE semi-conducting layer shields the massive inner conductor.

CAVI BILANCIATI XLR

Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 info@sinergy.us

VIABLUE NF-S1 XLR 50 cm ITEM N° 22305 €.139,90 Per ordine TELEFONARE/EMAIL

VIABLUE NF-S1 XLR 100 cm ITEM N° 22308 €.149,90 Per ordine TELEFONARE/EMAIL

VIABLUE NF-S1 XLR 200 cm ITEM N° 22312 €.169,00 Per ordine TELEFONARE/EMAIL

VIABLUE NF-S1 XLR 300 cm ITEM N° 22315 €.189,00 Per ordine TELEFONARE/EMAIL

VIABLUE NF-S1 XLR 500 cm ITEM N° 22322 €.229,00 Per ordine TELEFONARE/EMAIL

VIABLUE NF-S1 XLR 800 cm ITEM N° 22330 €.289,00 Per ordine TELEFONARE/EMAIL

XLR-Kabel mit Versilberung.Analoges Audio-XLR-Kabel für komplette Übertragung aller Frequenzen.High-Tech pur: Dual-Leiter. Zwei Versilberungen. Vier Abschirmungen.Der symmetrische Aufbau des NF-S1 hat zwei verzinnte 0.5 mm2 Kupferinnenleiter mit je 19 Einzellitzen (19 x 0.185 mm) sowie Polyethylen-Isolierungen. Als Füller werden zwei verseilte PVC Isolatoren verwendet. Die vierfache Abschirmung "Quattro Silver Shield" hat zwei ALU-PETP Folien und zwei gegenläufige, versilberte Spiralschirme mit feinen 0.15 mm Einzeldrähten. Zum Schutz des äusseren Silver-Shields ist eine Vliesfolie zwischen Schirm und Außenmantel vorhanden. Das konfektionierte NF-S1 hat einen Außendurchmesser von 9 mm.Konfektioniert mit XLR-Steckern.NF-S1 Cinchkabel sind konfektioniert mit ViaBlue™ T6s Cinchsteckern, die Bronzepins mit einer echtvergoldeten 24 Karat Legierung haben. Umflochten sind die NF-S1 XLR-Kabel mit dem ViaBlue™ Cobra-Schutzgewebe. NF-S1 XLR-Kabel sind als Mono- und Stereovariante erhältlich. Von der Funktionalität sind die Kabel identisch, jedoch ist die in einem Schlauch geführte Stereovariante (Abbildungen in der Galerie) vorteilhaft wenn man mehrere Kabel verwendet weil man ein Stereokabel hat. Die Monovariante (oben abgebildet) hat jeweils zwei Einzelkabel.BEZEICHNUNG: • NF-S1 XLR AUSSENDURCHMESSER • MONO: 2X 9 MM | STEREO: 1X 18 MM ABSCHIRMUNGEN: • 4 (2X WENDELS. / 2X FOLIENS.)STECKER: • T6s XLR-STECKER VEREDELUNGEN: • VERSILBERT / VERZINNT KAPAZITÄT: • LEITER: 50pF/M | SCHIRM: 100 pF/M VERPACKUNGSEINHEIT: • MONO: 1 PAAR | STEREO: 1 STÜCK KENNZEICHNUNG: • SCHWARZ / ROT EINSPIELZEIT • CA. 22 STUNDEN

VIABLUE NF-S1 XLR 50 cm ITEM N° 22355 €.139,90 Per ordine TELEFONARE/EMAIL

VIABLUE NF-S1 XLR 100 cm ITEM N° 22358 €.149,90 Per ordine TELEFONARE/EMAIL

VIABLUE NF-S1 XLR 200 cm ITEM N°22362 €.169,00 Per ordine TELEFONARE/EMAIL

VIABLUE NF-S1 XLR 300 cm ITEM N° 22365 €.189,00 Per ordine TELEFONARE/EMAIL

VIABLUE NF-S1 XLR 500 cm ITEM N° 22372 €.229,00 Per ordine TELEFONARE/EMAIL

VIABLUE NF-S1 XLR 800 cm ITEM N° 22380 €.289,00 Per ordine TELEFONARE/EMAIL

XLR-Kabel mit Versilberung.Analoges Audio-XLR-Kabel für komplette Übertragung aller Frequenzen.High-Tech pur: Dual-Leiter. Zwei Versilberungen. Vier Abschirmungen.Der symmetrische Aufbau des NF-S1 hat zwei verzinnte 0.5 mm2 Kupferinnenleiter mit je 19 Einzellitzen (19 x 0.185 mm) sowie Polyethylen-Isolierungen. Als Füller werden zwei verseilte PVC Isolatoren verwendet. Die vierfache Abschirmung "Quattro Silver Shield" hat zwei ALU-PETP Folien und zwei gegenläufige, versilberte Spiralschirme mit feinen 0.15 mm Einzeldrähten. Zum Schutz des äusseren Silver-Shields ist eine Vliesfolie zwischen Schirm und Außenmantel vorhanden. Das konfektionierte NF-S1 hat einen Außendurchmesser von 9 mm.Konfektioniert mit XLR-Steckern.NF-S1 Cinchkabel sind konfektioniert mit ViaBlue™ T6s Cinchsteckern, die Bronzepins mit einer echtvergoldeten 24 Karat Legierung haben. Umflochten sind die NF-S1 XLR-Kabel mit dem ViaBlue™ Cobra-Schutzgewebe. NF-S1 XLR-Kabel sind als Mono- und Stereovariante erhältlich. Von der Funktionalität sind die Kabel identisch, jedoch ist die in einem Schlauch geführte Stereovariante (Abbildungen in der Galerie) vorteilhaft wenn man mehrere Kabel verwendet weil man ein Stereokabel hat. Die Monovariante (oben abgebildet) hat jeweils zwei Einzelkabel.BEZEICHNUNG: • NF-S1 XLR AUSSENDURCHMESSER • MONO: 2X 9 MM | STEREO: 1X 18 MM ABSCHIRMUNGEN: • 4 (2X WENDELS. / 2X FOLIENS.)STECKER: • T6s XLR-STECKER VEREDELUNGEN: • VERSILBERT / VERZINNT KAPAZITÄT: • LEITER: 50pF/M |SCHIRM: 100 pF/M VERPACKUNGSEINHEIT: • MONO: 1 PAAR | STEREO: 1 STÜCK KENNZEICHNUNG: • SCHWARZ / ROT EINSPIELZEIT • CA. 22 STUNDEN

