jadis

Jadis was created by André Calmettes, sharing his passion : the design and realisation of tube amplifiers intended to give the most accurate musical reproduction, ignoring all costs and difficulty. This passion - at times overriding the demands of sleep and leisure - resulted in the creation of prototypes that produced a sensation in audiophile circles. Jadis amplifiers and preamplifiers represent the ideal amplification system for all acoustic loudspeakers, whatever the load, the functioning (whether electrodynamics, electrostatic, or isodynamic) and the efficiency. They have marvellous dynamics from the bass to the highest treble, and a total lack of coloration, including the kind that tube electronics are usually accused of.

Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 info@sinergy.us

Amplificatore integrato 40 + 40 W RMS in “classe A”, su 8 ohm. Circuitazione push-pull con 4 EL 34 e 2 ECC 83 pilota. Ingressi CD, tuner e 3 ausiliari.
Orchestra, the latest arrival in the Jadis family, is an integrated amplifier with all the qualities that one expects from a Jadis product - its particularly recognisable transformers, the conventional wiring, the qualities of timber, transparency and dynamics : Jadis musicality in all its majesty.
Orchestra comes in a stainleass steel chassis with its tubes standing in ceramic gold-pin sockets. It has four EL 34 tubes mounted in push-pull, and driven by two ECC 83. A new touch to the Jadis tradition is the addition of wooden panel to the two sides of the chassis. Orchestra is the result of a highly-focused study undertaken by Jadis to meet the challenge of manufacturing a product with all essential high-end qualities and to bring it within the the reach of a wider general public. Specifications Sensitivity 380 mV Dimensions 530(W) x 260(D) x 220(H) mm Weight 21 Kg Bias Manual adjustment when the tubes is changed Power 40 W per channel Bandwidth @ -3dB 20Hz - 70 kHz Tubes List - 4 x EL34, - 2 x 12Ax7/ECC83 Consumption 300 W

Versione “reference” del modello Orchestra Amp, con 4 KT-90 e trasformatore di uscita speciale. Controlli di tono. Ingressi CD, tuner e 3 ausiliari.

Orchestra, the latest arrival in the Jadis family, is an integrated amplifier with all the qualities that one expects from a Jadis product - its particularly recognisable transformers, the conventional wiring, the qualities of timber, transparency and dynamics : Jadis musicality in all its majesty.
Orchestra comes in a stainleass steel chassis with its tubes standing in ceramic gold-pin sockets. It has four EL 34 tubes mounted in push-pull, and driven by two ECC 83. A new touch to the Jadis tradition is the addition of wooden panel to the two sides of the chassis. Orchestra is the result of a highly-focused study undertaken by Jadis to meet the challenge of manufacturing a product with all essential high-end qualities and to bring it within the the reach of a wider general public. Sensitivity 380 mV Dimensions 530(W) x 260(D) x 220(H) mm Weight 21 Kg Bias Manual - adjustment when the tubes is changed Power 40 W Rms per channel Bandwidth @ -3dB 20Hz - 70 kHz Connection 5 inputs, line output, speakers out Tubes List - 4 x EL34 / 6550 / KT90 / KT88, - 2 x 12Ax7/ECC83 Consumption 300 W

Amplificatore integrato 30 + 30 W RMS in “classe A”, su 8 ohm. Solo ingressi ad alto livello.

DA-30 The DA 30 integrated amplifier comes with its distinct golden brass front plate, but the chassis is available in black, or chrome, or with a grill extending over the whole of its surface. The DA 30 with a black chassis brings in a new note to the traditional aesthetic. The switches are not in gilded metal as is the facade, but in black plastic. Against the black transformer boxes, the glow of the tubes in this sober setting shows up to greater effect. The aesthetic of the DA 30 with a stainless steel chassis is by contrast all brilliance. The DA 30 covered by a grill offers a more discreet and distinctive note of elegance due the absence of the black edging around the golden front plate Specifications Sensitivity 115 mV Dimensions 485(W) x 445(H) x330(D) mm Weight 26 Kg Bias Automatic Power 30 W Rms per chanel Bandwidth @ -3db 20 Hz - 18 KHz Connection 5 inputs, monitoring, direct input for power amplifier Tubes List 4 X 6550/KT88/KT90, 3 X ECC82/12AU7, 2 X ECC83/12AX7 Consumption 275 W

Amplificatore integrato a valvole in “classe A”, su 8 ohm. Circuitazione push/pull con 4 KT88 finali. Solo ingressi ad alto livello.
Impedenza di carico: da 1ohm a 16 ohm.Potenza di uscita: 50W per canaleRisposta in frequenza a -3dB: 20Hz-35kHzImpedenza di ingresso: >100k OhmsSensibilità di ingresso massima potenza uscita: 100mVConsumo: 275WDimensioni: 500x220x330mm (LxAxP)Peso: 25 KgIl cablaggio del DA 50 Signature è effettuato completamente a mano e in aria, ovvero senza utilizzare circuiti pre-stampati.