CAVI XLR/XLR DIGITALE

Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 info@sinergy.us

VIABLUE NF-S2 50 cm ITEM N° 22405 €.92,00 Per ordine TELEFONARE/EMAIL

VIABLUE NF-S2 100 cm ITEM N° 22408 €.95,00 Per ordine TELEFONARE/EMAIL

VIABLUENF-S2 250 cm ITEM N° 22414 €.110,00 Per ordine TELEFONARE/EMAIL

VIABLUE NF-S2 500 cm ITEM N° 22422 €.134,00 Per ordine TELEFONARE/EMAIL

VIABLUE NF-S2 800 cm ITEM N° 22430 €.162,00 Per ordine TELEFONARE/EMAIL

VIABLUE NF-S2 1000 cm ITEM N° 22434 €.182,00 Per ordine TELEFONARE/EMAIL

VIABLUE NF-S2 1500 cm ITEM N° 22444 €.230,00 Per ordine TELEFONARE/EMAIL

XLR Digital. Symmetrische Verbindung. Digitalsignale fehlerlos. Versilbertes High-End-Digitalkabel. AES / EBU. 110 Ohm. 100% Abschirmung durch ViaBlue™ Silver-Shield. ViaBlue™ NF-S2 Kabel sind symmetrische Digitalkabel mit einem Wellenwiderstand von 110 Ohm. Sie sind AES / EBU sowie DMX512 konform. Der symmetrische Aufbau des NF-S2 hat zwei verzinnte 0.5 mm2 Kupferinnenleiter mit je 19 Einzellitzen (19 x 0.185 mm) sowie Polyethylen-Isolierungen. Als Füller werden zwei verseilte PVC Isolatoren verwendet.Die doppelte Abschirmung hat einen ALU-PETP Folienschirm und einen versilberten Spiralschirm mit feinen 0.15 mm Einzeldrähten. Zum Schutz des versilberten Abschirmung ist eine Vliesfolie zwischen Schirm und Außenmantel vorhanden. Das konfektionierte NF-S2 hat einen Außendurchmesser von 9 mm.Konfektioniert mit XLR-Steckern. NF-S2 XLR Kabel sind konfektioniert mit ViaBlue™ T6s XLR Steckverbindungen, die Bronzekontakte mit einer echtvergoldeten 24 Karat Legierung haben. Umflochten sind die NF-S2 XLR-Kabel mit dem ViaBlue™ Cobra-Schutzgewebe. 100% Digital. 100% Signal.Fehlerfreie Übertragung auf allen Distanzen.ViaBlue™ NF-S2 Kabel sind symmetrische Digitalkabel mit einem Wellenwiderstand von 110 Ohm. Sie sind AES / EBU sowie DMX512 konform. Sie haben zwei verzinnte 0.5 mm2 Kupferinnenleiter mit je 19 Einzellitzen (19 x 0.185 mm) sowie Polyethylen-Isolierungen. Als Füller werden zwei verseilte PVC Isolatoren verwendet.Die doppelte Abschirmung "Double Silver Shield" hat einen ALU-PETP Folienschirm und einen versilberten Spiralschirm mit feinen 0.15 mm Einzeldrähten. Zum Schutz des versilberten Abschirmung ist eine Vliesfolie zwischen Schirm und Aussenmantel vorhanden. Das NF-S2 hat einen Aussendurchmesser von 8 mm.

CONNETTORI

Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 info@sinergy.us

VIABLUE T6S PLUG €.48,00 Per ordine TELEFONARE/EMAIL

Set di 4 pezzi 12,00 euro cadauno Il Viablue TS6 Banana da saldare è realizzato in bronzo placcato oro 24K. Il corpo esterno è in alluminio anodizzato nero, il diamtro max del cavo accettato è di 9,5 mm ma in dotazione vi sono 2 anelli adattatori per ridurre questo diametro sino a 4,5 mm

ITEM NO.30106 End in the highest class.Minimum resistance. Maximum quality.ViaBlue™ T6s bananas plugs have contact pins made of bronze which are 24 carat gold-plated. The shells are made of aluminum. Cables up to 9.5 mm diameters can be installed. All connectors of the T6s series are supplied including two diameter decreasers. Those diameter decreasers make an assembly of cables with small and big diameter possible and grant a firm strain relief.All contacts exchangeable.For the assembly the stripped cable ends are soldered at the contact parts of the T6s plugs. The contact part can be removed completely from the plug's shell. The M4 screw serves as strain relief. The shell for all plugs (exception: XLR plugs) of the ViaBlue™ T6s series is identical. Only the contact parts change.Flexibly applicable. For all cable diameters. Each T6s plug contains two diameter decreasers which serve for a firm strain relief and centric adjustment of the cables. The small diameter decreaser has an outter diameter of 7.5 mm and an inner diameter of 4.5 mm. Thus cables with an outter diameter of 3 mm up to 4.5 mm can be fixed firmly. The big diameter decreaser has an outter diameter of 9.5 mm and an inner diameter of 7.5 mm. Thus cables with an outter diameter from 5 mm to 7.5 mm can be fixed firmly. Without using any diameter decreaser cables with diameters from 7.5 mm to 9.5 mm can be installed.

VIABLUE T6S SPADES €.48,00 Per ordine TELEFONARE/EMAIL

Set di 4 pezzi 12,00 euro cadauno

ITEM NO.30226 High-End in the highest class.Minimum resistance. Maximum quality.ViaBlue™ T6s spades plug have 24 carat gold-plated contacts. The shells are made of aluminum. Cables up to 9.5 mm diameters can be installed. All connectors of the T6s series are supplied including two diameter decreasers. Those diameter decreasers make an assembly of cables with small and big diameter possible and grant a firm strain relief.All contacts exchangeable.For the assembly the stripped cable ends are soldered at the contact parts of the T6s plugs. The contact part can be removed completely from the plug's shell. The M4 screw serves as strain relief. The shell for all plugs (exception: XLR plugs) of the ViaBlue™ T6s series is identical. Only the contact parts change.Flexibly applicable. For all cable diameters.Each T6s plug contains two diameter decreasers which serve for a firm strain relief and centric adjustment of the cables. The small diameter decreaser has an outter diameter of 7.5 mm and an inner diameter of 4.5 mm. Thus cables with an outter diameter of 3 mm up to 4.5 mm can be fixed firmly. The big diameter decreaser has an outter diameter of 9.5 mm and an inner diameter of 7.5 mm. Thus cables with an outter diameter from 5 mm to 7.5 mm can be fixed firmly. Without using any diameter decreaser cables with diameters from 7.5 mm to 9.5 mm can be installed

VIABLUE T6S SPADES €.48,00 Per ordine TELEFONARE/EMAIL

Set di 4 pezzi 12,00 euro cadauno

ITEM NO.30216 High-End in the highest class.Minimum resistance. Maximum quality.ViaBlue™ T6s flexible pins have 24 gold-plated wires. The shells are made of aluminum. Cables up to 9.5 mm diameters can be installed. All connectors of the T6s series are supplied including two diameter decreasers. Those diameter decreasers make an assembly of cables with small and big diameter possible and grant a firm strain relief.All contacts exchangeable.For the assembly the stripped cable ends are soldered at the contact parts of the T6s plugs. The contact part can be removed completely from the plug's shell. The M4 screw serves as strain relief. The shell for all plugs (exception: XLR plugs) of the ViaBlue™ T6s series is identical. Only the contact parts change.Flexibly applicable. For all cable diameters.Each T6s plug contains two diameter decreasers which serve for a firm strain relief and centric adjustment of the cables. The small diameter decreaser has an outter diameter of 7.5 mm and an inner diameter of 4.5 mm. Thus cables with an outter diameter of 3 mm up to 4.5 mm can be fixed firmly. The big diameter decreaser has an outter diameter of 9.5 mm and an inner diameter of 7.5 mm. Thus cables with an outter diameter from 5 mm to 7.5 mm can be fixed firmly. Without using any diameter decreaser cables with diameters from 7.5 mm to 9.5 mm can be installed.

VIABLUE TS PLUG €.38,00 Per ordine TELEFONARE/EMAIL

ITEM NO.30200 TS High-End connectors with isolation.For every system the fitting contact.The ViaBlue™ TS Series was designed to provide a connector ideally suited for every possible connection and jack type. All TS connectors protect against short-circuiting with a transparent insulation bushing. The opening to the cable receiver of the TS plug is 5 mm wide so that cables of up to 8 mm2 can be installed.ViaBlue™ TS banana plugs establish contact to speaker jacks with a classical laminated system. On a circle are distributed nine small copper leaf springs divided into 40° sections. The diameter of the concentric ring in its fully extended state is 5 mm and in its fully stressed state 4 mm. The contact surface to the speaker jacks is added up from the nine pressure points of the concentric ring.To select the appropriate TS plug-in connections, it is helpful to download the data sheet. When printed out, the drawings are represented on a 1:1 scale with respect to the original size: download datasheet ViaBlue™ TS connectorsSpeaker cables can be very easily and comfortably installed in ViaBlue™ TS plugs. To do this, you will need a stripping tool to strip the cable's insulation as well as a screwdriver (hexagon socket 1.5) to fasten the cable in the plug-in connections.The speaker cable should be stripped approx. 8 mm and then plugged tightly into the internal housing of the TS plug-in connectors. This inner part of the TS plug-in connectors narrows in such a way that the influx of air is cut off. In this way, the stranded conductors are protected from oxidation. The cable can be comfortably tightened by the two large fixing screws and therefore has a very strong grip on the plug. Solder is not necessary.In order to protect even better the sensitive stranded conductors of a high-quality speaker cable from possible stripping by the screwing, as well as against oxidation over the long term, it is advisable to use the ViaBlue™ OFC copper crimp sleeves.

VIABLUE TS2 PLUG €.38,00 Per ordine TELEFONARE/EMAIL

ITEM NO.302005 TS High-End connectors with isolation.For every system the fitting contact.The ViaBlue™ TS Series was designed to provide a connector ideally suited for every possible connection and jack type. All TS connectors protect against short-circuiting with a transparent insulation bushing. The opening to the cable receiver of the TS plug is 5 mm wide so that cables of up to 8 mm2 can be installed.ViaBlue TS2 banana plugs establish contact to the speaker jacks with a split tube system. When plugging the TS2 banana plug into speaker jacks, a cut-off sinusoidal line shape cylinder creates a steady, constant pressure over the entire gripping surface, which creates optimal surface contact and ensures an extremely firm hold of the banana plug.To select the appropriate TS plug-in connections, it is helpful to download the data sheet. When printed out, the drawings are represented on a 1:1 scale with respect to the original size: download datasheet ViaBlue™ TS connectorsSpeaker cables can be very easily and comfortably installed in ViaBlue™ TS plugs. To do this, you will need a stripping tool to strip the cable's insulation as well as a screwdriver (hexagon socket 1.5) to fasten the cable in the plug-in connections.The speaker cable should be stripped approx. 8 mm and then plugged tightly into the internal housing of the TS plug-in connectors. This inner part of the TS plug-in connectors narrows in such a way that the influx of air is cut off. In this way, the stranded conductors are protected from oxidation. The cable can be comfortably tightened by the two large fixing screws and therefore has a very strong grip on the plug. Solder is not necessary.In order to protect even better the sensitive stranded conductors of a high-quality speaker cable from possible stripping by the screwing, as well as against oxidation over the long term, it is advisable to use the ViaBlue™ OFC copper crimp sleeves.

VIABLUE TS SPADES 6mm €.28,00 Per ordine TELEFONARE/EMAIL

Set di 4 pezzi -Viablue TSS 8 Connettore forcella HIGH QUALITY, isolato e placcato in oro. forcella 6mm Doppia vite di fissaggio. Accetta cavi fino a 8 mmq versione cadauna sfusa 5,40 euro cad.
ITEM NO.30220 TS High-End connectors with isolation.For every system the fitting contact.The ViaBlue™ TS Series was designed to provide a connector ideally suited for every possible connection and jack type. All TS connectors protect against short-circuiting with a transparent insulation bushing. The opening to the cable receiver of the TS plug is 5 mm wide so that cables of up to 8 mm2 can be installed.ViaBlue TS spades are screwed on to speaker jacks and thus establish constant firm contact between speaker cables and terminals. The gap distance of the respective prongs is 6 mm. There are two different types with different fork sizes, the interior distance of the two fork points amounts to 6 mm and 8 mm.To select the appropriate TS plug-in connections, it is helpful to download the data sheet. When printed out, the drawings are represented on a 1:1 scale with respect to the original size: download datasheet ViaBlue™ TS connectorsSpeaker cables can be very easily and comfortably installed in ViaBlue™ TS plugs. To do this, you will need a stripping tool to strip the cable's insulation as well as a screwdriver (hexagon socket 1.5) to fasten the cable in the plug-in connections.The speaker cable should be stripped approx. 8 mm and then plugged tightly into the internal housing of the TS plug-in connectors. This inner part of the TS plug-in connectors narrows in such a way that the influx of air is cut off. In this way, the stranded conductors are protected from oxidation. The cable can be comfortably tightened by the two large fixing screws and therefore has a very strong grip on the plug. Solder is not necessary.In order to protect even better the sensitive stranded conductors of a high-quality speaker cable from possible stripping by the screwing, as well as against oxidation over the long term, it is advisable to use the ViaBlue™ OFC copper crimp sleeves.

VIABLUE TSSPADES 8mm €.28,00 Per sconto TELEFONARE/EMAIL

Set di 4 pezzi -Viablue TSS 8 Connettore forcella HIGH QUALITY, isolato e placcato in oro. forcella 8mm Doppia vite di fissaggio. Accetta cavi fino a 8 mmq versione cadauna sfusa 5,40 euro cad.
ITEM NO.30225 TS High-End connectors with isolation.For every system the fitting contact.The ViaBlue™ TS Series was designed to provide a connector ideally suited for every possible connection and jack type. All TS connectors protect against short-circuiting with a transparent insulation bushing. The opening to the cable receiver of the TS plug is 5 mm wide so that cables of up to 8 mm2 can be installed.ViaBlue TS spades are screwed on to speaker jacks and thus establish constant firm contact between speaker cables and terminals. The gap distance of the respective prongs is 8 mm. There are two different types with different fork sizes, the interior distance of the two fork points amounts to 8 mm and 8 mm.To select the appropriate TS plug-in connections, it is helpful to download the data sheet. When printed out, the drawings are represented on a 1:1 scale with respect to the original size: download datasheet ViaBlue™ TS connectorsSpeaker cables can be very easily and comfortably installed in ViaBlue™ TS plugs. To do this, you will need a stripping tool to strip the cable's insulation as well as a screwdriver (hexagon socket 1.5) to fasten the cable in the plug-in connections.The speaker cable should be stripped approx. 8 mm and then plugged tightly into the internal housing of the TS plug-in connectors. This inner part of the TS plug-in connectors narrows in such a way that the influx of air is cut off. In this way, the stranded conductors are protected from oxidation. The cable can be comfortably tightened by the two large fixing screws and therefore has a very strong grip on the plug. Solder is not necessary.In order to protect even better the sensitive stranded conductors of a high-quality speaker cable from possible stripping by the screwing, as well as against oxidation over the long term, it is advisable to use the ViaBlue™ OFC copper crimp sleeves.

VIABLUE T6S RCA €.59,00 Per ordine TELEFONARE/EMAIL

Set di 4 pezzi

ITEM NO.30506 High-End in the highest class.Minimum resistance. Maximum quality.ViaBlue™ T6s rca plugs have contact pins made of bronze which are 24 carat gold-plated. The shells are made of aluminum. Cables up to 9.5 mm diameters can be installed. All connectors of the T6s series are supplied including two diameter decreasers. Those diameter decreasers make an assembly of cables with small and big diameter possible and grant a firm strain relief.All contacts exchangeable.For the assembly the stripped cable ends are soldered at the contact parts of the T6s plugs. The contact part can be removed completely from the plug's shell. The M4 screw serves as strain relief. The shell for all plugs (exception: XLR plugs) of the ViaBlue™ T6s series is identical. Only the contact parts change.Flexibly applicable. For all cable diameters.Each T6s plug contains two diameter decreasers which serve for a firm strain relief and centric adjustment of the cables. The small diameter decreaser has an outter diameter of 7.5 mm and an inner diameter of 4.5 mm. Thus cables with an outter diameter of 3 mm up to 4.5 mm can be fixed firmly. The big diameter decreaser has an outter diameter of 9.5 mm and an inner diameter of 7.5 mm. Thus cables with an outter diameter from 5 mm to 7.5 mm can be fixed firmly. Without using any diameter decreaser cables with diameters from 7.5 mm to 9.5 mm can be installed.

VIABLUE T6S RCA €.59,00 Per ordine TELEFONARE/EMAIL

VERSIONE CON AGGANCIO CAVO A BRUGOLA -Set di 4 pezzi

ITEM NO.30510 High-End in the highest class.Minimum resistance. Maximum quality.ViaBlue™ T6s rca plugs have contact pins made of bronze which are 24 carat gold-plated. The shells are made of aluminum. Cables up to 9.5 mm diameters can be installed. All connectors of the T6s series are supplied including two diameter decreasers. Those diameter decreasers make an assembly of cables with small and big diameter possible and grant a firm strain relief.All contacts exchangeable.For the assembly the stripped cable ends are soldered at the contact parts of the T6s plugs. The contact part can be removed completely from the plug's shell. The M4 screw serves as strain relief. The shell for all plugs (exception: XLR plugs) of the ViaBlue™ T6s series is identical. Only the contact parts change.Flexibly applicable. For all cable diameters.Each T6s plug contains two diameter decreasers which serve for a firm strain relief and centric adjustment of the cables. The small diameter decreaser has an outter diameter of 7.5 mm and an inner diameter of 4.5 mm. Thus cables with an outter diameter of 3 mm up to 4.5 mm can be fixed firmly. The big diameter decreaser has an outter diameter of 9.5 mm and an inner diameter of 7.5 mm. Thus cables with an outter diameter from 5 mm to 7.5 mm can be fixed firmly. Without using any diameter decreaser cables with diameters from 7.5 mm to 9.5 mm can be installed.