DA-50S First of the new generation of integrated amplifiers, The DA50S was designed to accept the new production of KT88, mythic tubes for lots ofaudiophiles. Sensitivity 100 mV Dimensions 485(W) x 345(D) x 330(D) mm Weight 31 Kg Bias Automatic Power 30 W Rms per chanel Bandwidth @ -3dB 20Hz - 20 kHz Connection 5 inputs, line output, 2 speakers out Tubes List 4 x KT88, KT90, 6550, 2 x 12AX7/ECC83, 3 X 12AU7/ECC82. Consumption 275 W

Amplificatore integrato 60 + 60W RMS in “classe A”, su 8 ohm. Circuitazione push/pull con 4 KT88 finali per canale. 5 ingressi solo ad alto livello.

Using the same philosophy as the DA50, the DA88 has double the power and accepts the KT88 too. Taken out in 2004, it has already gained a great success everywhere around the world. Specifications Sensitivity 120 mV Dimensions 500(W) x 400(D) x 22(H) mm Weight 40 Kg Bias Automatic Power 60 Watt Rms per channel Bandwidth @ -3dB 10 Hz - 29 KHz Connection 5 inputs, line output, 2 speakers out Tubes List 8 x KT88, KT90, 6550, 2 x ECC83/12AX7, 3 x ECC82/12AU7 Consumption 360 W

Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 info@sinergy.us

Preamplificatore stereo di linea. Costruzione in due telai. 6 ingressi XLR e 2 Uscite XLR. Circuitazione Dual-MonoJPS8
The JPS8 is a line preamplifier using output transformers. This transformer avoids CC risk at the output and makes the unit not sensitive to the load. It is an all balanced design and equipped with a tubes power supply. Specifications Dimensions 460(W) x 400(H) x 155(D) mm (module), 395(W) x 235(D) x 155(H) (power supply) Weight 9 Kg (power supply) 13 Kg (module) Type Line with output transformer Gain 14dB - 11dB (CD input) Input Type 5 lines inputs, 2 outputs, monitoring balanced Bandwidth @ -3dB 5Hz to 23KHz Input Impedance 2 (separate power supply) Tubes List ECC82 X 4, ECC83 X 2, EL84 X4, EF86 X 1, KT90 X 1 Consumption 75 W

Preamplificatore stereo di linea. Alimentatore a valvole in telaio separato. Ingressi e uscite sbilanciate. Circuitazione Dual-Mono. Telecomando.

Type Line Gain 24dB - 18dB (CD input) Input Type 6 lines inputs, 1 output, monitoring unbalanced Bandwidth @ -3dB 20Hz - 74 kHz Input Impedance 2 (separate power supply) Tubes List ECC82 X 1, ECC83 X 3, EF86 X 1, EL84 X 1 Dimensons 430 x 345 x 175 mm Consumption 50W

Preamplificatore stereo di linea. Alimentatore a valvole in telaio separato. Ingressi e uscite sbilanciate. Circuitazione Dual-Mono. Telecomando.

Dimensions 430(W) x 345(D) x 175(H) mm each Type Line Input Type 5 lines inputs, 2 outputs, monitoring balanced Bandwidth 20 Hz - 40 KHz Input Impedance 2 (separate power supply) Tubes List 6 X ECC83/12AX7, 1 X EF86, 1 X EL84 Consumption 110 W

Preamplificatore stereo, costruzione in due telai con stadio d'alimentazione separato a stato solido. Phono MC.

Dimensions 430(W) x 345(D) x 175(H) mm each Type phono MM/MC Gain 57 dB (phono MM) / 84 dB (phono MC) at 1 KHz Input Type 1 MC/MM input Input Impedance 2 (separate power supply) Tubes List ECC88/6922 X 2, ECC83/12AX7 X 3, EF86 X 1, EL84 X 1 Consumption 63 w

Preamplificatore stereo, costruzione in due telai con stadio d'alimentazione separato a valvole. Phono MC. Telecomando.