VIABLUE T6S XLR M €.19,90 Per ordine TELEFONARE/EMAIL

ITEM NO.30550/30552 High-End in the highest class.Minimum resistance. Maximum quality.ViaBlue™ T6s XLR plugs have contact pins made of bronze which are 24 carat gold-plated. The shells are made of aluminum. Cables up to 12 mm diameters can be installed. With the gummi break protection cables with 7-8 mm diameter can be installed Contacts can be taken out.For the assembly the stripped cable ends are soldered at the contact part of the T6s XLR plugs. The contact part can be removed completely from the plug's shell. The two M4 screws serves as strain relief.

VIABLUE T6S XLR F €.19,90 Per ordine TELEFONARE/EMAIL

ITEM NO.30555/30557 High-End in the highest class.Minimum resistance. Maximum quality.ViaBlue™ T6s XLR plugs have contact pins made of bronze which are 24 carat gold-plated. The shells are made of aluminum. Cables up to 12 mm diameters can be installed. With the gummi break protection cables with 7-8 mm diameter can be installed Contacts can be taken out.For the assembly the stripped cable ends are soldered at the contact part of the T6s XLR plugs. The contact part can be removed completely from the plug's shell. The two M4 screws serves as strain relief.item-no.: 30555, T6s XLR plug female, 1 pieceViaBlue™ T6s Series. The 6th sense.

VIABLUE SILVER SOLDER 50G €.11,00 Per ordine TELEFONARE/EMAIL

VIABLUE SILVER SOLDER 100G €.17,00 Per ordine TELEFONARE/EMAIL

VIABLUE SILVER SOLDER 100G €.38,00 Per ordine TELEFONARE/EMAIL

CAVO DIFFUSORI A METROTelefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 info@sinergy.us

VIABLUE SC2F SILVER €.14,90 Per ordine TELEFONARE/EMAIL

ultima versione dell' ormai famoso cavo viablue composto da 2 cavi dal diametro di 4 mm² a sua volta composto da sette cavi per un total di 448 fili singoli in puro rame ofc dove il 50% placcato in argento per ottenere un migliore risultato alle alte frequenze mentre il restamte 50% e' dedicato al trasferimento del segnale per le basse frequenze
QUESTI CAVI HANNO BISOGNO DI UN RODAGGIO PER OTTENERE LE MASSIME PRESTAZIONI DI 36 ORE

ITEM NO.24200 Definition. Details. Living music.High-End quality. Salient Design. ViaBlue™ Cobra.ViaBlue™ SC-2 Silver Series loudspeaker cable have a combination of silvered braids for the high pass range and tinned braids for the pressureful rendition of the low pass. SC-2 speaker cables have a transparent and three-dimensional acoustics and a brilliant, airy quality in the high range. Clean lows and basses homogeneously round out the acoustic pattern. Technically, all of the frequency ranges are cleanly and realistically represented and reproduced in a linear fashion.Different materials for different ranges.Both 4 mm2 leads of the SC-2 speaker cable consist of seven-stranded lays with a total of 448 individual wire conductors. In order to customize the sound range for the individual frequency ranges, 50% of the braids have a genuine silver plating for accurate reproduction of the high range and 50% have pure copper strands for powerful accentuation of the bass.The basic burn-in time of the SC-2 speaker cables is approx. 18-20 hours. The total burn-in time is approx. 38-40 hours. (Exact times depend on temperature and location)

VIABLUE SC4F SILVER €.22,90 Per ordine TELEFONARE/EMAIL

ultima versione dell' ormai famoso cavo viablue composto da 4 cavi dal diametro di 4 mm² a sua volta composto da sette cavi per un total di 896 fili singoli in puro rame ofc dove il 50% placcato in argento per ottenere un migliore risultato alle alte frequenze mentre il restamte 50% e' dedicato al trasferimento del segnale per le basse frequenze
QUESTI CAVI HANNO BISOGNO DI UN RODAGGIO PER OTTENERE LE MASSIME PRESTAZIONI DI 36 ORE

ITEM NO.24300 plated strands for powerful playback of the bass range. SC-4 speaker cables have a transparent and three-dimensional sound and a brilliant, airy quality in the high range. Clean lows and basses homogeneously round out the acoustic pattern. Technically, all the frequency ranges are cleanly and realistically represented and reproduced in a linear fashion.Seperate signal lines for high and low pass.The advantage of a bi-wire speaker cable compared to a single-wire speaker cable (e.g. twin speaker cable) is to reduce distortions. When speakers are connected to an amplifier with traditional wiring, distortions are created. This can be caused by vibrations of the woofer thereby creating voltage in the cable. These distortions are not sufficiently eliminated by the amplifier. Some of these distortions are modified on the tweeter, mid-range speaker and woofer. Bi-wiring reduces such distortions. They occur only at the amplifier. There they can be efficiently eliminated by the amplifier control loop. A control loop serves to hold a certain magnitude constant (negative feedback control, scanning by sensing devices, comparison of the values with the reference value, sending a correction signal when there are deviations, whereupon the deviating state is reset to the initial value).Silver plating for more brilliance.The four 4 mm2 leads of the SC-4 more speaker cable consist of ever 7 stranded bundles with altogether 896 individual braids. In order to specialize the sound range for the individual frequency ranges, two of the four veins are silvered and two veins tinned. Through the combination of silver-plated and tin-plated leads, the finest details and brilliance of the treble range as well as the lower frequency signals of the bass range are fully carried and powerfully reproduced through the attached speakers. The two silvered leads are connected with the high tone range of the loudspeakers. By the silver plating finest details will be transfered in the high tone range. The two tinned copper leads are connected with the low range of the loudspeakers. The low-frequency signals are completely transported in base range and shown by the tinning of the copper braids over the attached loudspeakers pressureful.Burned in well.The basic burn-in time of the SC-4 speaker cables is approx. 22-24 hours. The total burn-in time is approx. 42-44 hours. (Exact times depend on temperature and location)Tecnical Dates: 4x4 mm2 lines (je 224 x 0.15 mm), Isolation: PVC, Leader resistance, tinned: 4.6 mOhm / m, Leader resistance silvered: 4.4 mOhm / m, Leader resistance: 136 pF / m --> always the lines facing diagonally, Inductance: 0,63 µH / m

CAVI DI CORRENTE a metro Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 info@sinergy.us

VIABLUE X25 €.24,00 Per ordine TELEFONARE/EMAIL

Cavo corrente Viablue X25 è costituito da 3 conduttori da 2,5mmq ognuno composto da 50 fili placcati in argento. Lo schermo è composto da un primo strato di alluminio che ricopre il 100% del cavo e da un secondo in rame con una superfice equivalente al 93% del totale. Questo garantisce una immunità pressochè totale sia in emissione che in ricezione dalle interferenze radio e elettromagnetche. Il diametro esterno è di 13 mm e la composizione dell'isolante lo rende particolarmente flessibile.VDE, HAR, UL, CUL / CE certificazioni

X-25 Silver power cable High-end power cable with double screening, silverings and 3x 2.5 mm2 conductors. ViaBlue™ X-25 Silver power cables supply high-end audio and video equipment with clean power. The double screening keeps out interfering frequencies. The X-25 sets out the basis for a completely clean and crystal clear sound. External disturbances have no influence on the signals being transmitted The absolute sovereignty in transmission.X-25 Silver power cable with double shield. ViaBlue™ X-25 Silver power cables supply high-end audio and video equipment with clean power. The ViaBlue™ X-25 Silver has three conductors with each 2.5 mm2. Each conductor contains 50 silver strands. The double screening of 100% aluminum-laminated foil and 93% tinned copper braid with 32 strands guards against interference from electromagnetic (EM) and radio frequency (RF) sources. The external diameter of the X-25 power cable is 13 mm. The X-25 Silver is very flexible and elastic. The X-25 has certifications of VDE, HAR, UL, CUL / CE.Non-shielded power cords may act as antennas. Thus, external interference fields have effects on the frequencies of the signals. The ViaBlue™ X-25 Silver cord with 100% covering shields blocks these external interference fields. For a properly functioning system, it is necessary to transport electrical power clean and trouble-free to all connected devices and giving the complete system that depends on the incoming power an optimum of interference-free basis. The X-25 sets out the basis for a completely clean and crystal clear sound. External disturbances have no influence on the signals being transmitted. Full transfer of the entire spectrum is given by technical linearity. DESCRIPTION: • X-25 SILVER POWER CABLE OUTTER DIAMETER: • 13 MM CONDUCTOR DIAMETERS: • 3X 2.5 mm² SCREENING CONSTRUCTION: • ALU FOIL | 32X 0.10 STRANDS BRAID ROHS COMPLIANCE: • ROHS COMPLIANTSCREENINGS: • 2 (1X FOIL / 1X BRAID.) FINISHINGS: • SILVERED / TINNED ISOLATION RESISTANCE: • > 20 MOHM X KM ISOLATION: • PVC TM2 MIX VDE 0472TEST VOLTAGE: • 3000 VOLT PLAY-IN-TIME: • APPR. 16 HOURS ZULASSUNGEN: • VDE | CE | UL | CSA CONDUCTOR SIGNS: • BLACK | BLUE | GREEN/YELLOW

CAVO SEGNALE a metro

Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 info@sinergy.us

VIABLUE NF-B €.12,90 Per ordine TELEFONARE/EMAIL

ITEM NO.22800NF-B Subwoofer-interconnect sind speziell entwickelte NF-Kabel, die den Bassbereich kraft- und druckvoll wiedergeben. Die Kapazität zwischen Innenleiter und Schirm ist durch einen sehr dicken Innenleiter maximal angehoben. Als Isolation wird der thermoplastische Kunststoff LDPE verwendet. Somit wird die Kapazität bei gleicher Dimensionierung weiter angehoben. Das Resultat sind kapazitive Werte von 128 pF/m.ViaBlue™ NF-B interconnect wurden explizit für den Anschluss von Subwoofern entwickelt. Der auf den Bassbereich fokusierte Signaltransfer wird maximal unerstützt, dass selbst auf lengthren Signalwegen der Druck nicht verloren geht. Subwoofer können somit an die raumakkustisch orientiert beste Stelle positioniert werden.Der extrem dicke Innenleiter des NF-B Subwoofer-interconnects erzeugt einen hohen Druck für Subwoofer. Die dreifache Abschirmung aufgebaut aus einem doppelten, gegenläufigen Wendelschirm sowie der halbleitenden LDPE-Schicht schirmen den massiven Innenleiter

VIABLUE NF-S1 €.12,90 Per ordine TELEFONARE/EMAIL

ITEM NO.22200Originalgetreue Musikwiedergabe.Linearität. Komplettes Frequenzspektrum.ViaBlue™ NF-S1 interconnect geben Musik mit exakter Darstellung aller Frequenzen wieder. Das Klangbild ist vollkommen linear und unverfälscht. Versilberungen der beiden Schirme lassen auch feinste musikalische Tendenzen und Detailtreue im Hochtonbereich erkennen. Das Ziel ist es, Musik so wiederzugeben wie sie aufgenommen wurde - ohne jegliche Verfälschungen. Das NF-S1 löst diese Aufgabe souverän.Der symmetrische Aufbau des NF-S1 hat zwei verzinnte 0.5 mm2 Kupferinnenleiter mit je 19 Einzellitzen (19 x 0.185 mm) sowie Polyethylen-Isolierungen. Als Füller werden zwei verseilte PVC Isolatoren verwendet.Die vierfache Abschirmung "Quattro Silver Shield" hat zwei ALU-PETP Folien und zwei gegenläufige, versilberte Spiralschirme mit feinen 0.15 mm Einzeldrähten. Zum Schutz des äusseren Silver-Shields ist eine Vliesfolie zwischen Schirm und Aussenmantel vorhanden. Das NF-S1 hat einen Aussendurchmesser von 8 mm.

VIABLUE NF-S2 €.9,90 Per ordine TELEFONARE/EMAIL

ITEM NO.22300100% Digital. 100% Signal.Fehlerfreie Übertragung auf allen Distanzen.ViaBlue™ NF-S2 Kabel sind symmetrische Digitalkabel mit einem Wellenwiderstand von 110 Ohm. Sie sind AES / EBU sowie DMX512 konform. Sie haben zwei verzinnte 0.5 mm2 Kupferinnenleiter mit je 19 Einzellitzen (19 x 0.185 mm) sowie Polyethylen-Isolierungen. Als Füller werden zwei verseilte PVC Isolatoren verwendet.Die doppelte Abschirmung "Double Silver Shield" hat einen ALU-PETP Folienschirm und einen versilberten Spiralschirm mit feinen 0.15 mm Einzeldrähten. Zum Schutz des versilberten Abschirmung ist eine Vliesfolie zwischen Schirm und Aussenmantel vorhanden. Das NF-S2 hat einen Aussendurchmesser von 8 mm.

VIABLUE H-FLEX €.9,90 Per ordine TELEFONARE/EMAIL

ITEM NO.25200Optisches Toslinkkabel.Digitale Übertragung per Lichtwellenleiter.ViaBlue™ H-Flex Toslinkkabel sind optische High-End-Digitalkabel, die Digitalsignale per Lichtwellentechnik übertragen. Elektrische Störfelder haben somit keinen Einfluß auf die Übertragung. H-Flex Toslinkkabel sind die professionelle optische Verbindung zwischen High-End-Geräten wie Verstärkern, CD/DVD-Playern, etc.Durch die Herstellung einer speziellen Faser für den Lichtwellenleiter funktionieren die H-Flex Toslinkkabel mit einer optimierten Lichtausbeute. Durch mehere Bearbeitungsvorgänge beim Auftragen von Isolationsschichten mit unterschiedlichen Materialien wird eine sehr hohe Flexibilität erreicht, die problemlos enge Biegeradien zulässt ohne die Dämpfungswerte ansteigen zu lassen. Auch bei stärkeren Biegungen überträgt das H-Flex Lichtwellenleiterkabel fehlerfrei.Der sehr hochwertige, innenliegende Lichtwellenleiter wird durch eine spezielle Weich-Kunststoffmischung geschützt. Direkt darüber liegt eine weitere dünne, verhärtete Kunststoffschicht zur Lagestabilisierung und Fixierung der sensiblen Innenkonstruktion. Der dicke Aussenmantel schützt diese drei Innenschichten vor Beschädigungen und Knicken.

VIABLUE NF-75 €.9,90 Per ordine TELEFONARE/EMAIL

ITEM NO.22900 Digital Speed in a digital World. Ohne Kompromisse. Maximale Geschwindigkeit. Fehlerfrei.ViaBlue™ NF-75 Silver Digitalkabel sind koaxiale High-End-Digitalkabel mit idealen elektrischen Werten. Sie ermöglichen die fehlerfreie und korrekte Übertragung von digitalen Signalen.Über eine Grundvoraussetzung von einem 75 Ohm Wellenwiderstand werden weiterhin als technische Feinheiten ein geschäumtes Foam Polyethylen Dielektrikum sowie eine versilberte Abschirmung verwendet. Dies führt zu extrem niedrigen Widerstandswerten und somit zu maximalen Übertragungsgeschwindigkeiten von elektrischen Digitalsignalen.Durch das ViaBlue™ Silver Shield haben NF-75 interconnect eine hunderprozentig flächendeckende Abschirmung vor elektrischen Störfeldern. Die Abschirmung setzt sich aus einem Aluminiumfolienschirm und einem versilberten Geflechtschirm zusammen.

VIABLUE TVR120DB €.7,90 Per ordine TELEFONARE/EMAIL

Quadrupla schermatura in rame OFC placcato argento/alluminio/mylar,polo caldo solid core in rame OFCPCO, dielettrico in polietilene/polyolefina, 120 DB(Made in germany)polo caldo isolato in teflon. Eccezionale per trasmissioni in "HD/SD" uno dei migliori cavi antenna a livello mondiale, un acquisto fondamentale per display, videoproiettori, registratori, dvdr, tv, lcd, plasma.