The JP80MC is the best well known phono preamplifier by Jadis. Its phono stage accepts all MM or MC cartridges even if they have very low impedance. This unit is the a great choice for every vinyl lover. Specifications Type Phono MM/MC and line Gain 20 dB (line) / 57 dB (phono MM) / 84 dB (phono MC) à 1 KHz Input Type 1 MM input, 1 MC input, 4 line inputs Bandwidth @ -3dB 20 Hz - 50 KHz (line stage) Input Impedance 2 (separate power supply) Tubes List ECC88 X 2, ECC83 X 6, EF86 X 1, EL84 X 1 Dimensions 430 x 345 x 175 mm ,Consumption 65W

Preamplificatore stereo, costruzione in 4 telai, dual mono, con stadi d'alimentazione separati a valvole.
Disponibile anche in versione dedicata MM .

Preamplificatore stereo, costruzione in 4 telai, dual mono,con stadi d'alimentazione separati a valvole. Solo ingressi ad alto Iivello, uscite sbilanciate e bilanciate, a scelta con o senza telecomando

Type Line with output transformer Gain 14dB - 12dB (CD input) Input Type 6 lines inputs, 2 outputs, monitoring unbalanced or balanced Bandwidth 20 Hz - 50 KHz Input Impedance 4 : power supply + module by channel Tubes List ECC82 X 6, ECC83 X 2, EL84 X6, EF86 X 2 Dimensions 440 x 330 x 210 mm Weight 60 Kg Consumption 250 W each channel

Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 info@sinergy.us

Finale di potenza mono da 30 W in “Classe A”, su 8 ohm. Impedenza d'ingresso 100K, impedenza di carico selezionabile 1 - 16 ohm. Valvole 6550.

JA-30 The JA30 is a start range of pure class A monobloc amplifiers. It provides 30W thanks to its simple “push pull” power stage which can accept several tube types without any bias adjustment. Specifications Type Monobloc pure class "A" power amplifier Bias Automatic Power 30 W Rms per chanel Bandwidth @ -3dB 20 Hz - 46 KHz Sensitivity 500 mV Tubes List 6550/KT90/KT88 X 4, ECC82/12AU7 X 2, ECC83/12AX7 X 2 Consumption 125 W per channel

Finale di potenza mono da 40 W in “Classe A”, su 8 ohm.Impedenza d'ingresso 100K, impedenza di carico selezionabile 1 - 16 ohm. Valvole KT90.

Sensitivity 425 mV Type Monobloc pure class "A" power amplifier Bias Automatic Power 40 W per channel Bandwidth @ -3dB 20 - 29000 Hz ,Tubes List KT90 X 4, ECC82 X 2, ECC83 X 2, EL86 X 4. ,Consumption 150 W each mono amplifier

Finale di potenza mono da 60 W in “classe A”, su 8 ohm. Impedenza d'ingresso 100K, impedenza di carico selezionabile1 - 16 ohm. Valvole 6550.

Type Monobloc power amplifier Bias Automatic Power 60 Watt Rms per channel Bandwidth @ -3dB 20 Hz - 27 KHz Sensitivity 500 mV Tubes List 6550/KT90/KT88 X 8, ECC82 X 2, ECC83 X 2 Dimensions 260 x 625 x 240 mm Weight 35 Kg per mono amp Consumption 190 W each mono amplifier

Finale di potenza mono da 80 W in “classe A”, su 8 ohm. Impedenza d'ingresso 100K, impedenza di carico selezionabile 1 - 16 ohm. Valvole KT90.

JA-100 The first of a new range of JADIS amplifiers, the JA 100 offers a new driver system as well as an output transformer perfectly adapted to KT90 tubes. It is available in balanced or unbalanced modes. The conversion from one mode to another can be carried out by the Technical Service of all our distributors. Specifications Type Monobloc pure class "A" power amplifier Bias Automatic Power 80 W per channel Bandwidth @ -3dB 20Hz - 35 kHz Sensitivity 500 mV Tubes List KT90 X 8, ECC82 X 2, ECC83 X 2, EL86 X 4 Dimensions 260 x 625 x 240 mm Weight 74 Kg Consumption 250 W each channel

Finale di potenza mono da 160 W in “classe A”, su 8 ohm.Costruzione di ciascun finale mono in 2 chassis con alimentazione separata. Impedenza d'ingresso 100K, impedenza di carico selezionabile 1 - 16ohm.