ITEM NO.23600 Elektrisch ausgestattet mit einem Optimum an Technik übertragen die ViaBlue™ TVR Silver Series Antennenkabel digitaltauglich mit 75 Ohm und idealen 90 dB verlustfrei. Perfekte und schnelle Bilder sowie Tonübertragungen sind die Konsequenz des High-End Antennenkabels.ViaBlue™ TVR 120 dB Antennenkabel verbinden hochwertige Audio- und Videoempfangsgeräte wie TV und Tuner in High-End-Anlagen miteinander.Mit einem doppeltem Geflechtsschirm und zwei Aluminuimfolienschirmen wird ein Abschirmungsfaktor von 100% erreicht, der maximalen Schutz vor elektrischen Störfeldern wie Handys oder Mikrowellen bietet. Der Solid Core Konduktors wird durch ein Polyethylen Dielektrikum isoliert.

GUAINE SALVA CAVO a metroTelefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 info@sinergy.us

VIABLUE SLEEVE BLACKLINE €.1,90 Per ordine TELEFONARE/EMAIL

Guaina salvacavo per diametri 5-17

ITEM NO.44310 Sleeve cover as cable coat.Flexibel and stretchable.The ViaBlue "Blackline" sleeve protects cables against abrasion, bending and incident light radiation. Cables become thus more resistant opposite outside environmental influences and thus more durable.Covering cables.The "Blackline" sleeve is flexible and thus suitably for cables with a diameter from 5 to 17 mm. It is drawn up before assembly of the patch cords on the cable. By different diameters of the respective cables the relation length/diameter of the sleeve changes. The more largely the diameter of a cable the more length is needed. The necessary quantities due to different cable diameters can be calculated with the help of the table standing down.Multi layer.It's possible to put several multi layers of the "Army" sleeve on the cables, in order to protect those more intensively. Thereby first of all a clearly higher protection against bending is reached.

VIABLUE SLEEVE NEON €.1,90 Per ordine TELEFONARE/EMAIL

Guaina salvacavo per diametri 5-17

ITEM NO.44315 Sleeve cover as cable coat. Flexibel and stretchable. The ViaBlue "Neon" sleeve protects cables against abrasion, bending and incident light radiation. Cables become thus more resistant opposite outside environmental influences and thus more durable. Covering cables. The "Neon" sleeve is flexible and thus suitably for cables with a diameter from 5 to 17 mm. It is drawn up before assembly of the patch cords on the cable. By different diameters of the respective cables the relation length/diameter of the sleeve changes. The more largely the diameter of a cable the more length is needed. The necessary quantities due to different cable diameters can be calculated with the help of the table standing down. Multi layer.It's possible to put several multi layers of the "Army" sleeve on the cables, in order to protect those more intensively. Thereby first of all a clearly higher protection against bending is reached.

VIABLUE SLEEVE ARMY €.1,90 Per ordine TELEFONARE/EMAIL

Guaina salvacavo per diametri 5-17

ITEM NO.44320 Sleeve cover as cable coat.Flexibel and stretchable. The ViaBlue "Army" sleeve protects cables against abrasion, bending and incident light radiation. Cables become thus more resistant opposite outside environmental influences and thus more durable.Covering cables.The "Army" sleeve is flexible and thus suitably for cables with a diameter from 5 to 17 mm. It is drawn up before assembly of the patch cords on the cable. By different diameters of the respective cables the relation length/diameter of the sleeve changes. The more largely the diameter of a cable the more length is needed. The necessary quantities due to different cable diameters can be calculated with the help of the table standing down.Multi layer.It's possible to put several multi layers of the "Army" sleeve on the cables, in order to protect those more intensively. Thereby first of all a clearly higher protection against bending is reached.

VIABLUE SLEEVE REDLINE €.1,90 Per ordine TELEFONARE/EMAIL

Guaina salvacavo per diametri 5-17

ITEM NO.44325 Sleeve cover as cable coat.Flexibel and stretchable.The ViaBlue "Redline" sleeve protects cables against abrasion, bending and incident light radiation. Cables become thus more resistant opposite outside environmental influences and thus more durable.Covering cables.The "Redline" sleeve is flexible and thus suitably for cables with a diameter from 5 to 17 mm. It is drawn up before assembly of the patch cords on the cable. By different diameters of the respective cables the relation length/diameter of the sleeve changes. The more largely the diameter of a cable the more length is needed. The necessary quantities due to different cable diameters can be calculated with the help of the table standing down.Multi layer. It's possible to put several multi layers of the "Army" sleeve on the cables, in order to protect those more intensively. Thereby first of all a clearly higher protection against bending is reached.

VIABLUE SLEEVE BIG STONE €.3,50 Per ordine TELEFONARE/EMAIL

Guaina salvacavo per diametri 11-27

ITEM NO.44360 Geflechtschlauch Big Stone. Aufziehen des Geflechtschlauches. Der flexible Geflechtschlauch ist dehnbar und somit geeignet für Kabel mit einem Durchmesser von 11 bis 27 mm. Er wird vor Montage der Steckverbindungen auf das Kabel aufgezogen. Durch unterschiedliche Durchmesser der jeweiligen Kabel ändert sich die Relation Länge/Durchmesser des Geflechtschlauches. Je größer der Durchmesser eines Kabels desto mehr Länge wird benötigt (siehe Tabelle unten). Es ist möglich mehrere Schichten des Geflechtschlauches aufzuziehen, um Kabel noch intensiver zu schützen. Hierdurch wird vor allen Dingen ein deutlich höherer Schutz gegen Abknicken erreicht.Kabeldurchmesser benötigter Geflechtschlauch je m Kabel Ø 10-15 mm ca. 1 Meter Ø 20 mm ebenfalls ca. 1 Meter Ø 25 mm ebenfalls ca. 1 Meter

VIABLUE SLEEVE BIG STONE €.3,50 Per ordine TELEFONARE/EMAIL

Guaina salvacavo per diametri 11-27

ITEM NO.44350 Geflechtschlauch Big black. Aufziehen des Geflechtschlauches. Der flexible Geflechtschlauch ist dehnbar und somit geeignet für Kabel mit einem Durchmesser von 11 bis 27 mm. Er wird vor Montage der Steckverbindungen auf das Kabel aufgezogen. Durch unterschiedliche Durchmesser der jeweiligen Kabel ändert sich die Relation Länge/Durchmesser des Geflechtschlauches. Je größer der Durchmesser eines Kabels desto mehr Länge wird benötigt (siehe Tabelle unten). Es ist möglich mehrere Schichten des Geflechtschlauches aufzuziehen, um Kabel noch intensiver zu schützen. Hierdurch wird vor allen Dingen ein deutlich höherer Schutz gegen Abknicken erreicht.Kabeldurchmesser benötigter Geflechtschlauch je m Kabel Ø 10-15 mm ca. 1 Meter Ø 20 mm ebenfalls ca. 1 Meter Ø 25 mm ebenfalls ca. 1 Meter

GUAINE DI TERMINAZIONE Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 info@sinergy.us

VIABLUE HEAT SHRINKS SPLITTER €.5,99 Per ordine TELEFONARE/EMAIL

Confezione 8 pezzi guania copri slitter

ITEM NO.44950 Schrumpfschlauch für Splitter. Gewebefixierung und Stabilität.ViaBlue™ Schrumpfschläche für Splitter werden zur Fixierung von Geflechtschlächen sowie zur Stabilisierung aller ViaBlue™ Splitter auf Kabel aufgeschrumpft. Danach können die Splitter montiert werden. Die Schrumpfschläche für Splitter haben einen Durchmesser von 18 mm vor Schrumpfung.

VIABLUE HEAT SHRINKS SIGNING €.5,99 Per ordine TELEFONARE/EMAIL

DUE COPPIE GUANIA SEGNA POLARITA' PER CAVO DIFFUSORI

ITEM NO.44970 Schrumpfschlauch zur Kennzeichnung. Markierung von Kabeln. ViaBlue™ Schrumpfschläche zur Kennzeichnung werden zur Markierung von Kabelenden verwendet. Die erste Variante enthält 4 Paare, schwarz und rote Schrumpfschläche mit ViaBlue™-Aufdruck und richtungsweisenden Pfeil. Die zweite Variante enthält vier mal zwei Paare zur Kennzeichnung von Hochton- und Tieftonbereichen bei Bi-Wiring und Bi-Amping speaker cablen. Die Schrumpfschläche zur Kennzeichnung haben einen Durchmesser von 10 mm vor Schrumpfung

VIABLUE HEAT SHRINKS ARROW €.5,99 Per ordine TELEFONARE/EMAIL

COPPIA SEGNA DIREZIONE SEGNALE PER CAVI DI SEGNALE

ITEM NO.44960 Schrumpfschlauch zur Kennzeichnung. Markierung von Kabeln. ViaBlue™ Schrumpfschläche zur Kennzeichnung werden zur Markierung von Kabelenden verwendet. Die erste Variante enthält 4 Paare, schwarz und rote Schrumpfschläche mit ViaBlue™-Aufdruck und richtungsweisenden Pfeil. Die zweite Variante enthält vier mal zwei Paare zur Kennzeichnung von Hochton- und Tieftonbereichen bei Bi-Wiring und Bi-Amping speaker cablen. Die Schrumpfschläche zur Kennzeichnung haben einen Durchmesser von 10 mm vor Schrumpfung

SPLITTER

Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 info@sinergy.us

VIABLUE SC2 SLPITTER €.9,00 Per ordine TELEFONARE/EMAIL

ITEM NO.44920 Splitter & ferrite core filters.Leading cables professionally, elemination of failures.ViaBlue™ ferrite core filters drains the inner/intermediate currents which occur with coaxial cables from the conductor and shielding. The splitters protect the cable ends from snapping off and, at the same time, provide a professional, well thought out cable routing of the single leads.

VIABLUE SC4/2 SLPITTER €.9,00 Per ordine TELEFONARE/EMAIL

ITEM NO.44930 Splitter & ferrite core filters.Leading cables professionally, elemination of failures.ViaBlue™ ferrite core filters drains the inner/intermediate currents which occur with coaxial cables from the conductor and shielding. The splitters protect the cable ends from snapping off and, at the same time, provide a professional, well thought out cable routing of the single leads.

VIABLUE SC4/4 SLPITTER €.9,00 Per ordine TELEFONARE/EMAIL

ITEM NO.44935 Splitter & ferrite core filters.Leading cables professionally, elemination of failures.ViaBlue™ ferrite core filters drains the inner/intermediate currents which occur with coaxial cables from the conductor and shielding. The splitters protect the cable ends from snapping off and, at the same time, provide a professional, well thought out cable routing of the single leads.

VIABLUE NS1 SLPITTER €.9,00 Per ordine TELEFONARE/EMAIL

ITEM NO.44945 Splitter & ferrite core filters.Leading cables professionally, elemination of failures.ViaBlue™ ferrite core filters drains the inner/intermediate currents which occur with coaxial cables from the conductor and shielding. The splitters protect the cable ends from snapping off and, at the same time, provide a professional, well thought out cable routing of the single leads.

FILTRI IN FERRITETelefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 info@sinergy.us

VIABLUE FERRITE 0.9 FILTER €.8,50 Per ordine TELEFONARE/EMAIL

ITEM NO.44910 diametro 0.9 Splitter & ferrite core filters.Leading cables professionally, elemination of failures.ViaBlue™ ferrite core filters drains the inner/intermediate currents which occur with coaxial cables from the conductor and shielding. The splitters protect the cable ends from snapping off and, at the same time, provide a professional, well thought out cable routing of the single leads.

VIABLUE FERRITE 0.9 FILTER €.9,00 Per ordine TELEFONARE/EMAIL

ITEM NO.44905-diametro 0.9 Splitter & ferrite core filters.Leading cables professionally, elemination of failures.ViaBlue™ ferrite core filters drains the inner/intermediate currents which occur with coaxial cables from the conductor and shielding. The splitters protect the cable ends from snapping off and, at the same time, provide a professional, well thought out cable routing of the single leads.

VIABLUE FERRITE 11 FILTER €.9,00 Per ordine TELEFONARE/EMAIL

ITEM NO.44906-diametro 11 Splitter & ferrite core filters.Leading cables professionally, elemination of failures.ViaBlue™ ferrite core filters drains the inner/intermediate currents which occur with coaxial cables from the conductor and shielding. The splitters protect the cable ends from snapping off and, at the same time, provide a professional, well thought out cable routing of the single leads.

VIABLUE FERRITE 14 FILTER €.9,00 Per ordine TELEFONARE/EMAIL

ITEM NO.44905-diametro 14 Splitter & ferrite core filters.Leading cables professionally, elemination of failures.ViaBlue™ ferrite core filters drains the inner/intermediate currents which occur with coaxial cables from the conductor and shielding. The splitters protect the cable ends from snapping off and, at the same time, provide a professional, well thought out cable routing of the single leads.

CAVI OTTICI DIGITALE

Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 info@sinergy.us

VIABLUE HI-FLEX 50 cm ITEM N° 25205 €.50,00 Per ordine TELEFONARE/EMAIL

VIABLUE HI-FLEX 100 cm ITEM N° 25208 €.53,00 Per ordine TELEFONARE/EMAIL

VIABLUE HI-FLEX 250 cm ITEM N° 25214 €.63,90 Per ordine TELEFONARE/EMAIL

VIABLUE HI-FLEX 500 cm ITEM N° 25222 €.72,00 Per ordine TELEFONARE/EMAIL

VIABLUE HI-FLEX 800 cm ITEM N° 25230 €.87,00 Per ordine TELEFONARE/EMAIL

VIABLUE HI-FLEX 1000 cm ITEM N° 25234 €.95,00 Per ordine TELEFONARE/EMAIL

VIABLUE HI-FLEX 1500 cm ITEM N° 25244 €.120,00 Per ordine TELEFONARE/EMAIL

Optisches Toslinkkabel.Digitale Übertragung per Lichtwellenleiter.ViaBlue™ H-Flex Toslinkkabel sind optische High-End-Digitalkabel, die Digitalsignale per Lichtwellentechnik übertragen. Elektrische Störfelder haben somit keinen Einfluß auf die Übertragung. H-Flex Toslinkkabel sind die professionelle optische Verbindung zwischen High-End-Geräten wie Verstärkern, CD/DVD-Playern, etc.Durch die Herstellung einer speziellen Faser für den Lichtwellenleiter funktionieren die H-Flex Toslinkkabel mit einer optimierten Lichtausbeute. Durch mehere Bearbeitungsvorgänge beim Auftragen von Isolationsschichten mit unterschiedlichen Materialien wird eine sehr hohe Flexibilität erreicht, die problemlos enge Biegeradien zulässt ohne die Dämpfungswerte ansteigen zu lassen. Auch bei stärkeren Biegungen überträgt das H-Flex Lichtwellenleiterkabel fehlerfrei.Der sehr hochwertige, innenliegende Lichtwellenleiter wird durch eine spezielle Weich-Kunststoffmischung geschützt. Direkt darüber liegt eine weitere dünne, verhärtete Kunststoffschicht zur Lagestabilisierung und Fixierung der sensiblen Innenkonstruktion. Der dicke Aussenmantel schützt diese drei Innenschichten vor Beschädigungen und Knicken.