Type Monobloc pure class "A" power amplifier with separate power supply Bias Automatic Power 160 W Sensitivity 1.2 V Tubes List KT90/6550/KT88 X 20, ECC82/12AU7 X 2, ECC83/12AX7 X 2 Dimensions 625 x 260 x 240 mm Consumption 440 W per channel

Finale di potenza mono da 200 W in “classe A”, su 8 ohm.Costruzione di ciascun finale mono in 2 chassis con alimentazione separata. Impedenza d'ingresso 100K, impedenza di carico selezionabile 1 - 16 ohm. Valvole KT90.

Sensitivity 500 mV Dimensions 625(D) x 260(W) x 240(H)mm each bloc Weight 34 Kg (each power supply) 24 Kg (each module) Type Monobloc pure class "A" power amplifier with separate power supply. Bias Automatic Power 170 W Bandwidth @ -3dB 20 - 21000 Hz Tubes List KT90 X 20, ECC82 X 2, ECC83 X 2, EL86 X 4. Consumption 520 W per channel

Finale di potenza mono da 400 W in “classe AB”, su 8 ohm. Costruzione di ciascun finale mono in 2 chassis con alimentazione separata. Impedenza di carico selezionabile 1 - 16 ohm.

Type Monobloc power amplifier with separate power supply Bias Manual - adjustment when the tubes type is changed Power 350 W Bandwidth @ -3DdB 20 - 25 000 Hz Sensitivity 710mV Tubes List KT90/6550 X 28, ECC82 X 6, ECC83 X 2, EF86 X 4 Consumption 1000 W per channel

Finale di potenza mono da 800 W in “classe AB”, su 8 ohm.
Costruzione di ciascun finale mono in 3 chassis con alimentazione separata. Impedenza d'ingresso 100K, impedenza di carico selezionabile 1 - 16 ohm. Valvole KT90.

Type Monobloc power amplifier with separate power supply Bias Manual - adjustment when the tubes type is changed Power 350 W Bandwidth @ -3dB 20 Hz - 40 KHz Sensitivity 1.2 V Tubes List KT90 X 32, ECC82 X 6, ECC83 X 2, Ef86 X 4 Dimensions PS: 450 x 1000 x 290 mm, module: 450 x 850 x 290 mm Weight PS: 110 Kg, module: 50 Kg Consumption 2600 W per channel

Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 info@sinergy.us

Compact Disc Player integrato. Meccanica Philips CDM12 ProII. Conversione D/A "Bitstream". Alimentazioni separate per le varie sezioni digitali, analogiche e di servomeccanica. Uscita digitale. Telecomando.Finitura Inox/black.

Symphonia CD The Symphonia CD player uses the mechanism base of the Philips L1210/65. The internal converter uses the bit stream technology for which the musicality is famous. It is equipped with a very efficient and stable power supply. It can be perfectly associated with an orchestra or a DA50. SpecificationsType CD player Mechanism L1210/65 Philips Output Type Analog and digital SPDIF on RCA connectors Input Impedance 1 chassis Dimensions 455 x 395 x 120 mm Weight 9 Kg Consumption 45 W

Compact Disc Player in due telai. Meccanica Philips CDM12 Pro II. Conversione D/A “Bitstream”. Sezione di uscita a valvole 2 x ECC82/12AU7. Alimentazione divisa per le varie sezioni digitali, analogiche e di servomeccanica. Uscita analogica su RCA. Telecomando. Finitura Inox/black.

Symphonia Evolution Tube Using the same mechanics as with the symphonia, this version is equipped with a tube output stage, giving the sound a very special warmth and softness, with a strict dynamic and accuracy.Specifications Dimensions 455 x 395 x 120 mm Weight 9 kg Type Tube CD player Mechanism L1210/65 Philips Output Type Analog on RCA connectors Input Impedance 1 chassis Tubes List 2 X ECC82/12AU7 Consumption 45 W

Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 info@sinergy.us

Sistema di trasporto CD, struttura antirisonante, caricamento dall'alto, meccanica Philips CDM12 ProII, alimentazioni separate per le varie sezioni digitali, analogiche e di servomeccanica. Uscite digitali coassiale/AT&T. Telecomando.

JD-3 The JD3 Basic is a top end integrated CD player, using all the JADIS mechanic technologies as far as suspension and the clamping system. SpecificationsType CD Player Mechanism CDM12 Pro2 Output Type Analog and digital SPDIF on RCA connectors Input Impedance 1 chassis Dimensions 455 x 405 x 120 mm Weight 14 Kg Consumption 45 W

Sistema di trasporto CD a valvole in 2 telai, 2 x ECC82/12AU7, struttura antirisonante, caricamento dall'alto, meccanica Philips CDM12 ProII, alimentazioni in telaio separato per le varie sezioni digitali, analogiche e di servomeccanica. Uscita analogica RCA. Telecomando.