VIABLUE HI-FLEX 50 cm ITEM N° 25405 €.50,00 Per ordine TELEFONARE/EMAIL

VIABLUE HI-FLEX 100 cm ITEM N° 25408 €.53,00 Per ordine TELEFONARE/EMAIL

VIABLUE HI-FLEX 250 cm ITEM N° 25414 €.59,90 Per ordine TELEFONARE/EMAIL

VIABLUE HI-FLEX 500 cm ITEM N° 25422 €.72,00 Per ordine TELEFONARE/EMAIL

VIABLUE HI-FLEX 800 cm ITEM N° 25430 €.87,00 Per ordine TELEFONARE/EMAIL

VIABLUE HI-FLEX 1000 cm ITEM N° 25434 €.95,00 Per ordine TELEFONARE/EMAIL

VIABLUE HI-FLEX 1500 cm ITEM N° 25444 €.120,00 Per ordine TELEFONARE/EMAIL

Idealer Schutz für den Lichtwellenleiter.H-Flex Mini-Toslinkkabel sind die professionelle optische Verbindung zwischen High-End-Geräten wie Verstärkern, CD/DVD-Playern usw. Durch die Herstellung einer speziellen Lichtwellenleiterfaser funktionieren die H-Flex Toslinkkabel mit einer optimierten Lichtausbeute. Durch mehrere Bearbeitungsvorgänge beim Auftragen von Isolationsschichten mit unterschiedlichen Materialien wird eine sehr hohe Flexibilität erreicht, die problemlos enge Biegeradien zulässt ohne die Dämpfungswerte ansteigen zu lassen.Der sehr hochwertige, innen liegende Lichtwellenleiter wird durch eine spezielle Weich-Kunststoffmischung geschützt. Direkt darüber liegt eine weitere Kunststoffschicht zur Lagestabilisierung und Fixierung der sensiblen Innenkonstruktion. Der dicke Außenmantel schützt diese drei Innenschichten vor Beschädigungen und Knicken.Konfektioniert mit Toslinksteckern.H-Flex Mini-Toslinkkabel sind konfektioniert mit ViaBlue™ T6s Mini-Toslinksteckern. Für weiteren äußeren Schutz sowie optischer Dynamik sind die H-Flex Toslinkkabel mit dem ViaBlue™ Cobragewebe umflochten. Optisches Toslinkkabel.Digitale Übertragung per Lichtwellenleiter.ViaBlue™ H-Flex Toslinkkabel sind optische High-End-Digitalkabel, die Digitalsignale per Lichtwellentechnik übertragen. Elektrische Störfelder haben somit keinen Einfluß auf die Übertragung. H-Flex Toslinkkabel sind die professionelle optische Verbindung zwischen High-End-Geräten wie Verstärkern, CD/DVD-Playern, etc.Durch die Herstellung einer speziellen Faser für den Lichtwellenleiter funktionieren die H-Flex Toslinkkabel mit einer optimierten Lichtausbeute. Durch mehere Bearbeitungsvorgänge beim Auftragen von Isolationsschichten mit unterschiedlichen Materialien wird eine sehr hohe Flexibilität erreicht, die problemlos enge Biegeradien zulässt ohne die Dämpfungswerte ansteigen zu lassen. Auch bei stärkeren Biegungen überträgt das H-Flex Lichtwellenleiterkabel fehlerfrei.Der sehr hochwertige, innenliegende Lichtwellenleiter wird durch eine spezielle Weich-Kunststoffmischung geschützt. Direkt darüber liegt eine weitere dünne, verhärtete Kunststoffschicht zur Lagestabilisierung und Fixierung der sensiblen Innenkonstruktion. Der dicke Aussenmantel schützt diese drei Innenschichten vor Beschädigungen und Knicken.

VIABLUE HI-FLEX 50 cm ITEM N° 25305 €.50,00 Per ordine TELEFONARE/EMAIL

VIABLUE HI-FLEX 100 cm ITEM N° 25308 €.53,00 Per ordine TELEFONARE/EMAIL

VIABLUE HI-FLEX 250 cm ITEM N° 25314 €.59,90 Per ordine TELEFONARE/EMAIL

VIABLUE HI-FLEX 500 cm ITEM N° 25322 €.72,00 Per ordine TELEFONARE/EMAIL

VIABLUE HI-FLEX 800 cm ITEM N° 25330 €.87,00 Per ordine TELEFONARE/EMAIL

VIABLUE HI-FLEX 1000 cm ITEM N° 25334 €.95,00 Per ordine TELEFONARE/EMAIL

VIABLUE HI-FLEX 1500 cm ITEM N° 25344 €.120,00 Per ordine TELEFONARE/EMAIL

Digitale Signale per Lichtwellenleiter.Maximaler Knickschutz durch 9 mm Aussendurchmesser. Idealer Schutz für den Lichtwellenleiter.H-Flex Toslinkkabel sind die professionelle optische Verbindung zwischen High-End-Geräten wie Verstärkern, CD/DVD-Playern usw. Durch die Herstellung einer speziellen Lichtwellenleiterfaser funktionieren die H-Flex Toslinkkabel mit einer optimierten Lichtausbeute. Durch mehrere Bearbeitungsvorgänge beim Auftragen von Isolationsschichten mit unterschiedlichen Materialien wird eine sehr hohe Flexibilität erreicht, die problemlos enge Biegeradien zulässt ohne die Dämpfungswerte ansteigen zu lassen.Der sehr hochwertige, innen liegende Lichtwellenleiter wird durch eine spezielle Weich-Kunststoffmischung geschützt. Direkt darüber liegt eine weitere Kunststoffschicht zur Lagestabilisierung und Fixierung der sensiblen Innenkonstruktion. Der dicke Außenmantel schützt diese drei Innenschichten vor Beschädigungen und Knicken.Konfektioniert mit Toslinkstecker und Minitoslinkstecker.H-Flex Toslinkkabel sind konfektioniert mit ViaBlue™ einem T6sToslinkstecker und einem T6s Minitoslinkstecker. Für weiteren äußeren Schutz sowie optischer Dynamik sind die H-Flex Toslinkkabel mit dem ViaBlue™ Cobragewebe umflochten. Optisches Toslinkkabel.Digitale Übertragung per Lichtwellenleiter.ViaBlue™ H-Flex Toslinkkabel sind optische High-End-Digitalkabel, die Digitalsignale per Lichtwellentechnik übertragen. Elektrische Störfelder haben somit keinen Einfluß auf die Übertragung. H-Flex Toslinkkabel sind die professionelle optische Verbindung zwischen High-End-Geräten wie Verstärkern, CD/DVD-Playern, etc.Durch die Herstellung einer speziellen Faser für den Lichtwellenleiter funktionieren die H-Flex Toslinkkabel mit einer optimierten Lichtausbeute. Durch mehere Bearbeitungsvorgänge beim Auftragen von Isolationsschichten mit unterschiedlichen Materialien wird eine sehr hohe Flexibilität erreicht, die problemlos enge Biegeradien zulässt ohne die Dämpfungswerte ansteigen zu lassen. Auch bei stärkeren Biegungen überträgt das H-Flex Lichtwellenleiterkabel fehlerfrei.Der sehr hochwertige, innenliegende Lichtwellenleiter wird durch eine spezielle Weich-Kunststoffmischung geschützt. Direkt darüber liegt eine weitere dünne, verhärtete Kunststoffschicht zur Lagestabilisierung und Fixierung der sensiblen Innenkonstruktion. Der dicke Aussenmantel schützt diese drei Innenschichten vor Beschädigungen und Knicken.

ADATTATORI RCA

Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 info@sinergy.us

VIABLUE SUBWOOFER Y RCA €.12,00 Per ordine TELEFONARE/EMAIL

Adattatore rca un ingresso due uscite ideale per sub

ITEM NO.40690 Die ViaBlue™ XS Adapter-Serie. ViaBlue™ XS Subwoofer-Y-Adapter sind genormte High-End Audio-Adapter, die direkt auf Stereo-Cinchbuchsen aufgesteckt werden. Sie dienen in erster Linie als Y-Verteiler für Subwoofer. Durch die hochwertige, interne Kontaktierung der ViaBlue™ XS Adapterserie werden Signale widerstandlos übertragen.

Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 info@sinergy.us

Legenda istruzioni

Clicca per qui per vedere : FOTO PRODOTTO

Clicca per qui per vedere : ISTRUZIONI PRODOTTO

Clicca per qui per vedere : CATALOGO,PROVA RIVISTE SPECIALIZZATE PRODOTTO

Clicca per qui per vedere : DATI TECNICI SPECIFICHE PRODOTTO

Attenzione

Per ordinare o avere gli ultimi prezzi aggiornati telefona al 0174 670100 o invia un E-mail a info@sinergy.us

Il presente listino sostituisce ed annulla ogni precedente.
Le caratteristiche e i prezzi indicati possono variare senza preavviso telefonare o inviare un e-mail per ulteriori domande e conferme sui prezzi sopra riportati. Prezzi franco nostro magazzino.
Tutti i marchi citati nel presente listino sono di proprietà e registrati alle rispettive Case Produttrici