JD-3 Evolution TubeThe JD3 tube is the essential CD player. Its tubes output stage and its separate power supply make it a unit very suitable for all audiophiles. Its musicality has lots of enthusiasts. SpecificationsDimensions 455(W) x 405(D) x 120(H) mm & 455(W) x 405(D) x 40(H) mm Type Tube CD player Mechanism CDM12 Pro2 Output Type Analog on RCA connectors Input Impedance 2 (separate power supply) Tubes List 2 x ECC82/12AU7

Sistema di trasporto CD "State of the Art", telaio sospeso su 3 punti con struttura antirisonante, caricamento dall'alto, alimentazione in chassis separato, uscite BNC/AT&T/XLR. Telecomando.

JD-1 Ultimate drive of the Jadis brand, the JD1 use the best mechanism and technology available. The CDM12 Pro2 laser head is isolated and integrated in a special plastic “star”, hung up by three calibrated springs. The chassis is in polished black stainless steel, with a golden base and spring support, the “star” is in black finish or with wood décor (handmade), making the specific aesthetics of this product. The JD1 has obtained the goldenear award from the American Review Absolute Sound. SpecificationsType CD Drive Mechanism CDM12 Pro2 Output Type SPDIF (cinch,BNC) AES/EBU (XLR) Optique (ST) Input Impedance 2 (separate power supply) Conumption 45 W

Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 info@sinergy.us

Convertitore Digitale/Analogico a valvole. Conversione D/A Cristal CS4328 risoluzione 18-bit. Stadio di uscita a valvole con ECC82. Stadio di alimentazione con doppi trasformatori. Uscite RCA, AES/EBU.

Dimensions 455(W) x 320(D) x 125(H) mm Type Digital to analog converter Input Type 3 : SPDIF on RCA, AES/EBU on XLR, optical on ST Output Type Unbalanced on RCA (JS2) OR balanced on XLR (JS2S) Input Impedance 1 chassis Tubes List ECC82/12AU7 X 2 (JS2), ECC82/12AU7 X 4 (JS2S). Consumption 20 W

JADIS JS 1MKIII €.12.000,00 Per prezzo scontato TELEFONARE/EMAIL
Convertitore Digitale/Analogico a valvole, costruzione in due telai con stadio d'alimentazione separato. 2 Convertitori D/A "Delta Sigma" 24bit/96KHz. Uscite RCA, AES/EBU.

Type Digital to analog converter Input Type 3 : SPDIF on RCA, AES/EBU on XLR, optical on ST Output Type Balanced and unbalanced Input Impedance 2 (separate power supply) Tubes List - 2 x 6DJ8/6922, - 2 x ECC82/12AU7, 1x EF86 , 1x EL86. Dimensions 455 x 320 x 125 mm Consumption 75W

Preamplificatori PHONOTelefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 Telefona o invia un e-mail per avere l'ultimo prezzo 0174 670100 info@sinergy.us

JADIS JPP-200 €.6.700,00 Per prezzo scontato TELEFONARE/EMAIL
Pre-preamplificatore, costruzione in due telai con stadio d'alimentazione separato a valvole.

JADIS DPMC €.4.400,00 Per prezzo scontato TELEFONARE/EMAIL
Stadio phono MC per DPL, DPL-2 e JPL.

DPMC The DPMC is a phono MM MC preamplifier with a level control. It uses 4 ECC83 in the preamplifier and to correct the RIAA stage. A tube regulated power supply ensures stability. This unit is ideal to connect an integrated amplifier of a phono stage. Specifications Dimensions 485(W) x 445(D) x 330(H) mm Weight 11 kg Type phono mc Gain 66 dB Input Type 1 MC/MM input Input Impedance 1 chassis Tubes List ECC83 X 4 , EL84 X 1, EF86 X1 Consumption 30 W

Per ordinare o avere gli ultimi prezzi aggiornati telefona al 0174 670100 o invia un E-mail a info@sinergy.us

Il presente listino sostituisce ed annulla ogni precedente.
Le caratteristiche e i prezzi indicati possono variare senza preavviso telefonare o inviare un e-mail per ulteriori domande e conferme sui prezzi sopra riportati. Prezzi franco nostro magazzino.
Tutti i marchi citati nel presente listino sono di proprietà e registrati alle rispettive Case Produttrici